• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.77-85
• /
• 2018

In order to understand the influence of light artifact discoloration, priority must be given to the reaction characteristics of the light the materials constituting the product. In this study, we focus on two representative medium, animal glue and linseed oil which constitute the colored layer of the painting relics. This study is based on an accelerated degradation test using two types of light emitting diods (LEDs) with different wavelength characteristics. In the experiments, discoloration appeared markedly in the animal glue and linseed oil under accelerated aging test conditions using Blue LED. Among the two types of LEDs, the degree of discoloration of the material was much higher with the Blue LED having the total radiation flux (mW). This indicates that the discoloration of painting artifacts such as animal glue and linseed oil is more significantly influenced by the total radiation flux (mW) of the light source than the total luminous flux (lm).

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.58-73
• /
• 2014

In general, it is thought discoloration on wood is frequently found in decorative wood products. So this study was conducted focusing on white rot found lower parts of columns and baseboards of a wooden house, Hyunchungsa (shrine) to know whether microorganisms have any influence on discoloration or there is correlation with strength by investigating resistograph, occurrence of microorganisms and microscopy for analysis(SEM, tissue analysis etc.). The results obtained were as follows: (1) The result of measurement of resistograph showed there are little correlation between discoloration and strength though there was a spot indicating low resistance. (2) The moisture content of discolored part was relatively higher than that of normal parts, but occurrence of microorganisms was less in discolored parts while more kinds of microorganisms were identified in normal parts with high CFU(Colony Forming Unit). (3) The result of SEM (with a magnification of 500 times) on the surface of discolored parts, it was found out there are many kinds of particles in different sizes on the surface and those were composed of elements such as C, O, Si, Ca, and a small amount of Na and Cl (weight %) were detected in part. (4) The result of tissue analysis showed discoloration occurs limitedly to the outer surface of column. As these results, it is concluded that discoloration has nothing to do with strength, damage by microorganisms and salt.

• Journal of Conservation Science
• /
• v.36 no.4
• /
• pp.236-243
• /
• 2020

In this study, an accelerated aging experiment for fabric and paper was conducted using two light emitting diode(LED) sources with different wavelength characteristics, and the discoloration under each lighting type was examined. Hanji(Korean traditional paper) and related textiles showed more discoloration under blue LEDs, while the blue wool standard showed more discoloration under white LEDs. This, indicated that the deterioration varied depending on the sample color. The the effect of the light source on artifact deterioration was primarily related to the total radiation flux(expressed in mill watts), rather than the total luminous flux(expressed in lumens). In addition, the discoloration of the investigated artifacts was dependent on the color rendering of the lighting.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.69-76
• /
• 2018

Lead-based pigments (Lead White, Massicot, and Red Lead) are known to cause discoloration easily in indoor air environments. This study was conducted to investigate the effect of representative indoor air environment factors ($O_2$, $CO_2$) on lead-based pigments. As a result of the experiment, almost all of the specimens showed changes of more than ${\Delta}E=5.0$ in their values of chromaticity under $O_2$ (99%, RH 99%) and $CO_2$ (36,000 ppm, RH 99%) environments. Scanning electron microscopy also showed that the pigment particles lose sharpness of the edge. Furthermore, under the degradation, the intensities of the characteristic peaks in the X-ray diffraction patterns were decreased, and Lead White, Massicot, and Red Lead exposed to $CO_2$ (36,000 ppm, RH 99%) were shown to include the new material cerussite ($PbCO_3$). In particular, Plattnerite ($PbO_2$) was identified on Massicot, and for white lead, the characteristic peaks disappeared and those of Cerussite were identified. It was confirmed that chemical change with discoloration can occur when these lead-based pigments are exposed to a high-humidity $CO_2$ environment.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.211-225
• /
• 2018

The Stupa of the State Preceptor Jigwang from the Beopcheonsaji temple site in Wonju (National Treasure No. 101) was built in the Goryeo Period (around the 11th century), with very excellent style and techniques. It was returned to the Korea after being taken to Osaka of Japan without notice in 1912, and was severely damaged during the Korean War. Subsequently, the Stupa was restored using restoration materials like mortar, and relocated to the National Palace Museum of Korea. Surface contaminants in the Stupa primarily existed around the restoration materials. Black discoloration, which indicates a high discoloration grade, signified a high possession rate in the north and inner regions of the Stupa, which may be related to the relative moisture maintenance time. Most surface contaminants were calcite and gypsum; the black discoloration area underwent secondary discoloration due to air pollution. Moreover, the stone properties exhibited a relatively low discoloration grade, exhibiting crystallized contaminants that partly covered the rock-forming minerals. Overall, the Stupa deteriorated due to discoloration and being covered by lime materials, which were dissolved as the mortar degraded. Hence, it required contaminants removal, surface cleaning and desalination during conservation treatment, in order to control the rate of physicochemical deterioration by contaminants.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.421-431
• /
• 2018

