The Compression Ratio Change Characteristics of Engine Horse Power Characteristics

압축비에 의한 엔진 출력 변화 특성

  • 양현수 (군장대학 자동차디지털공학부) ;
  • 임주헌 (서울자동차고등학교 자동차과)
  • Published : 2008.06.30

Abstract

The object of this study is to investigate the penetration characteristics according to the change of stacking sequences and curvature radius in the composite laminated shell. They are staked to [02/902]S and [0/902/0]s, their interlaminar number are two and four. We are manufactured to composite laminated shells with various curvature radius. Curvature radius of composite shell is 100, 150, 200mm and ${\infty}$(it's meaning flat-plate). In general, kinetic energy after impact-kinetic energy before impact increased linearly in all specimens. Absorbed energy increased linearly as the curvature increased, and absorbed energy of [02/902]S specimen, which is small interlaminar number, was higher than [0/902/0]s specimen.

Keywords

References

  1. LAURA.KISTLER, ANTHONY M, WAAS "Ipact response of cylindrically curved laminates including large deformation scaling study" Publish by Elsvier Science Ltd. Vol 21, pp. 61-75, 1998 https://doi.org/10.1016/S0734-743X(97)00031-6
  2. Dimitris A. Saravanos, Andreas P. Christoforou "Low-energy impact of adaptive cyindrical piezoelectric-composite shells", Internation Journal of Solids and structures Vol. 39, pp. 1757-1779, 2002 https://doi.org/10.1016/S0020-7683(02)00012-4
  3. Y. N. Kim and I. Y. Yang, "Impact Response and Damage of Composite Shell With Various Curvatures", Key Engineering Materials, Vol. 270-273, pp. 1911-1916, 2004 https://doi.org/10.4028/www.scientific.net/KEM.270-273.1911
  4. Y. N. Kim, K. H. Im and I. Y. Yang, "Characteristics of Impact Damages and Response in CFRP Composite Shells", Materials Science Forum, Vol. 465-466, pp. 247-252, 2004 https://doi.org/10.4028/www.scientific.net/MSF.465-466.247
  5. Im, K. H., Sim, J. K. and Yang, I. Y, "A Study on Impact Response Damage Behavior of CF/Epoxy Composite Laminates", Transactions of the KSME, Vol. 26, No. 5, pp. 835-842, 2002 https://doi.org/10.3795/KSME-A.2002.26.5.835
  6. Nam, H. W., Jung, S. W. and Han, K. S., "Stacking Sequence Effects on Indentation Damage Behaviors of Fiber Metal Lamiante", Transactions of the KSME, Vol. 26, No. 5, pp. 960-968, 2002 https://doi.org/10.3795/KSME-A.2002.26.5.960
  7. Cantwell, W. J. and Villanueva, G. Reyes, "The high velocity impact response of composite and FML-reinforced sandwich structures", Composites Science and Technology 63, pp. 1-20, 2003 https://doi.org/10.1016/S0266-3538(02)00090-8
  8. Krishnamurthy, K. S., Mahjn, P. and Mittal, R. K., "Impact Response and Damage in Laminated Composite Cylinderical Shells," Composite Structures, Vol. 59, pp. 15-36, 2003 https://doi.org/10.1016/S0263-8223(02)00238-6
  9. Wardle, B. L. and Lagace, P. A., "Behavior of Composite Shells under Transverse Impact and Quasi-Static Loading," AIAA Journal, Vol. 36, No. 6, pp. 1065-1073, 1998 https://doi.org/10.2514/2.481
  10. Wardle, B. L. and Lagace, P. A. "Importance of Instability in Impact Response and Damage Resistance of Composite Shells," AIAA Journal, Vol. 35, No. 2, pp. 389-396, 1997 https://doi.org/10.2514/2.106
  11. Cho, Y. J., Kim, Y. N. and Yang, I. Y., "Energy Absorption Chacracteristics of CFRP Laminated Shell Accoridng to High Speed Penetration", KSPE Proceeding, pp. 912-915, 2004
  12. Kim, Y. N., Kim, J. H. and Yang, I. Y., "Influence of Stacking Conditions on the Absorbed Energy Charcteristics of Composite Tubes", Vol. 18, No. 11, pp. 34-41, 2001
  13. Im, K. H., Park, N. S., Kim, Y. N. and Yang, I. Y., "A Study on Impact Characteristics of the Stacking Sequences in CFRP Composites Subjected to Falling-Weight Impact Loading," International Journal of Automotive Technology, Vol. 4, No. 4, pp. 203-211, 2003