• 한국재료학회지
• /
• 제11권5호
• /
• pp.393-397
• /
• 2001

고온구조용 재료로의 사용이 기대되는 $Al_3$Ti금속간 화합물의 연성 향상을 위한 목적으로 기계적 합금화를 통한 cubic Ll$_2$구조의 생성거동과 Mn의 첨가 영향을 조사하였다. Al-8Mn-25Ti조성에서 20시간의 기계적 합금화를 통해 약 1.0nm 사이즈의 grain을 갖는 nanocrystalline cubic Ll$_2$Al$_3$Ti 금속간 화합물이 제조되었다. Mn이 첨가된 3원계 cubic Ll$_2$Al$_3$Ti 금속간 화합물은 2원계 cubic Ll$_2$Al$_3$Ti 금속간 화합물에서 보이는 Ll$_2$구조에서 D0$_{23}$구조나 D0$_{22}$구조로의 상변태가 발생하지 않았으며 Mn의 첨가로 인해 Ll$_2$구조는 120$0^{\circ}C$가지 안정함을 보였다.

• Applied Microscopy
• /
• 제32권1호
• /
• pp.31-37
• /
• 2002

[ $Mg_{68}Zn_{28}Y_4$ ] 합금의 응고 조직은 primary solidification phase, primary solidification phase로부터 성장된 ${\alpha}-Mg$ dendrite, 그리고 응고 말기에 형성된 eutectic structure의 세 가지형태 조직으로 구성되어져 있다. Primary solidification phase에는 매우 큰 정도의 phason strain이 존재하고 있으며, $a=27.2{\AA}\;and\;{\alpha}=63.43^{\circ}$의 격자상수를 갖는 1/1 rhombohedral approximant가 존재한다. 이와 같은 rhombohedral approximant의 구조는 six dimensional face centered hyper-cubic lattice에 phason strain을 도입함에 의해 얻어질 수 있다. Decagonal phase는 icosahedral phase로부터 방위 관계를 가지며 형성되며, $Mg_4Zn_7$는 decagonal phase로부터 방위관계를 가지며 성장한다. 이는 세 상간에 구조적 유사성이 존재하고 있음을 의미하며, 응고시 용질원자의 분배에 의해 이들 세 상이 순서대로 형성되어진다.

• 한국재료학회지
• /
• 제21권7호
• /
• pp.391-395
• /
• 2011

The structure and dielectric properties of poled <001>-oriented 0.7Pb($Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) crystals have been investigated for orientations both parallel and perpendicular to the [001] poling direction. An electric field induced monoclinic phase was observed for the initial poled sample. The phase remained stable after the field was removed. A quite different temperature dependence of dielectric constant has been observed between heating and cooling due to an irreversible phase transformation. The results of mesh scans and temperature dependence of the dielectric constant demonstrate that the initial monoclinic phase changes to a single domain tetragonal phase at 370K and to a paraelectric cubic phase at 405K upon heating. However, upon subsequent cooling from the unpoled state, the cubic phase changes to a poly domain tetragonal phase and to a rhombohedral phase. In the ferroelectric tetragonal phase with a single domain state, the dielectric constant measured perpendicular to the poling direction was dramatically higher than that of the parallel direction. A large dielectric constant implies easier polarization rotation away from the polar axis. This enhancement is believed to be related to dielectric softening close to the morphotropic phase boundary and at the phase transition temperature.

• 한국전자파학회논문지
• /
• 제29권2호
• /
• pp.109-117
• /
• 2018

비선형적으로 회전하는 표적의 inverse synthetic aperture radar(ISAR) 영상을 형성하기 위해서는 표적의 수신 신호에 적절한 회전운동 보상기법을 수행해 주어야 한다. 대표적인 회전운동 보상기법인 prominent point processing(PPP)은 산란점의 위상정보를 이용하여 비선형 회전성분을 선형화하는 기법이다. 본 논문에서는 integrated cubic phase function(ICPF)을 이용하여 산란점의 위상정보를 추정한 다음 PPP를 수행하여 ISAR 영상을 형성하는 방법을 제안한다. ICPF는 다수의 산란점으로부터 중첩된 신호가 수신되었을 때 1차원 영역(domain)의 최댓값을 찾는 작업을 수행함으로써 산란점의 위상정보를 추정할 수 있다. 시뮬레이션 결과 ICPF를 이용한 산란점 위상정보 추정 후 PPP를 수행함으로써 지배적 산란점이 존재하지 않는 환경에서 실시간으로 높은 품질의 ISAR 영상을 획득하였다.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.187-190
• /
• 1997

The aluminum-magnesium (Al-Mg) aklloys have been proved to be an effective solvent for synthesis of cubic-phase boron nitride (cBN) from hexagonal-phase boron nitride (hBN) at the conditions of high pressures and high temperatures (HP/HT). Various kinds of hBN powders having different crystallinity have been tested for cBN synthesis with Al-Mg solvents. The conversion ratio from hBN to cBN and the shape of synthesized cBN crystals appeared to be affected strongly by chemical composition and added amount of Al-Mg solvents as well as crystallinity of BN powders. As the magnesium content increased in the Al-Mg solvents, the conversion ratio increased and the size of cBN crystals became larger. The crystal facets developed well in the specimens with solvents having high Mg content. It was observed that a hBNlongrightarrowcBN transformation occurred more easily in the specimens having well crystallized hBN powders. Amorphous BN having much $B_2O_3$ impurity exhibited a low threshold temperature for transformation to cBN, which was attributed to crystallization of amorphous BN to well crystallized hBN prior to transformation into cBN with help of $B_2O_3$.

