• Macromolecular Research
• /
• v.10 no.6
• /
• pp.339-344
• /
• 2002

Poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) diblock copolymer containing high syndiotactic poly (vinyl alcohol) (PVA) was synthesized by the saponification of poly(vinyl pivalate-b-styrene) (poly(VPi-b-St)). For the block copolymer, poly(vinyl pivalate) (PVPi) with trichloromethyl end group was obtained via telomerization of vinyl pivalate with carbon tetrachloride as a telogen and 2,2-azobisisobutyronitrile (AIBN) as an initiator. Then resulting poly(vinyl pivalate) with trichloromethyl end group was used as an effient macroinitiator for the synthesis of poly(VPi-b-St) using atom transfer radical polymerization (ATRP) in the presence of CuCl/2,2'-bipyridine at 130 $^{\circ}C$. The poly(vinyl pivalate) macroinitiator, poly(VPi-b-St), poly(VA-b-St) were characterized by GPC, FT-IR and $^1$H-NMR. And the analysis showed that integrity of the block copolymer was maintained during saponification reaction.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.2
• /
• pp.78-87
• /
• 2005

In this thesis, we took some stalks, flowers, and leaves of the Hypericum ascyron L. which are able to propagate as mass in our wild to extract the dyeing solution, and cotton and silk were dyed using them in many different conditions. Silk was dyed darker than cotton with increasing the pH density. Silk was dyed darkest among Hypericum ascyron if pH was neutral. We found there was not a big difference between silk and cotton in the given condition considering 'Y' values vs. dyeing temperature. However cotton was dyed darker in hypericum ascyron. There was a rapid decreasing of 'Y' values after one to two hours and almost all of dyeing was completed at these times. We found there was a dyeing acceleration at the higher dyeing density and the lower 'Y' value. If the density was low, dyeing attachment was reduced by dyeing ability via the density of liquid in this plants. Silk was affected higher by mordant dyes in this plants. Fe and Cu had no effect on Hypericum ascyron.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.132-138
• /
• 2016

In this study, we report the fabrication of functional complex fibers, which have been studied widely globally for numerous applications. Here, we fabricated conductive complex fibers with antibacterial properties by coating metal ions on the surface of plastic (polypropylene) fibers using the electroless and electrochemical deposition. First, we polished the polypropylene melt-blown fiber surface and obtained an absorbing Pd seed layer on its surface. Subsequently, we substituted the Pd with Cu. Bis-3-sulfopropyl-disulfide disodium salt (SPS), polyethylene glycol (PEG), and ethylene thiourea (ETU) were used as the brightener, carrier, and leveler, respectively for the electroplating. We focused on most achieving the stable plating condition to remove dendrites, which are normally during electroplating metals so that smooth layer is formed on the fiber surface. The higher the amount of SPS, the higher was the extent of irregular plate-like growth. Many irregularities in the form of round spheres were observed with increase in the amount of PEG and ETU. Hence, when the additives were used separately, a uniform coating could not be obtained. A stable coating was obtained when the three additives were combined and a uniform 5-9 μm thick copper layer with a stable morphology could be obtained around the fiber. We believe that our results can be applied widely to obtain conductive fibers with antibacterial properties and are useful in aiding research on conductive lightweight composite fibers for application in information technology and robotics.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.37-43
• /
• 2020

This study was conducted to evaluate the effects of different nitrogen levels on the yield and nutrient quality of a newly developed domestic hybrid of Teosinte, Geukdong 6〔Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis〕. The field experiment was conducted in a randomized block design with three replicates and consisted of four nitrogen (N) application rates, T1 (200 kg/ha), T2 (300 kg/ha), T3 (400 kg/ha), and T4 (500 kg/ha). No differences were found in plant length, leaf length, leaf width, leaf number, dead leaves, stem hardness, tiller number, and fresh yield (p>0.05). The T3 showed significantly greater dry matter yield at harvest (heading stage) compared to the other treatments (p<0.05). The crude protein content of T4 (10.49%) was higher than those of T1 and T2 (p<0.05). However, there was no significant difference between T4 (10.49%) and T3 (9.63%). The effects on crude fat, crude ash, neutral detergent fiber (NDF), acid detergent fiber (ADF), and crude fiber were not significant (p>0.05). The sugar content was higher in the T2 treatment than the other treatments (p<0.05). For Ca, T3 showed significantly greater content (p<0.05). However, no significant effects were found in the contents of Cu, Fe, K, Mg, Mn, Mo, and Zn (p>0.05). Na content was higher in order of T2 > T4 > T3 > T1 (p<0.05). Total mineral contents were not significantly different among the treatments (p>0.05). Given these results, we recommend the amount of nitrogen fertilization necessary for "Geukdong 6" to be around 400 kg per ha (T3), when considering, high fresh yield, dry matter yield, number of leaves and content of crude protein.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.418-425
• /
• 2019

