• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.258-259
• /
• 2012

This paper proposes a new control strategy to eliminate the harmonic components of stator current for stand-alone DFIG system feeding non-linear loads. In this method, the LSC operates as an active filter which is controlled by employing a proportional-integral and a resonant controller. And also, the stator current is used as the feedback signal for the compensator instead of the load current, so that the additional current sensor at the load side can be removed. The experiment is verified to validate the effectiveness of the proposed compensating method.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.107-115
• /
• 2001

Most of rotating machineries supported by contact bearing accompany lowering efficiency, vibration and wear. Moreover, because of vibration, which is occurred in rotating shaft, they have the limits of driving speed and precision. The rotor system has parametric variations or external disturbances such as mass unbalance variations in long operation. Therefore, it is necessary to research about magnetic bearing, which is able to support the shaft without mechanical contact and to control rotor vibration without being affected by external disturbances or parametric changes. Magnetic bearing system in the paper is composed of position sensor, digital controller, actuating amplifier and electromagnet. This paper applied the robust control method using quantitative feedback theory (QFT) to control the magnetic bearing. It also proposed design skill of optimal controller, in case the system has structured uncertainty, unstructured uncertainty and disturbance. Reduction of vibration is verified at critical rotating speed even external disturbance exists. Unbalance response, a serious problem in rotating machinery, is improved by magnetic bearing using QFT algorithm.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.279-288
• /
• 2007

Attempts to achieve a higher productivity have led studies to focus on process improvement. Information has been found as an essential element for process improvement. This research has introduced and focused on two types of information, namely: related jobsite information along the process and feedback information. Related jobsite information along the process which needs to be processed and delivered in a timely manner, accurate, and real time is required to streamline the decision making process. Whereas feedback information about process' current practices which have to be captured and stored is a useful for continuous improvement in identifying the problem origin and determining corrective action. In the current practices, although these two types of information are essential for process improvement, construction process has faced barriers in obtaining that information. Therefore, this research will propose a new information system to overcome the aforementioned barriers. The new information system consists of RFID as an automatic identification and data collection device integrated with database to support construction processes. The new system attempts to provide related jobsite information along the process and feedback information to support decision making process and continuous process improvement respectively. A case study of prefabrication installation process in housing projects has been selected to be implemented in conceptual model of RFID application in construction industry. Conceptual model will be presented in this paper as an initial stage of this ongoing research. Expected outcomes of the new system and future works will be discussed briefly.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.161-165
• /
• 2023

This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

• 전기전자학회논문지
• /
• 제27권3호
• /
• pp.258-264
• /
• 2023

본 논문에서는 부하전류에 따라 LDO(Low Drop Out) 레귤레이터의 효과적인 동작과 파괴 방지를 위해 ESD(Electro Static Discharge) 보호회로를 내장한 LDO 레귤레이터를 제안한다. 제안하는 LDO 레귤레이터는 additional feedback current 회로구조를 이용하여 LDO 레귤레이터의 출력전압에 따라 더욱 효과적으로 패스 트랜지스터의 게이트 노드 전압을 조절할 수 있다. 또한 기존의 ESD 보호소자에 P+ bridge를 추가하여 SCR 루프 상의 전류 이득을 감소시켜 홀딩 전압을 약 2V 가량 높인 새로운 구조를 내장하여 ESD 상황에 대해 높은 신뢰성을 가질 것으로 예상된다.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.143-149
• /
• 2013

This paper presents a new miniature haptic display to convey ample haptic information to a user of a handheld interface. There are buttons on interfaces or general electronic devices, but existing buttons provide haptic feedback of only one passive pattern to a user. Because humans perceive tactile and kinesthetic information simultaneously when they handle objects the proposed actuator provides both sensations at once. It is able to generate various levels of kinesthetic sensations when pressing a button under diverse situations. Also, vibrotactile feedback can be delivered for exciting haptic effects with numerous patterns. Its performance was evaluated in accordance with the resistive force by changing the intensity of the input current. Experiments show that the proposed actuator has the ability to provide numerous haptic sensations for more realistic and complex haptic experiences.

