• Current Applied Physics
• /
• 제18권11호
• /
• pp.1235-1239
• /
• 2018

We present a novel process to fabricate three-dimensional (3D) metallic patterns from 3D printed polymeric structures utilizing different hygroscopic swelling behavior of two different polymeric materials. 3D patterns are printed with two different polymers as cube shape. The surface of the 3D printed polymeric structures is plated with nickel by an electroless plating method. The nickel patterns on the surface of the 3D printed cube shape structure are formed by removing sacrificial layers using the difference in the rate of hygroscopic swelling between two printing polymer materials. The hygroscopic behavior on the interfaced structure was modeled with COMSOL Multiphysics. The surface and electrical properties of the fabricated three-dimensional patterns were analyzed and characterized.

• Wind and Structures
• /
• 제2권4호
• /
• pp.305-323
• /
• 1999

Accurate turbulence modeling is an essential prerequisite for the use of Computational Fluid Dynamics (CFD) in Wind Engineering. At present the most popular turbulence model for general engineering flow problems is the ${\kappa}-{\varepsilon}$ model. Models such as this are based on the isotropic eddy viscosity concept and have well documented shortcomings (Murakami et al. 1993) for flows encountered in Wind Engineering. This paper presents an objective assessment of several available alternative models. The CFD results for the flow around a full-scale (6 m) three-dimensional surface mounted cube in an atmospheric boundary layer are compared with recently obtained data. Cube orientations normal and skewed at $45^{\circ}$ to the incident wind have been analysed at Reynolds at Reynolds number of greater than $10^6$. In addition to turbulence modeling other aspects of the CFD procedure are analysed and their effects are discussed.

• Wind and Structures
• /
• 제8권1호
• /
• pp.49-60
• /
• 2005

A tornado changes its wind speed and direction rapidly; therefore, it is difficult to study the effects of a tornado on buildings in a wind tunnel. The status of the tornado-structure interaction and various models of the tornado wind field found in literature are surveyed. Three dimensional computer modeling work using the turbulence model based on large eddy simulation is presented. The effect of a tornado on a cubic building is considered for this study. The Navier-Stokes (NS) equations are approximated by finite difference method, and solved by an semi-implicit procedure. The force coefficients are plotted in time to study the effect of the Rankine combined vortex model. The tornado is made to translate at a $0^{\circ}$ and $45^{\circ}$ angle, and the grid resolution is refined. Some flow visualizations are also reported to understand the flow behavior around the cube.

• 아동학회지
• /
• 제22권2호
• /
• pp.315-327
• /
• 2001

This study investigated young children's spatial representation of geometrical relations based on their drawings of cube buildings. One hundred seventy-six children from 3 to 6 years of ages were selected from private kindergartens and day care centers. Their drawings were classified into 6 developmental levels: level 1 - drawings show only scribbles or several circles; level 2 - drawings show plane squares from a front view; level 3 - positional relations are included in the drawings; level 4 - separate-joint relations or the general outline of a cube building are shown; level 5 - rotated drawing and an additional square for hidden faces are attempted to represent the lateral view; level 6 - parallel lines are drawn to represent 3-dimensional structures. Three-to four-year-olds were between levels 1 and 2; four-to six-year olds were between levels 3 and 4; and children over six years old were between levels 3 and 5.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.94-100
• /
• 2017

본 논문에서는 425 MHz에서 동작하는 저궤도 큐브위성 탑재용 메타물질형 안테나를 연구하였다. 원거리 무선통신 네트워킹의 중요성과 위성의 역할이 대두되고, 큐브위성과 같은 자신만의 위성을 저가로 개발 보유를 희망하는 대학교나 개인들이 늘어감에 따라, 구조의 소형화 기술이 필요하다. 위성의 외부 공간을 많이 차지하는 것이 안테나 크기이므로, 경량화 목적으로 탑재용 소형 안테나의 설계하였다. 제안된 메타물질형 저자세 안테나의 경우 일반 패치안테나와 달리 0차 공진을 만들어 냄으로서, 전방향성 방사패턴을 만들어낸다. 또한, 제안된 안테나의 위성내부의 시스템 결합에 따른 전기적 특성변화를 확인하기 위해, 급전부를 대표하는 UHF 도파관 대역통과 여파기와 연결하여 성능을 검증하였다. 모노폴과 메타물질형 저자세 안테나의 성능이 서로 비교된다.

