• 한국농공학회지
• /
• 제12권2호
• /
• pp.1927-1936
• /
• 1970

This is a study on the influence of percent retaining of No. 10 sieve on soil compaction. Reviewing the test values in part 1 and part 2, a relative equation to predict maximum dry density and optimum moisture content was induced. Results of the study are as follow; 1. Maximum dry density increases according as percent retatining of No. 10 sieve increase untill 40%, but it decreases in more than 50%. 2. Maximum dry density has the greatest value at 25%, also it decreases according to increase or decrease at 25% in percent passing of No. 200 sieve. 3. Grain size distribution that Maximum dry density is largest, is 40% in 4.76mm to 2.0mm, 35% in 2.0mm to 0.074mm, 25% in lese than 0.074mm. 4. Correlation betwesn Maximum dry density and optimum moisture content made a curved line. The deviation between maximum dry density to be predicted from optimum moisture content and test values, is less than about 5%. 5. Range of deviation between optimum moisture content to be predicted from classification area and uniformity coefficient isless than about 20%, which belongs to range of moisture content that is correspondent with 95% of maximum dry density, generally.

• 한국멀티미디어학회논문지
• /
• 제13권2호
• /
• pp.196-204
• /
• 2010

본 논문에서는 핸드폰 조립 전의 키패드의 개별버튼에 불량 검사방법을 제안한다. 제안한 알고리즘은 키패드의 영역 분할, 폰트 영역 분할, 이동 및 회전의 처리과정을 통해, 동일 색상의 검사 및 등급 분류, 폰트 검사, 스크래치 검사로 이루어져 있다. 특히, 본 논문에서 제안한 영역분할 방법은 기존의 단순 문턱치를 기반으로 키패드의 경사나 곡면 모양에 기인한 휘도 변화에 대응하기 위해, 패드 영역만을 B-spline으로 근사화하여, 각 화소마다 다른 표면 문턱치를 적용하는 방법을 제시한다. 또한, 키패드의 회전 정보를 고유치 및 고유벡터를 사용하여 매우 빠르고 효율적으로 구하는 방법을 제시한다. 실험결과 제안한 방법은 실제 인라인 공정상에 적용하여 실험결과 우수한 성능을 보여준다.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.201-205
• /
• 2004

The digital color image can be distorted by noise for a transmission or other elements of system. It happens to vague of a boundary side in the division of a color image object, especially, boundary side of an input color image is very important because it can be determined to the division and detection element in pattern recognition. Therefore it is boundary part In this paper, it detects the optimal edge with applying this color image to WCNN algorithm, after it does level up a boundary side of a color image by using the adaptive morphology as the threshold of an input color image. Also, it is used not a conventional fixed mask edge detection method but variable mask method which is cal led a variable BBM. It is confirmed by simulation that the proposed algorithm can be got the batter result edge at the place of closing to each edges and having smoothly curved line.

• 한국어류학회지
• /
• 제30권3호
• /
• pp.175-180
• /
• 2018

가자미목 둥글넙치과에 속하는 1개체(표준체장 113.9 mm)가 제주도 남방 해역에서 저층트롤로 채집되었다. 매우 큰 입을 가지는 본 종은 주상악골의 후단이 눈보다 후방에 위치, 아래턱 전단에는 돌출된 3쌍의 날카로운 송곳니, 구강으로 돌출된 서골 말단부, 검은 가슴지느러미 그리고 무안측에 측선이 없는 특징들로 Kamoharaia megastoma와 잘 일치한다. 따라서 이종은 한국 미기록종으로 국명은 "큰입둥글넙치"로 제안한다.

• 천문학회지
• /
• 제53권1호
• /
• pp.1-7
• /
• 2020

The recent study of Chae et al. (2017) found a one-to-one correspondence between plasma blobs outflowing along a ray formed after a coronal mass ejection (CME) and small X-ray flares. In the present work, we have examined the spatial configuration and the eruption process of the flares that are associated with the blobs by analyzing EUV images and magnetograms taken by the SDO/AIA and HMI. We found that the main flare and the successive small flares took place in a quadrupolar magnetic configuration characterized by predominant magnetic fields of positive polarity, two minor magnetic fragments of negative polarity, and a curved polarity inversion line between them, which suggests that the formation process of the blobs may be similar to that of the parent CME. We also found that the successive flares resulted in a gradual change of the quadrupolar magnetic configuration, and the relevant migration of flaring kernels. The three-dimensional geometry and the property of the current sheet, that is often supposed to be embedded in an observed post-CME ray, seem to keep changing because of mutual feedback between the successive flares and the temporal change of the magnetic field configuration. Our results suggest that the observed post-CME rays may not reflect the characteristics of the current sheet responsible for the impulsive phase of the flare.

