• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.915-917
• /
• 1999

We investigated the effects of doping elements on the Bi system superconductor. The doping elements can be classified into two groups depending on their supeconducting characteristics in the Bi-Sr-Ca-Cu-O structure. The first group of doping elements(P and K) have a tendency to decompose the superconducting phase and reduce the optimal sintering temperature. The second group of doping elements(B, Si, Sn and Ba) almost uneffected the superconductivity of the 2223 and 2212 phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.57-57
• /
• 2009

Programmable Metallization Cell (PMC) is a memory device based on the electrolytical characteristic of chalcogenide materials. We investigated the nature of thin films formed by photo doping of Cu ions into chalcogenide materials for use in solid electrolyte of PMC. We were able to do more economical approach by using copper which play an electrolyte ions role. The results imply that a Cu-rich phase separates owing to the reaction of Cu with free atoms from chalcogenide materials.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.74.2-74.2
• /
• 2000

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.38-38
• /
• 2004

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 임시총회 및 하계학술연구발표회
• /
• pp.121-121
• /
• 2016

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1119-1126
• /
• 2007

Hydrogen gas and carbon nanotubes along with nanocarbon were produced from commercial natural gas using fixed bed catalyst reactor system. The maximum amount of carbon (491 g/g of catalyst) formation was achieved on 25% Ni, 3% Cu supported catalyst without formation of CO/CO2. Pure carbon nanotubes with length of 308 nm having balloon and horn type shapes were also formed at 673 K. Three sets of catalysts were prepared by varying the concentration of Ni in the first set, Cu concentration in the second set and doping with K in the third set to investigate the effect on stabilization of the catalyst and production of carbon nanotubes and hydrogen by copper and potassium doping. Particle size analysis revealed that most of the catalyst particles are in the range of 20-35 nm. All the catalysts were characterized using powder XRD, SEM/EDX, TPR, CHN, BET and CO-chemisorption. These studies indicate that surface geometry is modified electronically with the formation of different Ni, Cu and K phases, consequently, increasing the surface reactivity of the catalyst and in turn the Carbon nanotubes/H2 production. The addition of Cu and K enhances the catalyst dispersion with the increase in Ni loadings and maximum dispersion is achieved on 25% Ni: 3% Cu/Al catalyst. Clearly, the effect of particle size coupled with specific surface geometry on the production of hydrogen gas and carbon nanotubes prevails. Addition of K increases the catalyst stability with decrease in carbon formation, due to its interaction with Cu and Ni, masking Ni and Ni:Cu active sites.

• 한국진공학회지
• /
• 제12권3호
• /
• pp.193-199
• /
• 2003

아크-마그네트론 복합 공정법에 의해 Cu, Ag 도핑된 TiN 나노 복합 화합물 박막을 합성하고 각 금속원소 종류 및 함량에 따른 기계적 특성 및 나노 구조로의 상변화 거동을 관찰하였다. 합성된 박막은 약 40 ㎬의 높은 경도치를 나타내었으며 2 at% 미만의 낮은 금속 원소 함량에서 최대 경도간을 나타내었다. 금속 원소 함량이 증가할수록 결정립 미세화 및 다결정화가 진행되어 초고경도 특성을 나타내는 나노구조 박막이 합성되었으며 도핑되는 금속원소 종류에 따라 나노 구조로의 상변화 기구가 상이함을 관찰하였다. TiN 박막내 도핑된 Cu는 Ti와 일부 결합을 이루면서 Ti의 자리를 치환하는 것으로 나타났으나, Ag는 Ti와 결합을 이루거나 Ti 격자 자리를 치환하는 것이 아니라 독립적으로 결정립계에 존재하여 charge transfer만을 발생시키는 것으로 관찰되었다.

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.10-15
• /
• 2015

Cu doping by copper or $Cu_2Te$ materials enhances p+ formation in CdTe near the back contact interface, allowing better formation of ohmic contact. However, the Cu in CdTe junction is also considered as a principal component of CdTe cell degradation. In this paper, Na-doped ZnTe layer was employed as a back contact material to improve the stability of CdTe solar cells. As a process variable, post $CdCl_2$ treatment of CdS/CdTe film was conducted before or after depositing ZnTe:Na on CdTe. The change of the photovoltaic properties of CdTe cells were investigated with aging time. Low-temperature photoluminescence analysis was conducted to describe the degradation mechanism. The result showed that the CdTe solar cells with better stability compare to Cu contact were achieved using an optimized ZnTe:Na back contact.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.173-180
• /
• 1999

Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2006

졸-겔 방법을 이용하여 Fe첨가된 CuO박막 및 파우더 시료들을 제작하여 그 구조적, 전기적, 자기적 특성들을 순수한 CuO에서와 비교 분석하였다 순수한 CuO 박막은 monoclinic 구조를 가지며 상온에서 Cu 결핍으로 인한 p-type 전기전도성$(\~10^{-2}\;{\Omega^{-1}\;cm^{-1}$을 나타내었다 반면에 CuO:Fe박막은 부도체 성질을 나타내었고, 소량의 Li첨가에 의하여 p-type전도성 및 상온 강자성(ferromagnetism)을 나타내었다. 이와 같은 CuO: Fe, Li박막에서 나타난 결과는 $Li^+$ 이온의 $Cu^{2+}$ 자리 치환으로 인한 hole생성으로 전도성이 증대됨과 동시에 그 defect상태를 매개로 한 $Fe^{3+}$ 이온들간의 원거리 상호작용(long-range interaction)에 의한 강자성 효과의 증대에 기인한 것으로 해석된다. CuO: Fe파우더의 경우 박막에서와 비교하여 증대된 강자성을 나타내는데, 후열처리 온도의 증가가 자기 모멘트의 증대에 기여하였다. 뫼스바우어 측정을 통하여 CuO: Fe박막 및 파우더에서 주로 $Fe^{3+}$ 이온이 팔면체 $Cu^{2+}$ 자리를 치환하였음을 알 수 있었다.