• Wind and Structures
• /
• 제37권4호
• /
• pp.255-274
• /
• 2023

The aim of this paper is to enhance the accuracy of predicting time-averaged external surface pressures on low-rise buildings by utilizing Computational Fluid Dynamics (CFD) simulations. To achieve this, benchmark studies of the Silsoe cube and the Texas Tech University (TTU) experimental building are employed for comparison with simulation results. The paper is structured into three main sections. In the initial part, an appropriate domain size is selected based on the precision of mean pressure coefficients on the windward face of the cube, utilizing Reynolds Averaged Navier-Stokes (RANS) turbulence models. Subsequently, recommendations regarding the optimal computational domain size for an isolated building are provided based on revised findings. Moving on to the second part, the Silsoe cube model is examined within a horizontally homogeneous computational domain using more accurate turbulence models, such as Large Eddy Simulation (LES) and hybrid RANS-LES models. For computational efficiency, transient simulation settings are employed, building upon previous studies by the authors at the Windstorm Impact, Science, and Engineering (WISE) Lab, Louisiana State University (LSU). An optimal meshing strategy is determined for LES based on a grid convergence study. Three hybrid RANS-LES cases are investigated to achieve desired enhancements in the distribution of mean pressure coefficients on the Silsoe cube. In the final part, a 1:10 scale model of the TTU building is studied, incorporating the insights gained from the second part. The generated flow characteristics, including vertical profiles of mean velocity, turbulence intensity, and velocity spectra (small and large eddies), exhibit good agreement with full-scale (TTU) measurements. The results indicate promising roof pressures achieved through the careful consideration of meshing strategy, time step, domain size, inflow turbulence, near-wall treatment, and turbulence models. Moreover, this paper demonstrates an improvement in mean roof pressures compared to other state-of-the-art studies, thus highlighting the significance of CFD simulations in building aerodynamics.

• 한국광물학회지
• /
• 제23권4호
• /
• pp.367-375
• /
• 2010

지구물질로 이루어진 공극 구조와 이를 채우고 있는 유체의 상호작용에 대한 이해는 지표 및 지구내부의 다양한 지질학적 현상의 설명에 필수적이다. 본 연구에서는 지구물질과 유체의 상호작용을 보다 잘 이해하기 위해, 비표면적과 공극률이 다공성 매질의 공극 구조를 설명하는 매개변수에 미치는 영향을 살펴보고자 하였다. 이를 위해 입자의 지름과 공극률을 다양하게 하여 동일한 크기의 구형의 입자로 이루어진 다공성 매질에 대한 삼차원 공극 구조를 무작위 패킹 시뮬레이션으로 얻었고, 이에 대해 구성 엔트로피와 삼차원 상자집계 프랙탈 차원 분석을 하였다 구성 엔트로피 분석 결과, 엔트로피 길이는 비표면적이 2.4에서 $8.3mm^2/mm^3$으로 증가할 때 0.8에서 0.2 mm로 감소하고, 최대 구성 엔트로피는 공극률이 0.33 에서 0.46으로 증가할수록 0.94에서 0.99로 증가하는 뚜렷한 경향을 보인다. 구성 엔트로피와 공극률의 관계로부터 구성 엔트로피가 맨틀 용융체의 탄성과 점성도를 설명하는 변수로 사용될 수 있음을 제시한다. 삼차원 상자집계 프랙탈 차원은 비표면적이 같을 때 공극률이 증가함에 따라 증가하고, 비표면적이 2.4에서 $8.3mm^2/mm^3$으로 증가할 때 2.65에서 2.98로 증가한다. 이러한 삼차원 상자집계 프랙탈 차원과 비표면적, 공극률의 관계로부터 삼차원 상자집계 프랙탈 차원이 지진파 감쇠와 맨틀용융체를 포함한 다양한 지질매체의 구조와 무질서도를 설명하는 변수로 사용될 수 있음을 제시한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.265-271
• /
• 1997

Marine concrete structures have been exposed to salt from ocean environments. Chloride-penetration into marine concrete structures should accelerate the corrosion of reinforcement steel, which may severely affect the durability of them. Major concerns are to develop durable concrete for high corrosion resistance of reinforcing steel embedded in concrete. The objective of this experimental study is to investigate adequate usage of corrosion inhibitors by evaluating corrosion level in 80 specimen located in the labatory and in the site. 80 specimen of cube 20${\times}$20${\times}$11.5 and 63 specimen of slab 30${\times}$30${\times}$10 are made for this study.

• 한국공간구조학회논문집
• /
• 제22권1호
• /
• pp.17-24
• /
• 2022

Currently, the construction trend of high-rise structures is changing from a cube-shaped box to a free-form. In the case of free-form structures, it is difficult to predict the behavior of the structure because it induces torsional deformation due to inclined columns and the eccentricity of the structure by the horizontal load. For this reason, it is essential to review the stability by considering the design variables at the design stage. In this paper, the position of the weak vertical member was analyzed by analyzing the behavior of the structure according to the change in the core position of the twisted high-rise structures. In the case of the shear wall, the shear force was found to be high in the order of proximity to the center of gravity of each floor of the structure. In the case of the column, the component force was generated by the axial force of the outermost beam, so the bending moment was concentrated on the inner column with no inclination.