• 한국임상보건과학회지
• /
• 제4권4호
• /
• pp.662-670
• /
• 2016

Purpose. Because of a recent increase in use of soft contact lens at younger ages, in the present study, the correlation between corneal eccentricity and radius of curvature and fitting types of contact lens was investigated. Methods. The study evaluated the fitting status of targets through lens centration, push-up test, dynamic lag test and static lag test of lenses usually worn by 49 men and women (98eyes) in their 20s to 30s who put on soft contact lenses. After evaluation, the subjects were classified into 3 categories by fitting status(steep, aligment and flat). The radius of corneal curvature in the naked eyes was measured by using keratometer. Moreover the corneal eccentricity in the nasal side, temporal side, superior side and inferior side was measured by using the device capable of measuring the corneal eccentricity. Results. The radius of corneal curvature and corneal eccentricity of soft lenses worn by subjects were higher in the order of steep fitting and flat fitting, and the higher average corneal curvature radius and corneal eccentricity is intend to be more steep fitting(p=0.051, p=0.052). The corneal eccentricity showed a tendency to nasal fitting type at the higher eccentricity and temporal fitting type at the smaller eccentricity, statistically significant difference was observed(p<0.05). The study showed there were low correlation that nasal and temporal side at steep fitting, superior side at normal fitting and 4side(nasal, temporal, superior, inferior) at flat fitting, therefore when the corneal eccentricity changed the radius of corneal curvature also changed. The corneal eccentricity and the radius of corneal curvature showed statistically significant difference at 4side and each fitting types(p<0.05). Conclusions. The results of this study, the fitting status, of wearer are based on radius of corneal curvature and corneal eccentricity, and if lens fitting would be done considering that, it seems to be useful in a soft contact lens prescription.

• 한국가스학회지
• /
• 제14권3호
• /
• pp.46-52
• /
• 2010

삼지화염의 화염안정화 메커니즘 중 중요한 한 가지는 화염전파속도이다. 화염전파속도의 정량적인 규명을 위해 Bilger는 층류 유동이론에 근거하여 혼합분율 기울기에 비선형적으로 연관된 삼지화염전파속도를 제시하였다. 그러나 지금까지의 연구에서는 화염의 곡률 반경과 스칼라소산율에 따른 삼지화염 전파속도에 관하여 논의된 바가 없으며, 본 논문에서는 수치해석을 통해 화염전파속도에 따른 화염의 곡률반경과 스칼라소산율의 관계를 살펴보았다. 본 논문의 결과로 연료의 노즐 출구속도에 따라 화염전파속도가 거의 선형적으로 변화됨을 알 수 있었다. 또 화염전파속도에 따라 스칼라소산율은 비선형적인 감소를 보였으며, 곡률반경은 거의 선형적인 변화를 보임을 알 수 있었다. 또 스칼라소산율에 따른 곡률 반경의 경우 비선형적인 감소를 보였다. 따라서 화염전파속도와 스칼라소산율 및 화염의 곡률반경 사이에 직접적인 연관성이 있는 것을 확인하였다.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.39-46
• /
• 2015

In this research, we studied the pressure drop affecting on the internal surface roughness and the curvature radius of a U-tube, which is used for the cooling system in PWR(Pressurized Water Reactor). Using ANSYS-FLUENT, a commercial code based on CFD(Computational Fluid Dynamics) technique, we compared a Moody chart with the Darcy friction factor changed by a range of various surface roughness and Reynolds numbers of a straight pipe model. We studied the effect giving variation about a range of various surface roughness and the curvature radius of the full scale U-tube model. The material of the heat transfer tube is Inconel 690 used in the steam generator. We compared the velocity distribution of selected 4 locations, and derived the correlation between the surface roughness and the pressure drop for the U-tube of each representative curvature radius using the linear regression method.

