• 미생물학회지
• /
• 제14권3호
• /
• pp.117-127
• /
• 1976

A cellulase fraction (F IV-1) purified to about 8-folds was obtained from crude cellulase prepared from the wheat bran culture of S.atra. The partial purification of the enzyme was made by DEAE Sephadex and Sephdex cloumn chromatography in conjuction with ammonium sulfate precipitation. After stading at various pH's for 22 hours at $20^{\circ}C$, F IV-1 was most stable at pH 5.0 but when the enzyme fraction was stood for 74 hours, the point of pH stability was raised to around pH 6.0-7.0. After heating at various temperatures for 1 hour, F IV-1 was most stable at $20^{\circ}C$. The optimal enzyme activities of F IV-1 were seen at pH 6.0 and $50^{\circ}C$. The optimal concentrations of $Zn^{++}\;and\;Ca^{++}$ for the activities of crude cellulase were 6 and 4 mM respectively, but $Ca^{++}$ inhibited the enzyme activity at concentrations below 2 mM and above 6mM. Both $Cu^{++}\;and\;Mn^{++}$ ions inhibited cellulase activities and a ocmplete inactivation of crude cellulase was achieved at concentratioins of 5 and 2 mM of ions respectively. When Na-CMC was used as substrate, the Km values of crude cellulase and F IV-1 were calculated to be $5{\times}10^{-4}\;and\;2{\times}10^{-5}mM$, and V values 32 and 1.35 mmoles/hour, respectively. The Ki values of $Mn^{++}$ for crude cellulase and F IV-1 were found to be $8{\times}10^{-2}\;and\;3{\times}10^{-2}\;mM\;while\;those\;of\;Cu^{++}\;were\;at\;2{\times}10^{-1}\;and\;1{\times}10^{-1}\;mM\;respectively.\;Both\;Mn^{++}\;and\;Cu^{++}$ showed competitive inhibition with substrate.

• 미생물학회지
• /
• 제43권4호
• /
• pp.337-340
• /
• 2007

Pseudomonas syringae pv. syringae는 우리나라에서 참다래 꽃썩음병의 원인세균으로 알려져 있다. 본 연구에서는 우리나라의 서로 다른 참다래 과수원에서 분리되어 동정된 11개 균주의 꽃썩음병균이 가지고 있는 플라스미드 양상을 pulsed-field 젤 전기영동으로 조사하였다. 그 결과 전체 균주들은 가지고 있는 플라스미드의 개수와 크기에 따라 6개 그룹으로 나누어 졌다. 플라스미드의 수는 0에서 4개, 크기는 22 kb에서 160 kb로 다양하였다. 이들 중 두 개의 플라스미드를 가지고 있는 그를 III에 속하는 4균주가 Cu에 대한 저항성을 보였다. Southern blot hybridization 결과 Cu 저항성 유전자는 48 kb 크기의 플라스미드에 들어 있었다.

• 환경생물
• /
• 제17권2호
• /
• pp.183-190
• /
• 1999

The bioleaching of heavy metals from fly ash was performed by Thiobacillus thiooxidans MET isolated from the enrichment culture of an anaerobically digested sludge. The effect of solid concentrations on the efficiency of metal leaching was studied in shaken flasks. In the range of solid concentrations 20 g.L­$^1$to 100 g.L­$^1$T. thiooxidans MET oxidized S$^{0}$ to sulfate without any lag period. The final pH of slurry solution was decreased to below pH 1, and the final oxide-redox potential (ORP) was increased to over 420 mV in the solid concentrations below 100 g.L­$^1$. However, the initial lag period of 4 to 8 days was required to obtain the pH reduction and ORP increase of the slurry solutions in the range of solid concentrations 150 g.L­$^1$to 300 g.L­$^1$. The sulfur oxidation rate of T. thiooxidans MET in 20~100 g.L­$^1$solid concentrations was 0.70~0.75 g-S.L­$^1$ㆍ d­$^1$, but its sulfur oxidation activity was remarkably inhibited with increasing solid concentration over 150 g.L­$^1$. Increasing fly ash solids concentration in the range of solids concentration 20 g.L­$^1$ to 200 g.L­$^1$decreased the removal efficiency of Zn, Cu, Mn, Cr and Pb. The solubilization of heavy metals from fly ash was strongly correlated with the pH value of slurry solution. When the pH of slurry solution was reduced to 3, the solubilization process of Zn, Cu and Mn started, and their solubilization efficiency of Zn, Cu and Mn was progressively increased below pH 2. However, the solubilization process of Cr and Pb started at pH 2.5 and 2.0, respectively.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.479-492
• /
• 2003

