• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.44-47
• /
• 2008

Organic semi-conductive materials have characteristics such as the advantages of easy formability, low-cost and diversity along with moderate semi-conductive properties. In this paper, we developed a flexible organic-inorganic hybrid solar cell fiber. First, we made a solar cell on the glass and attached the solar cell on the glass fiber similarly. In the latter case, thermal deposition method was employed in order to effectively apply ITO onto fiber surface. The amount of ITO was controlled by varying the temperature from 25, 150 to $300^{\circ}C$. Optimum result was obtained at $150^{\circ}C$ where maximize the deposition amount without significant decomposition of ITO. Despite of maximum open circuit voltage of 0.39V, the resulting current was quite unstable and weak, limiting realistic applications. It was, however, concluded that the flexible solar cell fiber developed showed a possibility of low-weight application from functional clothing for military to space suit mainly due to flexibility and thus wear ability.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.416-422
• /
• 2016

We have investigated the effects of applied potential, deposition time and electrolyte types on shapes and physical properties of Cu dendrites by potentiostatic electrodeposition. Finer shape of dendrites was observed at less cathodic potential by 100mV than at the limiting current, due to 'effective overpotential'. The shape of copper dendrite is related to the deposition time, too. The dendrite depositing for 10 min showed the finest shape. The finer dendrite has the less apparent density and the larger specific surface area. Dendrite from chloride solution has the lowest density and the largest surface area among three plating solutions, sulfate, chloride and pyrophosphate.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.296-301
• /
• 2005

The effect of aqueous methanol on the catalytic properties of porcine pancreatic lipase has been investigated. The k$_{CAT}$, values for the hydrolysis of N$^{alpha}$-benzyloxycarbonyl-L­lysine p-nitrophenyl ester at 0$^{circ}$C increased in a linear manner with increasing methanol concentration. However, the K$_{M}$ values were not influenced at methanol concentrations lower than $30\%$ and then began to increase at higher concentrations in an exponential fashion. Based on product analysis, the increase in k$_{CAT}$, with increasing methanol concentration can be accounted for by nucleophilic competition of methanol for the acyl enzyme intermediate, indicating that the rate-limiting step of the porcine pancreatic lipase-catalyzed reaction is deacylation under current experimental conditions. The exponential increase in K$_{M}$ at methanol concentrations higher than $30\%$ is attributed to the hydrophobic partitioning effect on substrate binding. There was no loss of lipase activity over a 4 h period in $60\%$ methanol concentration at pH$^{circ}$ 5.5 and 0$^{circ}$C. By monitoring the intrinsic fluorescence and absorbance, no evidence for structural changes by methanol was observed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.119-130
• /
• 2004

The objective of this study was to develop a school uniform sizing system with high coverage rate for middle school boys, who are in the stage of rapid growth, by identifying problems in existing school uniform sizing systems through surveys of students and uniform manufacturing companies, and analyzing juveniles' physical sizes. For this purpose. the study conducted a survey about how middle school boys choose their uniform sizes, and what complaints they have on the size of the uniforms. In addition, it was investigated what is the current state of uniform manufacturing and sizing systems through a survey of uniform companies, and the study identified problems in the size of school uniforms by comparing physical sizes of juveniles' aged 14 to 16 with the sizing systems of the companies and KS standards in 1997. Juveniles' physical data was a part of the material of the national anthropometric data in 1997. Using the two-way distribution of juveniles' height-bust girth and height-waist girth, this study established the sizing system by increasing the number of sizes for the short interval where juveniles' physical sizes are densely distributed whereas limiting the number of sizes for the long interval where juveniles' physical sizes are rarely distributed, considering the difference between companies' standard and KS' standard.

• Reproductive and Developmental Biology
• /
• v.36 no.2
• /
• pp.103-108
• /
• 2012

Anestrus is one of the most important production limiting disorders in dairy buffaloes and its underlying causes have been a current topic of studies. The objectives of this study were to explore the causes of anestrus in buffaloes with the application of ultrasonography. Two examinations were performed by transrectal ultrasonography at 12 days apart in buffalo cows that were not seen in oestrus at 60 or more days postpartum. As high as 54.5% buffaloes had silent ovulation and 45.5% suffered from the true anestrus with ovarian dysfunction. The duration of anestrus after calving was 60~90, 91~120, 121~180 and 181~365 days in 27%, 32%, 18% and 23% buffalo cows, respectively. Treatment with prostaglandin of cyclic buffalo cows with a corpus luteum (72.7%) resulted in higher estrous rate as compared with close observation of estrus (23.1%) by the farmer (p=0.021). Acyclic buffalo cows without any corpus luteum on ovaries were successfully treated with gonadotropin releasing hormone (70%), resulting in higher estrous detection rate than those treated with a vitamin-mineral mixture (20%) (p=0.035). In conclusion, poor heat detection due to silent ovulation is the most important cause of apparent anoestrus in buffaloes; however the percentage of the true anestrous is also quite high in postpartum buffaloes.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.87-91
• /
• 2000

