• Current Photovoltaic Research
• /
• 제9권3호
• /
• pp.96-105
• /
• 2021

Even though above 22% efficiencies have been reported in Cd-free Cu(In,Ga)Se₂ (CIGS) solar cell with Zn-containing buffers, the efficiencies with Zn-containing buffers, in general, are well below 20%. One of the reasons is Zn diffusion from the Zn-containing buffer layer to CIGS film during buffer growth. To avoid the degradation, it is necessary to prevent the diffusion of Zn atoms from Zn-containing buffer to CIGS film. For the purpose, we characterized an In₂Se₃ film as a possible diffusion barrier layer because In₂Se₃ has no Zn component. It was found that an In₂Se₃ layer grown at 300℃ was very effective in preventing Zn diffusion from a Zn-containing buffer. Also, the In₂Se₃ had a large potential barrier in the valence band at the In₂Se₃/CIGS interface. Therefore, In₂Se₃ passivation has the potential to achieve a super-high efficiency in CIGS solar cells that employ Cd-free ALD processed buffers containing Zn.

• 한국자기학회지
• /
• 제1권1호
• /
• pp.25-29
• /
• 1991

단롤법 급냉응고장치를 이용하여 디스크 표면속도 40m/s로 Sm-Fe-Ti 리본시편을 제작하하고 이의 결정구조 및 자기특성을 조사하였다. 급낸응고상태에서 $Sm_{x}Fe_{100-x-y}Ti_{y}(3.8{\leq}x{\leq}11.5,\;3.8{\leq}y{\leq}19.2)$ 합금은 전 조성에 걸쳐 $TbCu_{7}-type$ 구조의 준안정상이 형성되고 조성에 따라 ${\alpha}-(Fe,\;Ti),\;Fe_{2}Ti$. 비정질 및 $d=2.14{\AA}$에 강한 회절선을 나타내는 미지의 상 등이 존재함을 알 수 있었다. 한편, 급냉응고에 의하여 생성된 이들 $TbCu_{7}-type$ 구조의 준안정상은 $850^{\circ}C$에서 45분간 열처리한 후에도 완전하게 안전상으로 변태되지 않았으나 $SmFe_{11}Ti$ 조성에서는 거의 완전한 변태가 이루어짐을 알 수 있었다. 최적조건($850^{\circ}C{\times}45분$)으로 열처리한 $SmFe_{11}Ti$ 급냉응고리본은 주상인 $ThMn_{12}$ 구조의 경자성상과 연자성상인 $\alpha$-(Fe, Ti) 및 반강자성 $Fe_{2}Ti$ 등으로 구성되어 있었으며, $\alpha$-(Fe, Ti) 및 $Fe_{2}Ti$의 생성은 열처리시 Sm 원자의 증발에 기인한 것으로 판명되었다. 최적조건으로 열처리한 $SmFe_{11}Ti$ 급냉응고리본의 표면 및 내부 조성에 대한 원자비율은 각각 $SmFe_{25.8}Ti_{2.6}$ 및 $SmFe_{11.7}Ti_{1.0}$이었으며, $\alpha$-(Fe, Ti) 및 $Fe_{2}Ti$의 대부분은 리본의 표면층에 존재하는 것으로 관찰되었다.

• 한국재료학회지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2000

1 keV $Ar^+$ 이온빔을 이용하여 polytetrafluoroethylene (PTFE)의 표면을 개질하고 그 위에 $5000\;{\AA}$의 구리 박막을 이온빔 스퍼터링법을 이용하여 증착하였다. 이온빔 조사에 의하여 PTFE의 표면에는 cone이 형성되며 cone의 높이는 이온 조사량이 증가함에 따라 점차로 증가함을 알 수 있었다. x-ray photoelectron spectroscopy (XPS) 분석을 통하여 조사된 PTFE의 표면에서는 이온 조사량이 증가함에 따라 Fls peak의 강도가 감소하며 이는 F 원자의 선택적인 스퍼터링에 기인한 것으로 생각된다. 또한 이온 조사에 의해 생성된 불안정한 사슬들은 crosslinking에 의하여 새로운 C-F 계열의 결합들을 생성하였다. 이온빔 스퍼터링법에 의하여 증착된 구리 박막은 PTFE 표면의 cone을 따라 균일하게 증착되며 PTFE의 표면 거칠기가 증가함에 따라 (111) 방향으로 우선 성장함을 알 수 있었다. 증착된 구리 박막의 비저항은 개질전 PTFE의 $2.7{\mu}{\Omega}cm$에서 $1{\tiems}10^{16}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE의 $4.3{\mu}{\Omega}cm$까지 이온 조사량에 따라 점차로 증가하였다. $1{\tiems}10^{17}/\textrm{cm}^2$의 이온 조사량으로 개질된 PTFE 위에 증착된 구리 박막의 갑작스런 비저항 증가는 구리 박막의 단락에 의한 것으로 보인다.