• 한국결정학회지
• /
• 제6권1호
• /
• pp.49-55
• /
• 1995

HVPE(Halide Vapour Phase Epitaxy) 법에 의하여 육방정계 질화갈륨(GaN) 단결정막의 (0001)면에 섬모양으로 배향된 입방정계 β-GaN상과 육방정계 α-GaN상 사이의 상호 배향은 [110](111) β-GaN//[1120](001) α-GaN 관계를 갖는 것으로 관찰되었다. 삼각섬 모양을 β-GaN는 막표면에 평행인 (111)면에 대한 쌍정위치를 점하고 있었다. 광발광(PL) 및 국소부위 음극선 발광(CL)을 측정하여 β-GaN의 금제대폭값은 실온에서 3.18±0.30eV로 얻어졌다.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.391-398
• /
• 1996

PMN계에서 유전적 성질에 관한 연구들은 광범위하게 이루어져 왔으나 전계인가 변위특성에 관한 폭넓은 연구는 매우 드물다. 본 연구에서는 완화형 강유전체의 가장 대표적인 PMN계에서 PT의 함량 및 측정 온도의 변화에 따른 유전적 성질 및 전계인가 변위특성을 광범위하게 조사하는 것을 목표로 하고 있다. 전형적인 columbite precur-sor법에 의해 분말을 준비하고 고상소결방법에 의하여 모든 시편을 제조하였다. PT의 함량이 증가하면서 직선적으로 (T$\varepsilon$max)가 증가하였으며 유전율은 13000~22000 사이의 값을 보였다. 유전율의 온도 의존성은 PMN의 경우 전형적인 완화형 강유전체의 유전 특성을 보이지만 PT의 함량이 증가될수록 보통 강유전체의 sharp한 거동을 보였다. 전계인가 변위특성에서는 단순히 유전율이 최대가 되는 온도에서 발생 strain이 최대가 되는 것은 아니며 tetragonal-cubic의 phase transition에서는 strain의 증가가 없고 rhombohedral에서 tetragonal 혹은 rhombohed-ral에서 cubic으로의 상전이에서만 strain이 크게 나타남을 알 수 있었다.

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.389-392
• /
• 1998

We have investigated the crystal properties of the Cd0.96Zn0.04Te(CZT) films evaporated on the Si(100) substrates by Elecctron Beam Evaporator(EBE) techique. The compositions of the As-preared films were different about 4% of atomic ratio, The films stucture was observad to be polycrystalline in cubic phase. Diffraction peaks were notable at the substrate temperature of $300^{\circ}C$. The reflectance measurements yield $E_1$=3.25~3.29 eV $E_1$+${\Delta}_1$=3.76~3.83 eV and $E_2$=5.08 eV,showing that the films wear in cubic phase. For the film evaporated at the substrate temperature of $150^{\circ}C$, the peaks of photocurrent are at 720nm and 980nm.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.38-42
• /
• 2017

Vanadium nitride (VN) coatings were deposited using inductively coupled plasma (ICP) assisted sputtering at different ICP powers. Microstructural, crystallographic and mechanical characterizations were performed by FE-SEM, AFM, XRD and nanoindentation. The results show that ICP has significant effects on coating's microstructure, structural and mechanical properties of VN coatings. With an increase in ICP power, coating microstructure evolved from a porous columnar structure to a highly dense one. Single- phase cubic (FCC) VN coatings with different preferential orientations and residual stresses were obtained as a function of ICP power. Average crystal grain sizes of single phase cubic (FCC) VN coatings were decreased from 10.1 nm to 4.0 nm with an increase in ICP power. The maximum hardness of 28.2 GPa was obtained for the coatings deposited at ICP power of 200 W. The smoothest surface morphology with Ra roughness of 1.7 nm was obtained in the VN coating sputtered at ICP power of 200 W.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1249-1256
• /
• 1997

Single phase La1-xSrxCoO3 (x≤0.2) was synthesized as a uniform sized 100 nm particulates with relatively high surface area of 20-30 m2/g, at low temperature (≥600 ℃), from a polymeric gel precursors prepared by using poly(vinyl alcohol) as homogenizer. No minor phase developed during the crystallization when polymer/metal mole ratio was higher than 3. As the polymer/metal mole ratio was raised in the gel, the amount of carbonaceous residues in the amorphous solid precursor prepared by heating the gel at 300 ℃ increased. Most of the residues were eliminated by exothermic thermal decomposition around 400 ℃. The amount of residual carbon (less than 1%) left in the crystalline La1-xSrxCoO3 decreased as more polymer was used, eliminating detrimental effect which might be posed by using large amount of organic homogenizer. The crystal structure of La1-xSrxCoO3 synthesized at temperature lower than 800 ℃ was observed to be shifted from rhombohedral to more symmetric cubic. The structure shifted back to rhombohedral as the cubic sample was annealed at 1000 ℃.