• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.11
• /
• pp.1374-1382
• /
• 1995

In TFT-LCDs, as the display size area becomes larger, and the resolution higher, we have to consider the image degradation effects due to the incorporation of the TFT-LCD parameters such as the data-line resistance, the common electrode resistance, the data-line to common parasitic capacitance, and the output characteristics of driver ICs. One of the degradation effects is crosstalk resulting from the coupling between the source bus-line and common electrode. Since a source signal which represents a large number of display data is supposed to vary frequently, the common signal level is affected through the coupling effect, resulting in the degradation of nearby pixel drive signals. Therefore, we proposed a method to compensate for this source-common electrode coupling effect, we also designed and experimented the feasibility of our crosstalk compensation circuit in the actual TFT-LCD. We saw that the newly designed compensation circuit greatly reduced the crosstalk in display pattern image.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.260-264
• /
• 2003

It is possible to design the high performance, integration and low cost radio frequency components by using LTCC(Low Temperature Cofired Ceramic) technology. But there is a critical point to design the spiral inductor because of crosstalk effects. of the crosstalk effect of the spiral inductor are investigated using full-wave analysis of the FEM(Finite Element Method) in this paper. The results show that input power of the spiral inductor are coupled from 0.1% to 10% above 3GHz. Therefore, we should consider the crosstalk effects when we design the LTCC.

• Publications of The Korean Astronomical Society
• /
• v.31 no.3
• /
• pp.35-41
• /
• 2016

We have constructed a wide-field photometric survey system called as the Korea Microlensing Telescope Network (KMTNet) in 2015. It consists of three 1.6 m optical telescopes equipped with mosaic CCD cameras. Four 9k CCDs were installed on the focal plane of each telescope. In this paper, we present the crosstalk analysis of the KMTNet mosaic CCD images. The crosstalk victims caused by bright sources were visible at eight sub-images obtained through different readout ports of each CCD. The crosstalk coefficients were estimated to be several tens of $10^{-4}$ in maximum, differing from sub-image to sub-image, and the non-linearity effect certainly appeared at the victims made from saturated sources. We developed software functions to correct the crosstalk effect of the KMTNet CCD images. The software functions showed satisfying results to remove clearly most of the crosstalk victims and have been implemented in the KMTNet image processing pipeline since 2015 September.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.71-76
• /
• 2007

The effect of crosstalk errors is most significant in high-performance circuits. This paper presents effective test patterns for SoC and Board level interconnects considering actual effective aggressors. Initially '6n' algorithm, where 'n' is the total number of interconnect nets, is analyzed to detect and diagnose 100% crosstalk faults. Then, more efficient algorithm is proposed reducing the number of test patterns significantly while maintaining complete crosstalk fault coverage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.119-126
• /
• 2007

This paper presents an efficient heuristic algorithm to avoid crosstalk which effects to delay of CMOS digital circuit by downsizing and upsizing of Gate. The proposed algorithm divide into two step, step1 performs downsizing of gate, step2 performs upsizing, so that avoid adjacent aggressor to critical path in series. The proposed algorithm has been verified on LGSynth91 benchmark circuits and Experimental results show an average 8.64% Crosstalk Avoidance effect. This result proved new potential of proposed algorithm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.782-788
• /
• 2008

In this paper, a comparison about two representative Transfer Path Analysis(TPA) methods for air-borne noise based on, matrix inversion method and pressure transmissibility, are presented on the view point of crosstalk effect between sources. In order to assess accuracy of two methods according to path models between virtual airborne noise sources, experiments are made for two cases, weak and strong crosstalk effect condition, by using acrylic vehicle model. Based on this assessment, the paper presents a reasonable application criteria for TPA method according to the circumstances of air-borne noise sources.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.33-38
• /
• 2001

Readout signal of high density DVD-RAM disk output was simulated to analyze the effect of crosserase and crosstalk to the readout signal which is one of the main difficulties to realize high density DVD-RAM system having single side recording density of 4.7 G13 and 15 G13 media. Laser beam intensity impinged on the disk was approximated as Gaussian and recorded marks were assumed elliptical and the readout signal was calculated as a two dimensional convolution of laser beam pattern and recored mark pattern. From the readout signal obtained by varying crosserase ratio, carrier levels with period of 3T to 11 T were calculated and compared. Jitter due to crosserase and crosstalk was calculated and compared using 1,000 random marks having 3T to 11T period. The results showed that the jitter due to crosserase turned out to be smaller than the jitter due to crosstalk.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.22-28
• /
• 1998

Signal transmission and crosstalk of coupled bondwires buried in plastic packages are analyzed using the Method of Moments and the Fourier Transform algorithm. It is also shown that the quasi-static crosstalk model of SPICE is inappropriate for designing the high-speed plastic packages. Plastic packaging material, increasing the self and mutual capacitances, is found to be helpful for the signal transmission integrity due to the dielectric compensation effect. However, it is also observed that the plastic material increases the crosstalk due to the radiation-enhanced mutual coupling effect. By investigating the geometrical and material dependence of the pulse transmission and crosstalk, it is found that the radiation-enhanced coupling effect is significant for most of typical bondwire geometries and plastic package materials. These calculation results can be effectively used for designing plastic packages of high-speed digital IC's and monolithic RFIC's.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.58-65
• /
• 2007

The method of 3D sound realization using 2 speakers provides two advantages: cheap and easy to build. In the case, crosstalk between 2 speakers has to be eliminated. To calculate and remove the effect of the crosstalk it is essential to find a rotation angle of human head correctly. In the paper, we suggest an algorithm to find the head angle of 2 channel system. We first detect a face area of the given image using Haar-like feature. After that, the eve detection using pre-processor and morphology method. Finally, we calculate the face rotation angle with the face andi the eye location. As a result of the experiment on various face images, the proposed method improves the efficiency much better than the conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.774-783
• /
• 2012

In this paper, a periodically corrugated transmission line is proposed. The proposed transmission line can reduce crosstalk between transmission lines. The corrugated transmission line can adjust the amount of inductive coupling and capacitive coupling equally. Thus, the crosstalk is effectively reduced because the inductive coupling and capacitive coupling cancel each other. The corrugated transmission line is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm. The simulated far-end crosstalks of conventional transmission line and corrugated transmission line with a period of A=1 mm have maximum values of -3.6 dB and -22 dB, respectively, up to 30 GHz. Measurement results showed that far-end crosstalks of the conventional and corrugated transmission line have maximum values of -6.3 dB and -20.5 dB, respectively, up to 30 GHz.