• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.658-665
• /
• 2014

The neural stimulators have been employed to the visual prostheses system based on the functional electrical stimulation (FES). Due to the size limitation of the implantable device, the smaller area of the unit current driver pixel is highly desired for higher resolution current stimulation system. This paper presents a 16-channel compact current-mode neural stimulator IC with digital to analog converter (DAC) sharing scheme for artificial retinal prostheses. The individual pixel circuits in the stimulator IC share a single 6 bit DAC using the sample-and-hold scheme. The DAC sharing scheme enables the simultaneous stimulation on multiple active pixels with a single DAC while maintaining small size and low power. The layout size of the stimulator circuit with the DAC sharing scheme is reduced to be 51.98 %, compared to the conventional scheme. The stimulator IC is designed using standard $0.18{\mu}m$ 1P6M process. The chip size except the I/O cells is $437{\mu}m{\times}501{\mu}m$.

• The Journal of Korean Physical Therapy
• /
• v.32 no.3
• /
• pp.168-175
• /
• 2020

Purpose: This study aimed to investigate and report the current status of physical therapy (PT) performed in Korean neonatal intensive care units (NICU) to present foundational data that promotes the advances in neonatal PT in Korea. Methods: Based on the Health Insurance Review and Assessment (HIRA) data, we administered a questionnaire survey to 74 hospitals (39 tertiary and 35 general hospitals) in Korea equipped with a NICU and pediatric PT unit. We developed a 32-item questionnaire with reference to previous Korean studies. The questionnaires were distributed and retrieved via regular mail and an online system. Results: Of the 74 hospitals, 58 (78%) practiced neonatal PT and the duration of each session significantly differed according to the hospital rating. PT was given, depending on clinical symptoms, to infants who were preterm and low birth-weight (96.5%), had brain and spinal cord diseases (84.5%), had pathological tonus (94.8%), with respiratory problems (65.5%), for range of motion exercises (82.8%), for neurodevelopment approaches (72.4%), and for positioning (70.7%). Interdisciplinary meetings were held to share clinical decisionmaking in 17.2% of the hospitals surveyed and parent-participating education to ensure a family-centered approach was offered in 63.8% of the hospitals. The barriers of neonatal PT included low insurance fees, insufficient awareness of colleagues, and the severity of the patient. Conclusion: This study is the first report of the current status of neonatal PT in Korea. The findings of this study will serve as foundational data to review the current neonatal PT practice and promote further advances.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.47-58
• /
• 2008

Charts can propagate information more effectively by visualizing various types of information. Due to this reason, many web developers often use charts when they display information on the web. However, using a chart requires a special dedicated software to install and it is difficult to share the finished charts since they are usually in raster format. The raster format images are fixed in size, therefore, experience image distortion problem when their sizes are changed. In this paper, we propose a web-based chart generating system using CML(Chart Markup Language) to solve the current compatibility and sharing problems. The proposed chart generating system first analyzes XML, Text, or HTML documents to extract chart information in the documents, and then it converts collected chart information to CML. The converted CML documents are displayed on the web browser using a vector method. The vector method has an advantage of protecting its images from distortion even when image sizes are scaled. The CML, proposed in this paper, is a chart markup language based on XML for modeling charts Information. If CML is used for presenting a chart in a web, it makes easier to share and to convert the chart information.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.31-39
• /
• 2015

This paper examines trends of the income inequality index and the income quintile share ratios, using the Household Survey released by Statistics Korea. We discuss their respective effects on total income inequality and the income disparity, as a contribution concept defined in this paper for 1990-2014 periods. Main findings are as follows. First, the contribution of 2-person families to total inequality with the current income or the disposable income becomes bigger, and growth rates have been above 10% since 2003. Second, the contribution of 1-person families to income inequality is greater than that of 2-person families. Policy implication is such that the government had better investigate the 1 or 2 person families in-depth to set up the policy measures for weakening the income inequality.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.67-73
• /
• 2012

A distributed conference architecture with a new load control method has been suggested in this paper. A new event package in this paper enables to control conference load. Some additional elements for exchanging SIP messages between server and participants, and for distributing the load, have been added to new conference information data format. Furthermore to lessen the load, all conference servers share the processing of conference information data which should be transferred periodically to all participants. The suggested load control event package makes each server can get current load status of the overall servers. When load increases in one server SIP client requests are distributed by selecting a server which has the lowest load value, or new server is created to share the load. The performance of the proposed system has been evaluated by experiments. They shows 21.6% increase in average delay time, and 29.2% increase in average SIP message processing time.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.189-200
• /
• 2012