• 대한화학회지
• /
• 제54권5호
• /
• pp.515-522
• /
• 2010

o-phenylene diamines, dehydroacetic acid (DHA) 및 p-chloro benzaldehyde에서 유도된 세자리 Schiff 염기 리간드인 4-hydroxy-3(1-{2-(benzylideneamino)-phenylimino}-ethyl)-6-methyl-2H-pyran-2-one (HL)의 Cu(II), Ni(II), Co(II), Mn(II) 및 Fe(III) 착물의 형성상수와 항미생물 활성과의 관계를 연구하였다.리간드와 착물은 원소분석, 전도도, 자기수자율, 열분석, X-선 회절, IR, $^1H$-NMR, UV-vis 및 질량 스펙트럼으로 특성조사를 하였다. 분석데이터로부터 착물들의 화학량론비가 1:2 (금속:리간드)임을 알았다. 금속 착물들의 몰 전도도 값은 이들의 비전해질 성질을 의미한다. X-선 회절 데이터에서 Ni(II) 착물은 단사정계 그리고 Cu(II) 및 Co(II) 착물은 삼사정계 결정계임을 규명하였다. IR 스펙트럼 데이터로부터 리간드는 중심금속에 대해 ONN 주개원자 배열의 세자리 리간드로 행동함을 알았다. 열적 행동 (TG/DTA)과 Coats-Redfern 법에 의해 계산한 반응속도 파라메터는 착물형성 과정에서 좀 더 질서 있는 활성화 상태를 제안하고 있다. 착물의 양성자화 상수를 THF:물 (60:40) 용액, $25^{\circ}C$ 및 이온세기 ${\mu}=0.1\;M$ ($NaClO_4$)에서 전위차법으로 측정하였다. Staphylococcus aureu 및 Escherichia coli.에 대한 항박테리아 활성을 시험관에서 조사하였다. 또한 Aspergillus Niger 및 Trichoderma에 대한 항세균 활성도 조사하였다. 금속 이온 및 착물의 안정도가 항미생물학적 활성에 미치는 영향을 고찰하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.292-300
• /
• 2001

The paper describes spectroscopic characteristics of plasma induces in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg lines, as well as the intense molecular spectra of A10 and Mg0 formed by chemical reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere, Mg0 and AI0 spectra vanished, but AIH spectrum was detected. The hydrogen source was presumably hydrogen dissolved in the base metals, water absorbed on the surface oxide layer, or $H_2$ and $H_2O$ in the shielding gas. The resonant 1ines of Al and Mg were strongly self-absorbed, in particular, self-absorption of the Mg 1ine was predominant. These results show that the laser induced plasma was made of metal1ic vapor with relatively low temperature and high density.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.201-208
• /
• 2013

Copper (II) and Nickel (II) mimic complexes of enzyme carbonic anhydrase were evaluated under ambient condition for carbon dioxide capture and conversion process. The synthesized complexes were characterized by ATR-FTIR and UV-DR spectroscopy. It was found that all the complexes have biomimetic activity towards $CO_2$ using para-nitrophenyl acetate (p-NPA) hydrolysis as the model reaction. Interestingly, the proper geometry obtained by the restricted orientation of tripodal N atoms in Cu (II) complex of 2,6-bis(2-benzimidazolyl) pyridine showed the highest activity (1.14 au) compared to others. The $CO_2$ bio-mineralization to $CaCO_3$ was carried out via in-vitro crystallization approach. Results indicate that the biomimetic complexes have a role in determining $CaCO_3$ morphology. The present observations establish a qualitative insight for the design of improved small-molecule catalysts for carbon capture.