Analyses of the three-storied stone pagoda at the Bulguksa temple in Gyeongju were carried out in order to identify the cause for material characteristics of inorganic contaminants and conservation treatment materials. Results indicated that foreign soil or weathering soil caused yellow discoloration of the pagoda, reddish-brown contaminants were formed by goethite (FeOOH), an iron oxide mineral, and black pollutants were formed by manganese (Mn) oxide, leading to discoloration of the rock. Among the restoration materials used in the past, cement mortar could cause whitening by reacting with the external environment. The results were used as basic standards to evaluate the material characteristics of the surface contaminants and identify a set of effective conservation treatments. Nevertheless, continuous monitoring is required, as there is a high possibility of regeneration of pollutants in the future because of the continuous exposure of the pagoda to the external environment.

• 보존과학연구
• /
• s.33
• /
• pp.57-67
• /
• 2012

The Uiseong Tapriri Five-Storied stone pagoda has occurred exfoliation, granular disintegration and discoloration by physical and chemical weathering factors with the major deterioration occurring due to efflorescence by salt. According to the results of SEM-EDS and X-ray diffraction analysis, salts consists of gypsum, taranakite. Artificial salt weathering tests were carried out using the same type of rocks as those in the stone pagoda. The test results showed that efflorescence occurred on the surface of the rock, and that exfoliation and granular disintegration occurred inside the rock due to salt crystallization.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.329-341
• /
• 2012

Magai Wareiishi Jizo (Buddhist statue carved on rock surface) is close to shoreline and a part of rock block is periodically immersed by seawater. Rock material of the Wareiishi-jizo statue is composed mainly of medium or coarse-grained biotite granite and very durable. However, physical properties of the rock have been changed according to the complex interactions of the salt solution and surrounding environment. Exfoliation of the rock surface is a serious condition by salt crystallization. Exfoliation (14.6%) is concentrated on the upper part of the rock block with mainly boundary of seawater as the center. On the other hand, lower part of the rock block show black layers by contaminants deposition. In addition, brown discoloration and biological contaminants is overlapped. Rock surface show high discoloration rate of 50.5% (black discoloration, 29.2% > yellow discoloration, 14.1% > brown discoloration, 4.4% > green discoloration, 2.9%). Upper part of the rock block had a lot of change in the physical properties than lower part that is immersed by seawater. In particular, surface properties of the rock block was very weak state at the boundary surface of seawater permeation.

• Conservation Science in Museum
• /
• v.26
• /
• pp.1-12
• /
• 2021

The bisphenol A epoxy resin currently used for the conservation of stone cultural heritage items is known to suffer from yellowing discoloration. In order to mitigate this yellowing and explore the availability of more diverse materials for the conservation of stone cultural heritage items, a hydrogenated Bisphenol A-based epoxy resin was prepared and compared with the epoxy resin currently used in the conservation treatment of stone cultural heritage items. The newly prepared epoxy resin showed improved physical properties relative to the existing materials, especially in terms of tensile strength, adhesion, and machinability, while the yellowing discoloration was reduced by a factor of roughly five to eight. The results suggest that epoxy resin could be used as a stable material for the conservation treatment of stone cultural heritage items, most of which are located outdoors.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.589-599
• /
• 2016

Korean wooden cultural heritages are treated by flame retardants to protect fire hazards. Two types of flame retardants are used to treat wooden cultural heritage. These flame retardants cause some problems such as surface whitening, discoloration, and cracks due to the chemical reaction caused by Korean traditional wood painting (Dancheong), flame retardant and wood humidity. The Korean government is trying to cut down on the amount of flame retardants for the wooden cultural heritage because of these problems. This study was carried out to find the cause of whitening by flame retardants treatment. The reaction between pigment and flame retardant chemicals was analyzed by infrared spectroscopy.