Many companies have endeavored to build a quality cost management system in order to be more productive business organization. This study shows the detail procedures of constructing a quality cost management system which is believed to be appropriate for their business system. That is, the method to calculate the quality cost and the linking logic between the quality improvement and its financial impact are explained based on a particular industry case. In this sense, the changes of business performance measures such as market share, customer satisfaction, etc. were analyzed in the longitudinal perspective for the consecutive 4 years (2003~2006). As the quantitative results of this study, the improvement activities based on the quality cost management system resulted in the 32% reduction of quality cost and the 121% increase of business profit, compared 2005 with 2006. In the qualitative perspective, the successive practice of quality cost reduction and the job information sharing in business unit were obtained by providing the best practices and bench-marking cases. Finally, the customer satisfaction has increased so that the customer-friendly management system has been accomplished. With these efforts, the 3.4% increase of the market share and the 3% increase of the customer satisfaction were obtained in 2005. As the future study, the current study can be extended to the concept of COPQ (cost of poor quality) which focuses on the hidden quality cost of the whole business activities. Such extension of analysis will help us understand the wider role of a quality cost management system in the business.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.539-549
• /
• 2023

Domestic processed food exports might increase due to the free trade agreement (FTA) and spread of the Korean Wave, Hallyu. However, the share of the domestic raw materials in the domestic processed food industry is very low at 31.4%, which limits the spillover effect on domestic agriculture. Therefore, we selected frozen dumplings as a representative processed food whose exports are growing rapidly and conducted a multiple regression analysis to examine the effects of Hallyu and FTA variables on the frozen dumpling exports. We tried to link them to an increase in agricultural income through the expansion of demand for the domestic raw materials. This study analyzed tariff indicator as the FTA variable, cosmetics export value indicator as the Hallyu Wave variable, and other variables expected to change the trade environment such as gross domestic product (GDP) and the relative exchange rate by country as the key explanatory variables that affect changes in the trade environment. The analysis showed that the core hypothesis, the Hallyu variable and the FTA variable, have a positive impact on frozen dumpling exports. Frozen dumpling exports are expected to increase as the FTAs and the spread of Hallyu are expected to continue for the foreseeable future. Therefore, we should seek ways to increase the proportion of domestically produced ingredients in the frozen dumplings to spread the economic impact to domestic agriculture. We reviewed previous studies and determined, the price-related factors play a major role in the use of imported ingredients, and that price stability and competitiveness are essential to increase the share of the domestically produced ingredients. Based on these conclusions, we reviewed the current status of food industry-related policies and determined measures needed to expand the use of domestically produced ingredients.

• Journal of Korea Association of Health Promotion
• /
• v.2 no.3
• /
• pp.47-62
• /
• 2004

Congratulations on the 40th Anniversary of KAHP, which has made great contributions to the control of parasitic diseases in Korea, and to the development of collaboration with China and other Asia countries aiming at the common interest. The 40 years of KAH/KAHP and its predecessor, Korea Association of Parasite Eradication has composed a brilliant road map to bring the prevalence of intestinal parasite infection from 84.3% in 1971 to the current prevalence of 2.4%, and to endeavor in the promotion of the health of children, man and woman, and low income families in Korea, as well as to generously share the successful experience in parasite control with China during the last half century. Indeed, the 40th birth day of KAHP is marked with great achievements and bright future.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.299-307
• /
• 2013

Introduction of PLM in domestic shipyards is being retarded as ship PLM has yet to firm up return of investment and process integration. To implement a ship PLM system, it is required to share ship CAD model data in various design and manufacturing environments. Lightweight CAD models provide a promising solution for sharing CAD models in the product life cycle, which can expedite implementation of ship PLM in domestic shipyards in the near future. Compared to proprietary CAD models, it is easy for lightweight CAD models to be interfaced with various application systems and be connected to manufacturing information. In this paper, the reason why lightweight CAD models are necessary to implement a ship PLM system is addressed and current implementation results are introduced.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.52-58
• /
• 2000

Spot welding, namely a kind of electric resisting welding has been used widely in field of automobile and aircraft industries because of easiness to apply. Specimens used in this study was a mild steel of 1.2mm thickness and the electrode was a Cu-Cr alloy of 6mm diameter. The surface sheared of specimens after testing of tensile shear was observed by SEM(scanning electron microscope) after ultrasonic cleaning for 10min., and microstructures and grain size of all specimens were measured with using of O.M.(Optical microscope). By the means of measurement and observations of tensile shear load, fatigue strength and share surface, the weldability of spot welding was evaluated. When tensile shearing testing, fracture starting point in all specimens was took place at the bond between HAZ(Heat affected zone) and nugget. With increasing in number of layers, fatigue strength was decreased. With increasing in electric current, grain size in the HAZ became more fine.