• 전기학회논문지
• /
• 제61권4호
• /
• pp.534-541
• /
• 2012

This paper tries to elicit an optimal generation mix of Korea. Two approaches, using the screening curve method and taking advantage of a generation expansion planning tool, WASP-IV, are applied in getting the mix. The data used in this study is based on the 5th basic plan for long-term electricity supply and demand. The Load Duration Curve, that is needed for applying Screening Curve Method(SCM), is made based on the load profile in 2010. In our using SCM, the nuclear plant's operation characteristic, carbon emission cost and spinning reserve are considered. In using WASP-IV to get the adequate generation mix, the base and target demand forecasts in the 5th basic plan are used and the carbon emission cost is also considered. In this paper, It introduces the domestic adequacy generation mix in 2024 though SCM and WASP-IV.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.344-349
• /
• 2005

This paper presents a geometrical error analysis of wheel curve generation method for micro aspheric surface machining using parallel grinding method. In aspheric grinding, wheel wear in process is crucial parameter for profile error of the ground surface. To decrease wheel weal parallel grinding method is adopted. Wheel and work piece (Tungsten carbide) contact point changes during machining process. In truing process of the wheel radius is determined by the angle and distance between wheel and truer. Wheel radius error is predominantly affected by vertical deviation between the wheel rotation center and the truer center Simulation for vertical error and wheel radius error shows same tendency that expected by geometrical analysis. Experimental results show that the analysis of curve generation method matches with simulations and wheel radius errors.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.129-137
• /
• 1999

A parametric curve interpolator has been proposed for machining curves instead of a linear interpolator in which curves are approximated by a set of line segment. The parametric curve interpolator is superior to linear interpolator in machining time and contour error and generate exact position commands directly from curve equations. In this paper, a new toolpath generation method is proposed based on the parametric curve interpolator. This method retains all the benefits of parametric curve interpolator and can bound the scallop height within a specified value. By interpolating curves and surfaces directly from the mathematical equations, the amount of data from CAD/CAM system to CNC controller can be significantly reduced. The proposed method was implemented on a CNC controller and was confirmed to give a better result than the other existing method.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.188-196
• /
• 2007

In this paper we propose an efficient offset curve generation algorithm for open and closed 2D point sequence curve(PS curve) with line segments in the plane. One of the most difficult problems of offset generation is the loop intersection problem caused by the interference of offset curve segments. We propose an algorithm which removes global as well as local intersection loop without making an intermediate offset curve by forward tracing of tangential circle. Experiment in computer sewing machine shows that proposed method is very useful and simple.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권11호
• /
• pp.518-524
• /
• 2005

This paper presents an analytical method for the reliability evaluation of distribution system, including the distributed generations. Unlike the large sized generations of transmission system, the distributed generations have complexities in analyzing and determining the operation. In the process of evaluate reliability, it can be shown that the analytical method is simpler than the Monte-Carlo simulation and the method using Load Duration Curve model is more accurate than that using peak load model. The modeling of distributed generation to analysis distribution system reliability using LDC is proposed in this Paper, and is compared with the MCS method as a result of case studies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.317-322
• /
• 2004

Productivity of shoe industry in Korea is still more excellent then that of China or Vietnam, But manufacturing technology and productive facility are underdevelopment in comparison advanced country. CAD/CAM system development, one of the most important technology, is totally nonexistent. specially, the automatic generation function and the grading function in shoe sole modeling are dependent of the foreign software. The CAD/CAM software only for shoe modeling is very expensive, so that it is going to weaken shoe industry of Korea. Therefore, We developed 3D gauge curve generation method using 2D NURBS curve in shoe sole modeling.

• 한국항행학회논문지
• /
• 제13권6호
• /
• pp.984-990
• /
• 2009

하프토닝은 단색으로 다양한 계조의 색단계를 표현하는 방법으로 인쇄 매체와 같은 분야에서 제한된 색으로 다양한 톤을 표현할 수 있도록 해주는 매우 중요한 영상처리기법이다. 본 논문에서는 공간채움곡선 (Space-Filling Curve)에 의한 하프토닝 방법의 대안으로 미로 생성 알고리즘에 기반한 새로운 하프토닝 방법을 제안한다. 기존의 공간채움곡선에 의한 오류 확산방법은 규칙적인 스캔 패턴으로 인해 해프토닝의 결과에도 규칙적인 패턴이 발생한다. 이러한 부분을 개선하기 위해 공간채움곡선 대신 미로의 경로를 사용함으로써 규칙적인 패턴을 제거하였다.

• 한국CDE학회논문집
• /
• 제11권3호
• /
• pp.205-210
• /
• 2006

Curve tessellation, which generates a sequence of points from a curve, is very important for curves rendering on a computer screen and for NC machining. For the most case the sequence of discrete points is used rather than a continuous curve. This paper deals with a method of tessellation by calculating the maximal deviation of a curve. The maximal deviation condition is introduced to find the point with the maximal chordal deviation on a curve segment. In the previous research a curve tessellation was tried by the subdivision method, that is, a curve is subdivided until the maximal chordal deviation is less than the given tolerance. On the other hand, a curve tessellation by sequential method is tried in this paper, that is, points are generated successively by using the local property of a curve. The sequential method generates relatively much less points than the subdivision method. Besides, the sequential method can generate a sequence of points from a spatial curve by approximation to a planar curve. The proposed method can be applied for high-accuracy curve tessellation and NC tool-path generation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.106-109
• /
• 1992

This paper Introduces the concept of the generation cost of generating utilities and its calculation methods. Also, the economic evaluation method using generation cost which is called as a screening curve method will be presented along with the benefits and disadvantages of this concept. Next, the least-cost electric utility planning techniques which is used very widely in many countries will be Introduced In comparison with screening curve method. In this aspects, the optimal dynamic mix can be determined as a result. By comparing these two concepts, we will get the concrete concept why the economic evaluation method using generation cost can not be used for the future generation expansion planning.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2472-2474
• /
• 2002

This paper describe a trajectory generation method for a two-wheeled mobile robot using cubic Bezier curve. It is proposed that the method to determine the location of control points which mainly affect the shape of curve, and constrains for two-wheeled mobile are examined. Simulation results show its traceability of the trajectory of mobile robot.