• 한국항행학회논문지
• /
• 제20권5호
• /
• pp.482-489
• /
• 2016

방사선 환경에서 광섬유형광체를 이용하면 감마선을 광다이오드로 검출할 수 있다. 이와 같이 감지된 전류를 전압으로 변환하여 신호 처리하는 장치를 전류모듈 또는 TIA라 하며, 선형적으로 변환시키는 것이 아주 중요하다. 본 연구에서는 변환선형성이 우수하고 잡음이나 옵세트 전압을 최소화하는 미세전류모듈을 연구하여 제품을 개발하였다. 또한 본 논문에서는 전류-전압 변환기인 미세전류모듈을 개발 및 제작함에 있어서 정밀도와 정확도를 요하는 전류모듈을 연구, 개발, 제작하는 과정에 많은 노력을 기울였다. 미세전류모듈의 이론을 정립한 후 회로를 개발하고 그 전류모듈을 테스트한 결과 전류-전압 변환의 선형성이 기존의 문헌에 제시된 제품들과 비교하여 광범위에 걸쳐서 크게 향상되었음을 확인하였다. 관계기관의 입회 하에 본 제품을 실제 감마선 존재 환경에서 테스트 및 적용해본 결과 관련 요건에 적합함을 인정받았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.70-71
• /
• 2009

In recent years, a importance of EMS(Electromagnetic Susceptibility) is increased with the spread of a communication device significantly. The compatibility of EMS is evaluated by conduction and radiation of EMI(Electromagnetic Interference). In this paper, a leakage current sensing controller which is considered of industrial EMS is developed. The developed system is consisted of power module, sensing module of leakage current, processer module, display module and communication module. The developed system is evaluated the compatibility of EMS by conduction and radiation of EMI. In evaluation results, the developed system is compatible to the standard of industrial EMS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.513-514
• /
• 2006

This paper presents the temperature characteristics with the structure of 18 kV surge arresters for distribution system. Three types of polymer arrester were fabricated and a ceramic arrester was also prepared to investigate. Below $100^{\circ}C$, three types of polymeric arresters exhibited almost the same leakage current value, but above $100^{\circ}C$, the polymeric arresters whose module was injected into polymeric housing with the grease exhibited the highest leakage current. In contrary, the arresters being manufactured by directly injecting silicone rubber onto arrester module exhibited the lowest leakage current. The rapid rising of leakage current of the polymeric arresters with the grease at $120^{\circ}C$ was because of the deterioration of the insulation characteristics of the grease between the FRP module and the silicone housing. All polymeric arresters exhibited the same surface temperature characteristics but the ceramic arresters was slower than the polymer arrester in heat emission despite the lowest leakage current. It was thought that the air layer between ZnO varistor blocks and the ceramic housing prevented the heat emission.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.47-54
• /
• 2006

The current power generation is very suitable renewable energy for the application to Korean western and south coastal regions where characterized as having high current speed. Being different from tidal power generation that needs tremendous dam structure to preserve water, the current power generation utilizes the ocean current flow without damaging to estuary area and its environment. There are still many areas to understand the characteristics of current power generation for the actual field installation. As designing muti module with several rotors, the interaction between rotors will occur that would affect the efficiency and RPM of each rotor. In this study, the interactions caused by gaps between rotors in multi module are studied.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.39-43
• /
• 2019

The breaking of a circuit in DC grid could pose a challenge because of the absence of zero-crossing instant for both current and voltage when a fault occurs. An additional fault current limiting function will be very helpful for reducing the burden of the DC circuit breaker by limiting the fault current to a reasonable value. In this paper, we studied the overcurrent characteristics of several HTS conductors so that we could use the selected conductors for the basic design work of a resistive type fault current limiting module as a part of the circuit breaking system. According to the short-circuit test results, we suggested and compared two different basic design parameters of the HTS fault current limiting module, which will be connected in series to the DC circuit breaker.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.63-71
• /
• 2016

Installed PV module in field is affected by shading caused by various field environmental factors. Bypass diodes are installed in PV module for preventing a power loss and degradation of PV module by shading. But, Bypass diode is easily damaged by surge voltage and has often initial a defect. This paper propose the electric characteristic variation and the power prediction of PV module with damaged bypass diode. Firstly, the resistance for normal bypass diode and damaged bypass diode of resistance was measured by changing the current. When the current increases, the resistance of normal bypass diode is almost constant but the resistance of damaged bypass diode increases. Next, To estimate power of PV module by damaged bypass diode, the equation for the current is derived using solar cell equivalent circuit. Finally, the derived equation was simulated by using MatLab tools, was verified by comparing experimental data.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.695-703
• /
• 2019

본 논문에서는 배터리 팩을 구성하는데 있어 높은 전압의 직렬 연결된 배터리 모듈의 병렬 연결에서 발생할 수 있는 순환 전류를 제거하는 방법을 제시하였다. 제거 방법은 배터리 팩의 구성상에 있어서 양방향 DCDC 컨버터와 슈퍼 캐패시터를 이용한 VVSM(Variable Voltage Variable Module)이라고 명명한 모듈을 직렬 연결된 배터리 셀들 중 하나 대신에 삽입하는 방식인데 VVSM은 이 모듈에서 마치 우리가 원하는 전압으로 제어할 수 있는 배터리 셀처럼 동작한다. 전압을 가변할 수 있는 배터리 셀(VVSM)을 이용하여 직렬 연결된 배터리 모듈의 전압을 아주 손쉽게 일치시킬 수 있었다. 제시한 방법을 증명하기 위해 배터리를 모형화한 모델을 이용하여 모의 실험을 시행 하였다. 또한 직렬 연결된 배터리 셀 만으로 된 모듈과 제안한 VVSM이 적용된 모듈을 실제 제작하여 두 모듈을 병렬 연결하여 둘 사이에 순환 전류를 측정하여 비교함으로써 제안된 방법이 효과적으로 순환 전류을 억제할 수 있음을 검증하였다.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.31-41
• /
• 2014

This paper proposes the configuration of photovoltaic(PV) module considering the environment conditions of the PV system. The PV system is consisted of the series-parallel connection of the PV module. When shadows or changes of the radiation or an electrical characteristic in the solar cell are happened to PV system, the serious power loss will occur. If the PV module connected in series has the shadows, the output current is restricted to current of shaded PV module. Also if shadow is occurred to the parallel connection PV module, the output voltage is limited to voltage of shaded PV module. These problems are caused power loss. Therefore, this paper proposes the method that makes the output power of the PV module equalize by reconfiguration of PV module using the switching considering these environment conditions. A validity of the method proposed in this paper proves through comparing with performance of conventional PV module.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.13-17
• /
• 2012

KEPCO Research Institute has been researching a Superconducting Fault Current Limiter (SFCL) which is considered one of solutions of fault current problems with Korea Institute of Machinery & Materials (KIMM) and Hanyang University since 2011. In this paper, we fabricated a current limiting module and conducted electrical short circuit tests for checking the validity of the transmission level SFCL design. Based on the short circuit characteristics of the second generation High Temperature Superconductor (HTS), we analyzed the short circuit characteristics of 3 parallel connected superconducting wires. The structure of the HTS wire is as follows: the stainless steel stabilizer of $100{\mu}m$ is laminated on the superconductor layer and under the substrate, both of which are electrically jointed with solder. We fabricated the current limiting module which has 40 series and 6 parallel connections and studied the short circuit characteristics of the module under various voltage levels.