Metal ion complex of poly(N-(2,4-imidazoly)ethyl)maleimide-alt-l-octadecene (IMO-O) polymer used to confirm the possibility of molecular device made by Langmuir-Blodgett(LB) method. Electrical properties of the metal ion complex LB film were investigated using Metal/Insulator/Metal(MIM) structure. In the surface pressure-area($\pi$-A) isotherm of IMI-O polymer, the surface pressure at collapse point has a difference due to the interaction between polymer and metal ions. And the complex between polymer and metal ions could be verified through the investigation by Raman spectroscopy. In the current-voltage(I-V) property, the conductivity change of IMO-O polymer complexes due to the kinds of metal of metal ions couldn't be observed. However, the limiting area of molecules was changed by the concentration of the metal ions and the conductivity was increased with the occupied molecular area.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.680-686
• /
• 1995

It has been known that water-side corrosion of fuel rods in nuclear reactor is accompanied with the loss of metallic wall thickness and pickup of hydrogen. This corrosion is one of the important limiting factors ill the operating life of fuel rods. In connection with the fuel cladding corrosion, a device to measure the water-side oxide layer thickness by means of the eddy-current method without destructing the fuel rod was developed by KAERI. The device was installed on the multi-function testing bench in the nondestructive test hot-cell and its calibration was carried out successfully for the standard rod attached with plastic thin films whose thicknesses are predetermined. It shows good precision within about 10% error. And a PWR fuel rod, one of the J-44 assembly discharged from Kori nuclear power plant Unit-2, has been selected for oxide layer thickness measurements. With the result of data analysis, it appeared that the oxide layer thicknesses of Zircaloy cladding vary with the length of the fuel rod, and their thicknesses were compared with those of the destructive test results to confirm the real thicknesses.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.4
• /
• pp.233-241
• /
• 2011

The article describes actions and strategies to obtain higher productivity on maritime automobile terminals. The main focus is on elaboration of efficient and effective organizational structure to model and implement short-term, mid-term and long-term strategies. In addition, with an empiric approach we combined the analyses of current findings in important scientific papers and our acknowledgments in practical research of north Adriatic maritime automobile terminals. The main goal is to propose actions towards increasing system's productivity. Based on our research of the north Adriatic maritime automobile terminals and with Lambert's model an in-deep analysis of limiting factors, user's expectations and possibilities for productivity increase has been performed. Moreover, with our acknowledgments a three-level decision-support model is presented. With an adequate model implementation it is possible to efficiently develop and implement different strategies of productivity measurement and productivity increase, especially in the fields of internal transport productivity, entrance/exit truck gates operations and wagon manipulations. According to our observation a significant increase might be achieved in all three fields.

• Transactions of Materials Processing
• /
• v.23 no.7
• /
• pp.413-418
• /
• 2014

The current study presents experimental and numerical results on the effect of ultrasonic vibrations on a cylindrical cup drawing of a cold rolled steel sheet(SPCC). An experimental apparatus, which can superimpose high frequency oscillations during deep drawing, was constructed by installing on the tooling ultrasonic vibration generators consisting of a piezoelectric transducer and a resonator. Conventional and vibration-assisted cylindrical deep drawing tests were conducted for various drawing ratios, and the limiting drawing ratios(LDR) for both methods were compared. To evaluate quantitatively the contribution from the ultrasonic vibrations to the reduction of friction between tools and material finite element analyses were conducted. Through a series of parametric analyses, the friction coefficients, which minimized the differences of punch load data between the experiments and simulations, were determined. The results show that the application of ultrasonic vibration effectively improves the LDR by reducing the friction between the tools and the material.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.420-425
• /
• 2016

N-doped carbon nanofibers as catalysts for oxygen-reduction reactions are synthesized using electrospinning and carbonization. Their morphologies, structures, chemical bonding states, and electrochemical performance are characterized. The optimized N-doped carbon nanofibers exhibit graphitization of carbon nanofibers and an increased nitrogen doping as well as a uniform network structure. In particular, the optimized N-doped carbon nanofibers show outstanding catalytic activity for oxygen-reduction reactions, such as a half-wave potential ($E_{1/2}$) of 0.43 V, kinetic limiting current density of $6.2mAcm^{-2}$, electron reduction pathways (n = 3.1), and excellent long-term stability after 2000 cycles, resulting in a lower $E_{1/2}$ potential degradation of 13 mV. The improvement in the electrochemical performance results from the synergistic effect of the graphitization of carbon nanofibers and the increased amount of nitrogen doping.