• 한국음향학회지
• /
• 제23권3호
• /
• pp.192-196
• /
• 2004

스피커 댐퍼의 재질에 따른 휨강도와 기하학적 요소인 주름의 반경 및 각 주름의 곡률반경으로 탄성계수를 결정하여 실험치와 비교하였다. 그 결과 댐퍼의 탄성은 휨강도에 비례하고 원형주름의 반경에는 반비례하며 주름의 곡률반경의 제곱에 반비례함을 알 수 있었다. 또, 댐퍼의 안쪽은 주름을 작게 만들고 바깥쪽은 주름을 크게 만든 변형 댐퍼로 스피커를 제작함으로서 고음부의 감도가 증가하면서도 저음부가 강화되는 소형 스피커를 만들 수 있었다.

• 한국해양공학회지
• /
• 제24권6호
• /
• pp.61-70
• /
• 2010

This study presents free vibration analyses of perforates steel plates with various cutouts. Four different parameters (shape, size, curvature radius ratio, and rotation of cutouts) were considered to investigate the effects of those parameters on the free vibration characteristics, such as natural frequencies of the perforated steel plates. Three different shapes of cutouts are circle, square, and triangle, and the considered sizes are 5, 10, 15, 20, and 25 mm. For the triangular and square cutouts, the characteristic radii of the inscribed circles of those cutouts were defined. In addition, the curvature radius ratio was defined as the ratio of curvature radius of bluntness and the characteristic radius. Then, total seven different curvature radius ratios (0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1) were considered. To investigate the rotation effect of the cutouts, it was considered four rotations ($0^{\circ}$, $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$) for the square cutouts and three rotations (0, 15, and 30) for the triangular cutouts. All the free vibration analyses were conducted using a general purpose finite element program. From the analyses we found that the most influential parameter for the free vibration response of the perforated plates is the size of cutout. The other factors such as the shape, curvature radius ratio, and rotation are minors; they mainly change the natural frequency as long as the size effect is accompanied.

• 한국가스학회지
• /
• 제14권2호
• /
• pp.34-39
• /
• 2010

삼지화염의 화염안정화 메커니즘 중 중요한 한 가지는 화염전파속도이다. 화염전파속도의 정량적인 규명을 위해 Bilger는 층류 유동이론에 근거하여 혼합분율 기울기에 비선형적으로 연관된 삼지화염 전파속도를 실험으로 제시하였다. 그러나 지금까지의 연구에서는 화염의 곡률에 따른 삼지화염 전파속도에 관하여 논의된 바가 없기에, 본 논문에서 화염의 곡률에 따른 화염전파속도의 연관성을 제시하고자 하였다. 본 논문의 결과로 층류부상화염의 부상높이가 연료의 출구속도와 노즐의 직경에 따라서 결정됨을 알 수 있었다. 그리고 정지된 부상화염의 유동속도에 비례하는 연료의 출구속도에 곡률의 크기가 비례함을 보였고, 또 층류부상화염의 부상높이가 높아질수록 곡률반경의 크기가 커짐을 알 수 있었다. 따라서 곡률효과의 중요성이 인식되어야 하며 화염안정화 메커니즘을 표현하기 위해 제안된 Bilger의 제안식이 곡률효과를 고려하여 수정되어야한다.

• 한국안광학회지
• /
• 제17권2호
• /
• pp.127-133
• /
• 2012

목적: 각막곡률계를 이용하여 비접촉식으로 안경렌즈의 곡률반경을 측정할 수 있는 방법에 관하여 조사하고자 한다. 방법: 각막곡률계의 전면부에 -9.50 D ~ -11.50 D의 시력검사용 시험렌즈를 부착한 후 안경렌즈를 각막곡률계의 전면부에서 약 25 cm 가량 떨어진 곳에 설치한다. 안경렌즈의 위치를 조금씩 변경시키며 선명한 마이어상을 관찰하여 곡률반경을 측정한 후, 구면계를 이용하여 곡률반경의 보정공식을 만든다. 결과: 전면부에 시험렌즈를 부착한 각막곡률계를 이용하여 곡률반경 측정이 성공적으로 수행되었다. 측정한 곡률반경은 구면계 데이터를 이용하여 보정값으로 변환 되었으며, 보정값을 만드는 직선의 방정식 5가지를 얻었다. 임의의 여러 가지 렌즈들을 전면부에 시험렌즈가 부착된 각막곡률계로 측정한 후 직선의 방정식을 이용하여 계산한 결과 3.5% 미만의 오차로 측정이 가능함을 알았다. 결론: 전면부에 시험렌즈를 부착한 각막곡률계를 이용하여 비접촉식으로 안경렌즈의 곡률반경을 측정하는 것이 가능하며, 그 정확도는 렌즈메져보다 오히려 높은 것으로 나타났다.

