• 전기학회논문지
• /
• 제62권10호
• /
• pp.1465-1469
• /
• 2013

The resent developed high speed train called HEMU-430X (Highspeed Electric Multiple Unit - 430km/h eXperiment) recorded a 421.4 km/h in Kyoungbu high speed line in Korea. A verity of measurement systems are used to check the performance between pantograph and catenary system. An innovative measurement system is adopted to check the current of catenary wire in the track side during HEMU-430X test running. This paper presents the measurement results of catenary current in kyoungbu high-speed line and describe its utilizing technology in the experimental results of catenary current. In order to analyze field testing results, the current ratio between contact and catenary current have been analyzed by means of Carson-Pollaczek equation. And the current wave forms between catenary and contact wire are presented based on the simulation results.

• 한국안광학회지
• /
• 제12권1호
• /
• pp.69-74
• /
• 2007

펄스형 방전플라스마장치에서 축방향 플라스마 curren sheath의 속력을 측정하였고, snowplow 모델과 비교하였다. Current sheath의 속력은 $10^6cm/s$로 측정되었다. 측정된 속력 중에서 가벼운 기체인 수소와 헬륨은 모델의 이론과 비슷한 결과가 나왔으나 무거운 기체인 아르곤은 이론과 조금 벗어났다. 그 이유는 current sheath의 불안정성 때문으로 추정된다.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3184-3189
• /
• 2010

펌프의 성능을 개선하기 위해서는 펌프의 회전수 정보를 획득할 필요성이 있으나, 일반적으로 연료펌프는 연료탱크 안에 내장되어 그 회전수를 측정하기에 어려움이 있다. 연료 펌프의 회전수는 크게 가속도 센서를 이용하는 방법과 전류센서를 이용하는 두 가지 방법이 있다. 가속도 센서를 이용하는 방법은 연료 펌프의 진동수를 측정하여 회전수로 계산하는 방법이며, 전류 센서를 이용하는 방법은 펌프모터의 주기적 전압방출 특성을 이용하여 회전수를 계산하는 방법이다. 본 연구에서는 전류센서를 가속도 센서와 동시에 장착하여 다양한 측정 조건에 대한 실험을 수행하였다. 결론적으로 전류센서로도 연료펌프의 회전수를 정밀하게 측정하는 것이 가능하였으며 특히 낮은 회전수 영역에서는 가속도센서 대비 강건한 계측특성을 보였다. 오차 1% 이내의 회전수를 측정하기위하여, 가속도센서는 데이터 저장간격 0.5Hz 이하의 설정이 필요하였으며, 전류센서는 데이터 저장간격 2.0Hz이하의 설정이 필요하였다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.143-148
• /
• 2013

When the fault occurs in power system, the fault-current exceeds breaking capacity of the circuit breaker. So, reliablity of the power system is decreased sharply. Superconducting fault-current limiter (SFCL) is operated without impedance in normal state. The fault-current is limited by its impedance during the fault condition. However, the SFCL has several weak points such as huge size, high-price, liquid-nitrogen operation for the real power system. In this paper, We suggested the high-speed interrupter to limit the fault-current in case of the single line-to-ground fault. In addition, we compared the high-speed interrupter with the SFCL to ensure the operation reliability. The proposed interrupter detected the fault-current through the CT, and the power was supplied by operation of the SCR control system. In this experiment, the power of high-speed interrupter was applied after the 4.8[msec] from fault instant. The on-off operation of the interrupter was started after half-cycle from the fault. The fault-current was flowed into the impedance element by the switching operation of the high-speed interrupter. So, the fault current was limited within one cycle, and then it didnt exceed the capacity of a circuit breaker. We confirmed that there was slight difference between the SFCL with high-speed interrupter in terms of limiting-time of the fault-current and switching speed of the SCR. The high-speed interrupter was considered to be more efficient than the SFCL in size, cost or reliability.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.96-101
• /
• 2015

Induction machine requires a rotating magnetic field for energy conversion. The current to generate a rotating magnetic field is the magnetization current. This magnetization current corresponds to the reactive power. Reactive power is higher than active power at start-up of induction motor. As the rotation speed is increased, their magnitudes are reversed each other. The active power is higher than the reactive power at near the synchronous speed. This paper is dealing with the analysis result for the changes of the magnetizing current and reactive power when the induction machine is operating as a motor or generator near synchronous speed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.150-151
• /
• 2017

This paper deals with the suppression of subharmonic current oscillation of V/F controlled high speed induction motor drive in turbo blower applications. High speed induction motor has a relatively low stator impedance for high speed operation and therefore the dc link voltage ripple may result in subharmonic current oscillation at the steady state in high speed operation. This paper shows that the subharmonic oscillation is caused by the dc link voltage ripple and also proposes the suppression method, which generates the compensation voltage through the proportional current controller to reduce the subharmonic current oscillation. The simulation and experimental results show that the proposed suppression method reduces the subharmonic current oscillation to the acceptable low level in turbo blower applications.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2004년도 춘계학술대회 학술발표 논문집 제14권 제1호
• /
• pp.454-457
• /
• 2004

In this paper, control method proposed for effective speed control of the induction motor indirect vector control. For the induction motor drive, indirect vector control scheme that controls torque current and flux current of the stator current independently so that it can have improved dynamics. Also, neuro-fuzzy algorithm employed for torque current control in order to optimal speed control The proposed neuro-fuzzy algorithm can be applied to the precise speed control of an induction motor drive system or the field of any other power systems.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.57-60
• /
• 2008

목적: 펄스형 방전플라스마 포커스 장치에서 반경방향 플라스마 current sheath 의 속력을 측정하였다. 방법: 측정에는 시간분해 분광분석법과 로고프스키 코일이 사용되었다. 결과: 15 kV의 방전전압과 수십 torr의 He과 Ar의 기체기압에서 $10^5$ cm/s의 속력이 측정되었으며, 기체기압이 증가할수록 current sheath의 속력은 감소되었다. 결론: 최적조건인 수 torr의 기압에서는 $10^7$ cm/s의 속력이 나올 것으로 예상된다.

• 전기의세계
• /
• 제16권1호
• /
• pp.7-13
• /
• 1967

There are many kinds of motors operating by rated voltage which is constant. In this paper, the characteristics of separately excited direct current motor is analyzed when its terminal voltage is varied as its load current. As for this source, direct current generator of a series field is used, and it is driven at constant speed by a primemover. The induced voltage of the generator is propotional to its load current but it saturates as its load current is large. The charateristics of motor is studied by analog computer because of the nonlinearity of generator. The results are as follows: (1) The load current and the rotor speed of motor increase as the load of motor increases. But the speed of rotor decreases for the influence of the saturation of the iron of generator field when its load current is large. (2) Decreasing the inertia of motor and increasing the inductance of the armature circuit improve the stability of motor and the region of stable state. (3) By changing the field current of the motor, the speed and the direction of rotor can be controlled in wide range.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.488-492
• /
• 2004

In this paper, the design of a speed sensorless vector control system for induction motor is performed by using a new sliding mode technique based on current model flux observer. A current and flux observer based on the current estimation error is constructed. The proposed current observer includes a sliding mode function, which is derivative of the flux. That is, sliding mode observer which allows the estimation of both the rotor speed and flux based on the measurement of motor terminal quantities, would be proposed. And, a synergetic speed controller using the estimated speed signal is designed to stabilize the speed loop. Simulation results are presented to confirm the theoretical analysis, and to show the system performance with different observer gains and the influence of the motor parameter.