• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.201-202
• /
• 2014

본 논문에서는 비대칭 하프브리지 컨버터의 비대칭 시비율을 개선한 컨버터를 제안한다. 일반적인 비대칭 하프 브리지 컨버터의 경우 홀드업 타임 조건 때문에 넓은 입력 전압 범위를 가지게 되고, 정상 동작시 스위치의 비대칭 동작이 심화 된다. 이러한 스위치의 비대칭 동작으로 변압기의 자화 전류 옵셋이 증가하고 변압기 부피 및 2차측 정류기들의 전압 불균형이 심화되어 컨버터 효율이 감소하게 된다. 하지만 제안된 컨버터에서는 보조 스위치와 보조 커패시터를 이용, 변압기의 권선비를 조정하여 정상 동작 시 정류기들의 비대칭을 저감하였고, 변압기의 자화 전류 옵셋을 감소시켜 높은 효율을 달성하였다. 제안된 컨버터의 타당성을 검증 하기 위해 300W 프로토 타입을 제작하여 실험을 진행 하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1418-1423
• /
• 2007

The topology of LLC half bridge resonant converter provides ZVS characteristic. The voltage stress and current stress are smaller than that of the general resonant converters. So the LLC HB resonant converter can be considered as a optimal circuit for the notebook computer adapter. In the adapter design, we should consider the weight, the size and the overheat of the adapter. Thus the higher efficiency is an essential particular. First of all, the optimal design of transformer is the most important facts. Some parameters should be considered in order to get the highest efficiency. The adapter is designed through the considering of these parameters including the PFC circuit as the pre-regulator. It converts AC line input into about DC 390V link voltage of the LLC HB converter input and the converter has 16V/90W ratings. The efficiency measured is about up to 93%.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.444-450
• /
• 2008

There are several ways to bond to building grounding systems for reducing GPR(ground potential rise) and EMI resulting from power system faults or lightning stroke to building. In order to verify effective bonding practice, the GPR and voltage of equipment due to the direct stroke to building are calculated with ATP-EMTP model for transformer, transmission line and MOV(Metal oxide varistor). The simulated model shows a satisfactory accuracy compared with experimental result for the $8/20{\mu}s$ simulated current pulse. It is observed that separate grounding can cause dangerous voltage to the building equipment and the performance of surge protective device can improve when it is installed to the protected equipment in distance as short as possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.240-241
• /
• 2006

변류기의 제조공법에는 conventional 방식이 있다. Conventional 방식은 부분적으로 불규칙한 경화에 의한 굴곡형태, 단기간에 금형의 손상이 많이 가고, 제한된 생산량으로 금형이 많아야하고 또한 금형의 예열이 필요한 단점을 가지고 있다. 이를 개선한 APG(Automatic Pressure Gelation) 주형방식은 제품의 외관을 매끄럽게 하고, 자동화에 따른 금형수명을 연장하고, 1일 생산량이 conventional 방식보다 8배나 많고 제품의 후경화 설비만 필요한 장점이 있다. 생산성 향상 및 제조원가 절감을 위하여 새로운 제조공법인 APG 방식의 제조공법에 맞는 원재료 및 작업조건을 표준화하고 한국전기연구원이 보유하고 있는 고가장비인 내후성시험기, 성분분석시험기, 충격시험기, 단락시험설비 등을 이용하여 시제품에 대한 평가 시험을 하여 제품의 품질을 향상하고 안정성을 확보함으로써 국내 기업의 기술 경쟁력을 향상하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.325-327
• /
• 1995

A new gate drive circuit of classic converter for a switched reluctance motor is presented. Conventional gate drive circuit usually consists of the isolated power supplies and signal transferring devices for isolation, such as photo coupler, pulse transformer, and gate drive chips. The proposed gate drive circuit consists of resistors, capacitors, and zenor diodes without isolated power supplies, that make the drive circuit simple and reduce the material cost. The operational modes are classified and analyzed. The characteristics of the phase current and the gate signal of upper switches is investigated with the variation of duty ratio through the experiments.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.195-197
• /
• 1995

In this paper, for a constant switching frequency, the configuration and the control strategy of the resonant buck-boost type converter are proposed by the combination of zero voltage switching(ZVS) and zero current switching(ZCS) with PWM method. Also, in the configuration of power control circuit, transformer is not used in the viewpoint of economy. And the circuit has fewer power switching elements than a general resonant power converter, simulation results and experiments make show the advantages mentioned.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.15-16
• /
• 2016

This paper proposes an isolated DCDC converter that consists of unregulated LLC resonant converter and non-isolated synchronous buck converter for battery charger of energy storage systems application. The unregulated converter operates as transformer with fixed duty ratio and switching frequency. The synchronous buck converter is installed in the output of the LLC resonant converter. And the converter charges and discharges the battery by controlling a current of battery. The proposed converter can get the high efficiency by separating function. This paper explains design of an unregulated converter and synchronous converter.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.623-628
• /
• 2009

There is an increasing demand for efficient high power/weight auxiliary power supplies for use on high speed traction application. Many new conversion techniques have been proposed to reduce the voltage and current stress of switching components, and the switching losses in the traditional pulse width modulation(PWM) converter. Especially, the phase shift full bridge zero voltage switching PWM techniques are thought most desirable for many applications because this topology permits all switching devices to operate under zero voltage switching(ZVS) by using circuit parasitic components such as leakage inductance of high frequency transformer and power device junction capacitance. The proposed topology is found to have higher efficiency than conventional soft-switching converter. Also it is easily applicable to phase shift full bridge converter by applying an energy recovery snubber consisted of fast recovery diodes and capacitors.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.321-324
• /
• 2008

Recently, there is an increasing demand for efficient high power/weight auxiliary power supplies for use on high speed traction application. many new conversion techniques have been proposed to reduce the voltage and current stress of switching components, and the switching losses in the traditional pulse width modulation(PWM) converter. Among them, the phase shift full bridge zero voltage switching PWM techniques are thought most desirable for many applications because this topology permits all switching devices to operate under zero voltage switching(ZVS) by using circuit parasitic components such as leakage inductance of high frequency transformer and power device junction capacitance. The proposed topology is found to have higher efficiency than conventional soft-switching converter. Also it is easily applicable to phase shift full bridge converter by applying an energy recovery snubber consisted of fast recovery diodes and capacitors.

• Journal of Information Processing Systems
• /
• v.19 no.1
• /
• pp.80-88
• /
• 2023

RGB-thermal (RGB-T) tracking using unmanned aerial vehicles (UAVs) involves challenges with regards to the similarity of objects, occlusion, fast motion, and motion blur, among other issues. In this study, we propose dynamic tracking aggregation (DTA) as a unified framework to perform object detection and data association. The proposed approach obtains fused features based a transformer model and an L1-norm strategy. To link the current frame with recent information, a dynamically updated embedding called dynamic tracking identification (DTID) is used to model the iterative tracking process. For object association, we designed a long short-term tracking aggregation module for dynamic feature propagation to match spatial and temporal embeddings. DTA achieved a highly competitive performance in an experimental evaluation on public benchmark datasets.