• 한국조경학회지
• /
• 제28권2호
• /
• pp.10-16
• /
• 2000

The purpose of this study is to identify relationships between a central angle and a radius of curvature of divided roads in flat terrain of traditional villages, suggesting layout criteria for traditional villages: Nak-an, Sung-Eup, Ha-Whe. This study is sought to find the optimum model through the various SAS regression analyses. a regression analysis of this data was adopted to induce the relationship formula between a central angle of curve and a radius of curvature. Results of this study are as follows: 1) Most of the divided roads in traditional villages have a complex curve rather than a simple curve. 2) A central angle of curve has ranged from 11$^{\circ}$to 127$^{\circ}$, with a mean degree of 63.9. 3) In the lower level of central angle(11-40$^{\circ}$), the branch roads have distributed with a high frequency, but with a low frequency in the higher level of central angle(90-140$^{\circ}$). 4) A radius of curvature in the divided roads has ranged from 0.9m to 59.6, but half of the roads have concentrated on 1-6m of the curvature. 5) Compared to the result of hilly villages in previous study(Ahn, 1999), value of central angels in flat villages is lower than that of hilly villages, while a mean value of the curvature is higher than that of hilly villages. 6) A Non-linear regression analysis, resulting from the SAS application, was useful method to induce a relationship formula between a central angle and a radius of curvature in the branch roads. Our study's formula is as follow: R=100.3*EXP(-0.06*$\delta$)+3.91. 7) Our study model has less error than that of the Kishizuka's method, being applicable to a broader range of the branch roads. 8) A minimum radius of curvature in our study has showed 3.9m, suggesting to reconsider applications of the Kishizuka's(5.8m) in the footpass design, In the study for this presupposition model the efficiency and utility of it can be estimated to grow large according to how much and how far it includes both extremes of data. This study is for the application to a design in future through the numerical formula of divided roads of various traditional villages. The studies from now on will be about the quasi-hilly quasi-hilly village and hilly village supplementing these factors more.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.501-518
• /
• 2013

Apart from thinning of cortical layers, the local bone curvature, varying along bone periphery, modulates ultrasound waves as well, which is however often underestimated or overlooked in clinical quantitative ultrasound (QUS). A dedicated three-dimensional finite element modelling technique for cortical bones was established, for quantitatively exploring and calibrating the effect of local curvature of cortical bone on ultrasound. Using a correlation-based mode extraction technique, high-velocity group (HVG) and low-velocity group (LVG) wave modes in a human radius were examined. Experimental verification using acrylic cylinders and in vitro testing using a porcine femur were accomplished. Results coherently unravelled the cortical curvature exerts evident influence on bone-guided ultrasound when RoC/${\lambda}$ <1 for HVG mode and RoC/${\lambda}$ <2 for LVG mode (RoC/${\lambda}$: the ratio of local bone curvature radius to wavelength); the sensitivity of LVG mode to bone curvature is higher than HVG mode. It has also been demonstrated the local group velocity of an HVG or LVG mode at a particular skeletal site is equivalent to the velocity when propagating in a uniform cylinder having an outer radius identical to the radius of curvature at that site. This study provides a rule of thumb to compensate for the effect of bone curvature in QUS.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.85-94
• /
• 2008

The object of this study is to investigate the penetration characteristics according to the change of stacking sequences and curvature radius in the composite laminated shell. They are staked to [02/902]S and [0/902/0]s, their interlaminar number are two and four. We are manufactured to composite laminated shells with various curvature radius. Curvature radius of composite shell is 100, 150, 200mm and ${\infty}$(it's meaning flat-plate). In general, kinetic energy after impact-kinetic energy before impact increased linearly in all specimens. Absorbed energy increased linearly as the curvature increased, and absorbed energy of [02/902]S specimen, which is small interlaminar number, was higher than [0/902/0]s specimen.