• 정보교육학회논문지
• /
• 제8권3호
• /
• pp.307-317
• /
• 2004

웹 기반 교육 환경에서 학습자 특성에 따른 개별 적응적인 피드백 제공의 필요성에도 불구하고 학습자 특성의 변인 도출의 어려움과 이를 위한 체계적인 전략과 실천 도구 개발이 미흡한 실정이다. 본 연구에서는 웹 기반 교수 학습 환경에서 중요시되고 있는 학습자 특성 변인 중에서 학습자의 학습 패턴을 Apriori 알고리즘을 이용하여 분석하고, 유사한 학습 패턴을 갖는 학습자들로 그룹화 하였다. 이를 기반으로 학습자 개인에게 학습 콘텐츠, 학습 경로, 학습 상황 등을 제공하기 위한 e-SRM 피드백 시스템을 설계하고 개발하였다. 개발된 시스템은 학습자 특성에 맞는 최적의 학습 환경을 제공해 줄 수 있는 기반을 조성할 수 있을 것으로 기대된다.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.472-476
• /
• 2020

We have investigated the impact of optical filter bandwidth on the performance of all-optical automatic gain-controlled (AGC) erbium-doped fiber amplifiers (EDFAs). In principle, an optical bandpass filter (OBPF) should be placed within the feedback gain-clamping loop to set the lasing wavelength as well as the passband of the feedback amplified spontaneous emission (ASE) in all-optical AGC EDFA. From our measurement results, we found that the power level of feedback ASE with 0.1 nm passband of the optical filter was smaller than the ones with >0.2 nm passband cases. Therefore, the peak-to-peak power variation of the surviving channel with 0.1 nm passband was much larger than the ones with >0.2 nm passband. In addition, no significant difference in the power level of the feedback ASE was observed when the passband of the optical filter was ranging from 0.2 nm to 4.5 nm in our measurements. From these results, we have concluded that the passband of the optical filter should be slightly larger than 0.2 nm by taking into account the effect of feedback ASE power and the efficient use of the EDFA gain spectrum for the lasing ASE peak.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.673-676
• /
• 2015

디지털 전치 왜곡기법은 비선형 전력증폭기의 역함수에 해당하는 디지털 전치왜곡 특성을 찾아 송신신호를 미리 왜곡 시켜줌으로써 비선형 전력증폭기를 선형화시키는 기술이다. 일반적으로 전력증폭기는 시간과 전력 그리고 온도에 따라 비선형 특성이 변하기 때문에 디지털 전치왜곡기법에서는 송신신호와 되먹임 신호를 주기적으로 메모리(RAM)에 저장하여 전력증폭기 특성 함수의 역함수인 전치 왜곡 계수를 찾게 된다. 하지만 적응형 알고리즘이 원하는 전치왜곡 계수에 수렴하기 위해서는 긴 샘플이 요구되는데 이는 많은 메모리를 요구한다. 본 논문에서는 전치왜곡 엔진부에서 짧은 길이의 메모리를 사용하지만 이 메모리의 샘플을 재활용하여 반복 연산 수행을 통해 긴 용량의 메모리를 이용하여 구현하였을 경우와 유사한 성능을 얻는 방법을 제안하며 이를 컴퓨터 모의실험을 통해 성능 비교 분석한다.

• 전기의세계
• /
• 제26권3호
• /
• pp.63-68
• /
• 1977

In this paper, the theory of pulse frequency modulated DC/DC power converter to obtain constant output voltage for all input voltage changes is discussed. The switch controller consisting of integrator and comparator determines the ON time of power switch-Thyristor-by the error between the load voltage and a load reference voltage. Resulting voltage and current waveforms have been studied theoretically in detail and verified experimentally for a resistive and inductive load condition. State equations for voltages and currents using binary logic variables are computed by digital computer. Comparison of these withe oscillograms obtained from an experimental model shows very close agreement.