Wheat, barley, rye, and maize were grown in field and pot experiments at various non-contaminated soils in order to establish uptake rates for added selenate, and to find baseline concentrations for various soil types. Edible parts (grains) and stalks of the crops were analyzed separately for Se, as well as for Ca, Cu, Fe, Mn, P, S, and Zn. The addition of Na-selenate in admixture with the NPK 20:8:8 fertilizer had no influence on the composition of the other elements investigated. The proportions of added nitrate: selenate, and sulfate:selenate were kept constant. The Se- uptake rate differed among the cereals tested, it was highest for winter wheat. Utilization of added Se in the field ranged from $0,4-4,7\%$, and and in the pots from $3,3-5,4\%$, it was markedly lower in clay soil. Whereas P and Zn were preferably found in the grains, Ca-Fe-Mn-S got enriched in the stalks. For the fields, the location had some influence upon Fe, Mn, and Zn, whereas it was not important for P, S, Cu, and strikingly, Ca. Pot and field experiments on similar soils led to different results, except for P and S. Maize (whole grains) was significantly lower in Ca, Cu, and Mn, and might even cause trace element deficiencies, if exclusively fed. Few correlations between the trace elements investigated led to the conclusion that most element contents were governed by plant metabolism. Variations of mobile Fe in the soils were balanced by uptake into the stalks. The data are compared with data from other presumably non-contaminated sites.

• 대한화장품학회지
• /
• 제40권2호
• /
• pp.203-214
• /
• 2014

시중에 유통 중인 산화형 염모제 28건을 대상으로 접촉성피부염 유발 성분 함량 조사를 수행하여, 관련분야에 기초자료를 제공하고자 본 연구를 수행하였다. 접촉성피부염을 유발하는 물질로 산화염료 10종(p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol)과 중금속 4종(니켈; Ni, 크롬; Cr, 코발트; Co, 구리; Cu)을 선정하였다. 10종의 접촉성피부염 유발 산화염료의 함량조사를 위하여 헥산-2% 아황산나트륨을 이용하여 빠르고 간단하게 시료전처리를 하였고, 초고성능액체크로마토그래피를 이용하여 분석시간이 12 min으로 짧은 동시분석조건을 확립하였다. 분석 결과 10종의 산화염료 성분은 제품에 표기된 성분이 모두 확인되었고, 각 성분의 농도는 의약품등 표준제조규정에 제시된 사용할 수 있는 농도상한 이하로 나타났다(식품의약품안전처 고시 제2013-228호). 또한, 4종의 중금속성분을 확인하기 위하여 microwave를 이용하여 시료를 분해하였고, 유도결합플라즈마분광계를 이용하여 정량 분석하였다. 각 제품에서 중금속별 검출량은 Ni 0.572 ${\mu}g/g$, Cr 3.161 ${\mu}g/g$, Co 2.029 ${\mu}g/g$, Cu 0.420 ${\mu}g/g$이었다. 염모제의 성상별 중금속 농도를 비교한 결과 분말타입(헤나) 염모제의 평균 중금속 농도는 Ni 1.800 ${\mu}g/g$, Cr 10.127 ${\mu}g/g$, Co 7.082 ${\mu}g/g$, Cu 1.451 ${\mu}g/g$로 거품타입이나 크림타입 보다 높았다. 염모제를 흑색, 흑갈색, 갈색, 짙은 갈색, 옅은 갈색, 붉은 갈색의 6개 색상으로 구분하여 분석한 결과, 갈색의 경우 Co 농도가 가장 높고 나머지 색상에서는 모두 Cr의 농도가 높은 것을 알 수 있었다.

• Asian Journal of Atmospheric Environment
• /
• 제8권3호
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• 한국산림과학회지
• /
• 제86권4호
• /
• pp.435-442
• /
• 1997