• 한국진공학회지
• /
• 제8권3B호
• /
• pp.297-301
• /
• 1999

High quality CdTe single crystal for the solar cell fabrication was grown by vertical Bridgman method. The etch pits patterns of {111} surfaces of CdTe etched by Nakagawa solution was observed the {11} A composed of Cd atoms with typical triangle etch pits of pyramid mode. From the photoluminescence measurement of {111} A, we observed free exciton $(E_x)$ existing only high quality crystal and neutral acceptor bound exciton ($A^{\circ}$, X) having very strong peak intensity. Then, the full width at half maximum and binding energy of neutral acceptor bound exciton were 7 meV and 5.9 meV, respectively. By Haynes rule, and activation energy of impurity was 59meV. Therefore, the origins on impurity level acting as a neutral acceptor were associated Ag or Cu elements.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2006

The composition and structure of dendrite phase within $Zr_{76.11}Ti_{4.20}Cu_{4.51}Ni_{3.16}Be_{1.49}Nb_{10.53}$ bulk metallic glass (BMG) were confirmed by using an EPMA, XRD and TEM, respectively. The chief elements of dendrite phase were Zr-Ti-Nb and had a BCC structure. The thermal properties of this BMG have been then subsequently investigated by using a differential scanning calorimeter (DSC). The glass transition and crystallization onset temperatures were determined as $339.7^{\circ}C$ and $375.8^{\circ}C$ for this alloy, respectively. Mechanical properties have also been examined by conducting a series of uniaxial compression tests at various temperatures within supercooled liquid region under the strain rates between $10^{-4}/s$ and $3{\times}10^{-2}/s$. The deformation behavior of BMG composite within supercooled liquid region is similar to one of Vit-1 exhibiting amorphous single phase alloy. The flow stresses of BMG composite, however, are entirely higher than those of Vit-1 because dendrite phases are interfere with moving of atoms.

• 대한화학회지
• /
• 제7권4호
• /
• pp.257-263
• /
• 1963

The crystal structure of nicotinic acid hydrochloride has been determined by two-dimensional x-ray method. The unit cell is monoclinic with a = 7.21 ${\AA}$, b = 6.69 ${\AA}$, c = 7.54 ${\AA}$, ${\beta}=100^{\circ}$, space group $C{\frac{2}{2}}-P2_1$, and contains two formula units. Weissenberg diagrams have been taken along the a, b and c axes with Cu K${\alpha}$ radiation and the positions of the atoms have been fixed by means of two dimensional Patterson syntheses, a Fourier projection along the b-axis and trial and error method. The bond lengths are: pyridine ring C-C = 1.38, 1.39 ${\AA}$, C-N = 1.34, 1.36 ${\AA}$, carboxyl group $C_4-C_6$ = 1.46 ${\AA}$, $C_6-O_1$ = l.33 ${\AA}$, $C_6-O_2$ = 1.19 ${\AA}$. The ring nitrogen atom may be regarded as forming bifurcated hydrogen bond with an oxygen atom $O_2$ of one neighbouring molecule and with a neighbouring chlorine atom, being linked by forming a hydrogen bond with an other oxygen atom $O_1$ of above mentioned neighbouring molecule, in such a way that chains parallel to the c-axis are formed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.360-368
• /
• 1999

The paper describes spectroscopic characteristics of plasma induced in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn and singly ionized Mg lines as well as the intense molecular spectra of ALO and MgO formed by chemi-cal reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere MgO and AlO spectra vanished but AlH spectrum was detected. the hydrogen source was presumable hydrogen dissolved in the base metals water absorbed on the surface oxide layer or $H_2$ and $H_2O$ in the shielding gas. The resonant lines of Al and Mg were strongly self-absorbed in particular self-absorption of the Mg line was predominant. These results show that the laser induced plasma was made of metallic vapor with relatively low temperature and high density.