A piezoelectric ceramic fiber composite (PCFC) was successfully fabricated using $0.69Pb(Zr_{0.47}Ti_{0.53})O_3-0.31[Pb(Zn_{0.4}Ni_{0.6})_{1/3}Nb_{2/3}]O_3$ (PZT-PZNN) for use in small-scale wind energy harvesters. The PCFC was formed using an epoxy matrix material and an array of Ag/Pd-coated PZT-PZNN piezo-ceramic fibers sandwiched by Cu interdigitated electrode patterned polyethylene terephthalate film. The energy harvesting performance was evaluated in a custom-made wind tunnel while varying the wind speed and resistive load with two types of flutter wind energy harvesters. One had a five-PCFC array vertically clamped with a supporting acrylic rod while the other used the same structure but with a five-PCFC cantilever array. Stainless steel (thickness: $50{\mu}m$) was attached onto one side of the PCFC to form the PZT-PZNN cantilever. The output power, in general, increased with an increase in the wind speed from 2 m/s to 10 m/s for both energy harvesters. The highest output power of $15.1{\mu}W$ at $14k{\Omega}$ was obtained at a wind speed of 10 m/s for the flutter wind energy harvester with the PZT-PZNN cantilever array. The results presented here reveal the strong potential for wind energy harvester applications to supply sustainable power to various IoT micro-devices.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.69-93
• /
• 1996

In Korea, buckwheat has historically held a very important position because it has been used as a food and traditional medicine. The objectives of this report were to mainly review the up to present papers includings 75 references about buckwheat's rutin, functional ingredients and their variations. Buckwheat provides an abundance of such nutrition as protein, amino acids, vitamin($B_1,\;B_2$, E, P), minerals(Fe, Zn, Mn, Mg, P, Cu, Ca, Se) and dietary fiber. Buckwheat's essential amino acid, lysine, is notably higher amount than cereals. Rutin(vitamin P), one of a group of flavonoids, is abundant in buckwheat and noted for its beneficial function of reducing every kinds of radiation and vascular diseases, diabetes mellitis and retinal hemorrhage, etc. Rutin also acts as a pigment stabilizer and acetone extracts of buckwheat have a potent tyrosinase inhibitory activity.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2003

Analytical chemists frequently use filter papers during the course of experiments without any hesitation. However, the results of analysis could be deteriorated by the various ions which are extracted from filter papers. In some filter paper made for qualitative use, about $300{\mu}g$ sodium and many other cations were detected. Although the quantities of contaminants was low in the filter paper made for quantitative use, significant amount of Fe, Si, Al, Cu and Zn was detected as well as alkali element. Many cations and anions were also detected in the filtrate obtained from the glass fiber filter.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.258-262
• /
• 1978

Proximate composition, minerals and fatty acid in dried chicory root (moisture content 7.0%) are analyzed and subsequent results are as follows: Crude protein, crude fat, crude fiber, total sugar and ash content in chicory root are 8.6%, 1.6 %, 6.9%, 58.5% and 4.2%, respectively. Mineral content of Ca, P, Fe, Mg and Si in the root are 1,560, 180, 10,600 and 180 mg%, respectively. Other minerals such as K, Na, Al, Zn, Ag, Cu and Ti are also determined. Unsaturated fatty acid content in total fat of the root is 65.4%, Particularly high in linoleic acid. Uridine-5'-diphospho-glucose, as sole nucleotide-sugar in the root, was detected.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.188-191
• /
• 2002

A glucan and a fructan producing enzymes from Leuconostoc mesenteroides NRRL B-1149 were prepared and concentrated from the cu1ture of 1.5% sucrose using polysulfone ultrafiltration hollow fiber in the presence of 0.1% (w/v) Tween 80, 1 mM $CaCl_2$, and 0.02% $NaN_3$. The molecular masses of the enzymes were estimated to be about 213.6 kDa and 180 kDa, respectively, based on the PAS staining for the glucosyltransferase and Mukasa method for fructosyltransferase. Polymers produced by the enzymes showed different solubility; an insoluble glucan and a soluble fructan. The linkages of polymers were determined by methylation using Hakomori reagent and following acid hydrolysis. The glucan was composed of ${\alpha}$-1,6 and 1,3 linkages and the fructan showed similar linkage data of levan.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.4
• /
• pp.149-157
• /
• 2015

We investigated the effects of the fabric structure or the kinds of plated metals on the electromagnetic interference shielding effectiveness (EMI SE) by means of electroless plating on polyester fabric. We found that the weight of deposited metal, EMI SE, and flexibility of the conductive fabric for EMI shield is affected by morphology of fabric and structure of fiber. The EMI SE of conductive fabric plated Ni/Cu/Ni by electroless plating method on draw textured yarn (DTY) polyester was in the practically useful range of above 70 dB over a wide frequency range of 10 MHz to 1.0 GHz at the surface resistivity of $0.05{\Omega}/{\square}$. Au or Ag plated conductive fabric by immersion plating method is not able to provide for a good EMI SE.