충남(忠南) 금산군(금산군), 복수면(복수면) 대성탄광(대성탄광) 폐탄광지역(폐탄광지역)에 탄광폐수(炭鑛廢水)에 의해 영향을 받는 하천수(河川水)의 오염실태(汚染實態)를 조사하였다. 하천수(河川水)의 오염정도(오염정도)를 알기 위하여 하천수(河川水)의 pH, Do, 황산(黃酸)이온, 질산(窒酸)이온, 염산(鹽酸)이온의 농도(濃度) 및 무기원소(無機元素)의 농도(濃度) 등을 측정하였다. 폐탄광(廢炭鑛)과 폐광석(廢鑛石) 더미로부터 폐수(廢水)가 유입되는 하천수(河川水)의 pH는 3.46-4.29의 범위로 산성폐수(酸性廢水)를 형성하였으며, 본 조사지역(調査地域)의 수계(水系)에서 하천수(河川水) pH의 변화는 $SO{_4}^{2-}$, Mn, Cu, Zn, Fe 및 $Mg^{2+}$ 농도(濃度)와 고도의 부(負)의 상관(相關)을 나타내었다. 폐수(廢水)가 유입된 하천수(河川水)의 황산(黃酸)이온 농도(濃度)는 236.73 - 310.50mg/l로 청정수와 비교할 때 약 10배 더 높았으며, 오염(汚染) 하천수(河川水)의 Mn과 Fe의 농도(濃度)는 각각 0.56 - 0.83mg/l, 5.89 - 10.58mg/l로 Mn 농도(濃度)는 청정수와 비교할 때 약 20배나 높았다. 오염(汚染) 하천수(河川水)의 $Mg^{2+}$와 $Ca^{2+}$ 농도(濃度)는 청정지역(淸淨地域)과 비교해서 높게 나타났다. 산성광산폐수(酸性鑛山廢水)의 오염지표(汚染指標)(AMDI)는 오염계류(汚染溪流)에서 42-51이었고, 비오염계류(非汚染溪流)에서는 70 - 76으로 오염계류(汚染溪流)에서 낮았다.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.44-52
• /
• 2018

본 연구에서는 동 함유 슬러지로부터 회수된 동 조금속을 황산구리 전해액에서 전해정련 공정 조건을 선택적으로 조절함에 따라 초미세 분말 형태의 동을 회수하고자 하였다. 황산구리 전해액 농도, 인가전류밀도, 첨가제 종류 및 농도에 따라 LSV(Linear Sweep Voltammetry)을 이용하여 초미세 분말 제조가 가능한 인가전류밀도 범위를 설정하여 전해정련 공정을 수행 하였다. 이 때 얻어진 분말에 대해 SEM(Scanning Electron Microscope) 및 PSA(Particle Size Analyzer)를 사용하여 동 분말 형상 및 크기를 분석하였다. 유기첨가제를 사용하지 않은 0.1 ~ 0.4 M 황산구리 전해액 조건에서 동 분말 크기는 인가전류밀도가 한계전류밀도에 가까울수록 감소하였고, 0.2 ~ 0.3 M 황산구리 전해액에서 동 분말 크기가 가장 감소하는 경향을 나타내었다. 또한, 위 실험을 통해 얻은 공정 조건을 바탕으로 유기 첨가제 종류 및 농도를 달리 첨가하여 동 분말 표면 형상 및 크기를 분석하였을 때, Cellulose계 첨가제 2,000 ppm 조건에서 가장 작은 크기(nm급)의 양호한 구형 형태 동 분말을 얻을 수 있었다.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.490-495
• /
• 1994

Acid phosphatase (EC3.1.3.2) from carrots was partially purified by ammonium sulfate fractionation (30%-80%), Sephacryl S-200 gel filtration, cm-Sepharose CL-6B and DEAE -Sephacel ion exchange chromatography. The optimum ph and temperature of acid phosphatase from carrots were pH 5.5 and 55$^{\circ}C$, respectively. The enzyme was most stable at ph 6.0 and relatively unstable below pH 4.0 . The activation energy of the enayme was determined to be 10.6kcal/mole. The enzyme utilized p-nitrophenyl phosphate as a substrate among tested possible substrates, whereas it hydrolyzed 5' -IMP and 5'-GMP poorly. The Michaelis -Menten constant(Km) of the enzyme with p-nitrophenyl phosphate as a substrate was identified as 0.55mM. Amongtested metal ions and inhibitors, Al+++ Zn++, Cu++ , fluoride, metavanadate and molybdate ions inhibited the enzyme activity drastically.

• 아시안잔디학회지
• /
• 제14권1호
• /
• pp.263-272
• /
• 2000

A field study was carried out to find out the effective chemical for controlling algae without visual injury on creeping bentgrass golf greens. The results were as follows. 1. Chlorothalonil(75%), Metalaxy(7.5%)+Mancozeb(56%) and Mancozeb(75%) did not injure creeping bentgrass. Only chlorothalonil(75%) effectively controlled algae regardless of concentration among above mentioned 3 fungicides. 2. Mancozeb frequently used on golf courses showed about 50% effect on controling algae in this study. 3. Mancozeb(75%)+Copper hydroxide(73%) and Mancozeb(75%)+Streptomycin(100%) had good effects on algae control while injuring creeping bentgrass. 4. Copper hydroxide(73%) and copper sulfate basic(58%) $including\ulcorner$Cu$\lrcorner$showed effective algae control but caused injure creeping bentgrass. 5. Streptomycin has been scarcely used on golf greens but streptomycin(20%) 0.1g a.i/$\m^2$ had good control of algae and durability without injuring creeping bentgrass.