• 대한전자공학회논문지TC
• /
• 제38권10호
• /
• pp.24-33
• /
• 2001

패킷 통신에 있어서 주요 서비스 품질(QoS : Quality of Service) 요소로는 지연(delay), 지연 변이(delay variation), 패킷 손실율(loss rate) 등이 있다. 본 논문에서는 복수의 논리적 버퍼가 하나의 메모리 버퍼를 공유할 때, 논리버퍼의 손실율 성능을 향상시키기 위한 새로운 버퍼 할당 기법을 제안한다. 제안된 예방적 적응 한계치(PAT : Preventive Adaption Threshold) 버퍼 할당 기법은 기존의 동적 한계치 (Dynamic Threshold)기법에서 사용하는 패킷 폐기 한계치(threshold)의 직선적 변화 궤적과는 다른 한계치 동적 변화 궤적을 사용함으로써 패킷 손실율 성능을 개선하였다. 제안된 기법의 성능을 평가하기 위하여 기존의 무제어(NC : No Control), 고정 한계치(ST : Static Threshold), 동적 한계치(DT : Dynamic Threshold)등의 기법과 여러 측면에서 손실율 성능을 비교하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.324-329
• /
• 2010

The surroundings around subway are becoming more lively for project of CBD (an redevelopment project), however vibrations which are made through passing train cold spread buildings around. The structure-borne noise could be generated at the same time that makes people including developers and th citizens have negative viewpoint on railway. Especially, Seoul Metro 1-4 lines ar built alongside the road nearby houses and business district. That could make plenty of public resentments because of the structure-borne noise. Seoul Metro should make active alternative plans for their future urban environment projects which will be conducted. The case was Railway Facility which were conducted to minimize structure-borne noise from sharp curved track section (4 line, Sinyongsan~Ichon, R 250m). The section is adjacent to house district as near as 6.6m related with pusing international city project, the 4th urban environment project around international building, near Yongsan station. The interval of sleepers would be downsized in half with breaking existing case, and pad stiffness is reduced 4 ton from 10 ton. That makes structure-borne noise minimized because of vibrations are lowered about 19.1-23.0db. The structure above has remained for a year and a half from October, 2008, and had not any trouble to perform excellence with 80million ton rail accumulated tonnage.

• 한국가구학회지
• /
• 제19권5호
• /
• pp.319-327
• /
• 2008

As art of lamination by plywood got to be generally used, it became a suitable material for expressing live curves that were not able to be expressed on wood furniture made of plank and timber, as well as, openwork deep in curved space, heavy quality of material, and changing contour line-looking wave lines with different process angles. As an alternative, it would be good to build a full scale model, since it would provide practice in form-building and it would also provide a chance to correct the form. Less material can be used and reduce the cutting process by Properly trimming models made of soft formal structure such as Styrofoam Iso-pink and adhesive Styrofoam, and separating the layers and using them on shape cutting of plywood with the same thickness. And by attaching the model veneer that was used in shape cutting of the model and using it as a cutting guide, we can reduce the error of work and successively build the planned form. Since this study is about the need of a full scale model for a laminated wood model and an efficient process, this study concentrates more on process.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.133-140
• /
• 2017

Recently, the interest in the smart buildings is increasing in the architecture field. Among them, a research of facade design using a transformable system that can adjust the effect of the external environment is in progress. One of a typical example of the deployable system is a Scissors system that can change shape by using the geometric conditions of a unit member. Scissors system is a high-tech structural system which can construct the deployable plan and curved space by using the SLE (Scissors-Like Element) consisted of two Bar and Pivot. If the facade is designed by applying Scissors system, it is possible to maximize the performance and aesthetic effect of the structure by using a shape change of the line member. This paper presents a study of deployable facade design applying hybrid-typed Scissors system. A new deployable pattern of facade design is developed by combining Angulated Scissors system and tessellation pattern. Applying the deployable pattern a double skin construction method which is to add an outer wall for design, it raises three dimensional effects and can maximize the artistic essence of the change in shape upon deployment.