• Speech Sciences
• /
• v.3
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.880-885
• /
• 2000

In a verical type, vibratory gyroscope, the coupled motion between the reference and sensing vibrations causes the zero-point output which means non-zero sensing vibration without angular velocity. This structural coupling leaks to an inherent discrepancy between the natural frequencies of the reference and sensing oscillations, causing the degradation of the sensing performance and dynamic stability. In this paper, the dynamic characteristics associated the coupling phenomenon are theoretically analyzed. Effects of reference frequency and coupling factor on the rotational direction and amplitude of elliptic oscillation are studied. A technique to predict the existence of curve veering of crossing in frequency trajectories is introduced to apply the design of micro gyroscopes with decoupled structures.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.50-54
• /
• 2014

This study presents a method for heart rate detection using oscillation wave signal and tries to enhance the performance of peak detection. For this objective, the method uses the average slopes around the main peak. The crossing point of the increasing and the decreasing slopes is selected as the peak point of heart rate period. The proposed method showed smoothed heart rate graph and reduced irregularity in heart rate values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1605-1612
• /
• 1996

In this paper, a new approach for continuous digits recognition using the Spatio-Temporal Neural Network (STNN) is reported. The continuous seven digits are gargeted to recognize, and our initial recognition rate was 28%. In this paper, to increase the recognition rate, two methods are proposed. In the first method, to compensated the STNN's own defect as well as to emphasize the Korean digits' phonic characteristics, the starting point ofeach digit is detected using the energy and zero-crossing rate, but the ending point is detectedonly using the energy value. In this case, the seven digits recognition reate increased to 61%. Furthermore, in the second method, considering the fact that a same digit could be pronounced differently in continuously spoken environment, the number of STNNs used to represent each digit is increased from one to five. Consequently, the same digit but pronounced differently could be handled well in the new system. As a result of that, the continuously spoken seven digits recognition rate increased to 89%.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1294-1296
• /
• 2005

Because of its cost effectiveness, the Brushless DC Motor(BLDCM) is focused by the industry these days. Considering the constant back-EMF region of the BLDCM, only a simple position information should be provided for constant torque control. From this point of view, using expensive position sensors, such as encoder, resolver, etc, decreases the cost effectiveness of the BLDCM. The Proposed detecting circuit detects position of zero crossing point(ZCP) then relative position could be calculated from ZCP. This circuit is robust to noise because of working in the current level. BLDCM is driven from the position information by the ZCP The reliability on BLDCM sensorless control using the voltage detecting circuit is shown through simulation using Matlab.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.559-573
• /
• 2007

Orthotropic steel decks are manufactured by welding thin plates therefore it is inevitable that there are abundant works of welding process. On connection of transverse rib web, crossing point of longitudinal rib, transverse rib and deck plate and cut-out parts of transverse rib are the significant position of stress concentration because of out of plane and oil-canning deformation caused by longitudinal rib distortion with shear force and distortion. At the current research, the crossing point where the orthotropic steel decks's effect of improving fatigue performance are high, not placing scallop and diaphragm which have same plane with transverse rib placed inside of longitudinal rib at the same time, the reduce effects of stress concentration at the cut-out section and the crossing are high. Especially the installation of the diaphragm causing great effects based on research results to stress concentration appearance reduce effects at the cut-out section, putting radius of curvature of the diaphragm's top and bottom as a target, as a result of carrying out the parametric analysis an optimal diaphragm form that has great effects in fatigue performance came to a conclusion. Also based on optimal diaphragm form, an advantage of the diaphragm optimal setting position for improvement of the fatigue performance came to a conclusion.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.1-13
• /
• 2014

Potential Energy Surface(PES)를 양자 계산을 통해 알아내는 것은 화학 반응을 이해하는 데에 큰 도움이 된다. 이를테면 Transition State(TS)의 configuration을 알 수 있고, 따라서 reaction path와 활성화 에너지 값을 예측하여, 진행시키고자 하는 화학반응의 이해를 도울 수 있다. 하지만 PES를 그리기 위해서는 해당 분자의 다양한 configuration에 대한 singlet point energy 계산이 필요하기 때문에, 계산적인 측면에서 많은 비용을 요구한다. 따라서 product와 reactant의 구조와 같은 critical point의 정보를 이용하여 최소한의 configuration을 sampling하여 전체 PES를 재구성하는 기계학습 알고리즘을 개발하여 다차원 PES 상에서의 화학반응의 예측을 가능하게 하고자 한다. 본 연구에서는 Barbaralane의 두 안정화 된 구조의 critical point로 하여 이 주변을 random normal distribution하여, B3LYP/6-31G(d) level의 DFT 계산을 통해 relaxed scanning하여 구조와 에너지를 구하였으며, 이 정보를 Support Vector Regression(SVR) 알고리즘을 적용하여 PES를 재구현하였으며, 반응경로와 TS의 구조 그리고 활성화 에너지를 구하였다. 또한 본 기계학습 알고리즘을 바닥상태에서 일어나는 반응이 아닌, 들뜬 상태와 전자 구조가 변하는 화학반응, avoid crossing, conical intersection과 같은 Non-adiabatic frame에서 일어나는 현상에 적용 가능성을 논하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.2
• /
• pp.67-77
• /
• 2008

It has been observed that the linear relationship between the logarithm of bioconcentration factor (log BCF) of highly hydrophobic chemicals and their log $K_{ow}$ breaks when log $K_{ow}$ becomes greater than 6.0. Consequently, super hydrophobic chemicals were not thought to cause baseline toxicity as a single compound. Researchers often call this phenomenon as "hydrophobicity cutoff" meaning that bioconcentration or corresponding baseline toxicity has a certain cutoff at high log $K_{ow}$ value of hydrophobic organic pollutants. The underlying assumption is that the increased molecular size with increasing hydrophobicity prohibits highly hydrophobic compounds from crossing biological membranes. However, there are debates among scientists about mechanisms and at which log $K_{ow}$ this phenomenon occurs. This paper reviews three hypotheses to explain observed "cutoff": steric effects, kinetic or physiological limitations, and chemical activity cutoff. Although the critical molecular size that makes biological membranes not permeable to hydrophobic organic chemicals is uncertain, size effects in combination with kinetic limitation would explain observed non-linearity between log BCF and log $K_{ow}$. Chemical activity of hydrophobic chemicals generally decreases with increasing melting point at their aqueous solubility. Thus, there may be a chemical activity cutoff of baseline toxicity if there is a critical chemical activity over which baseline effects can be observed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.982-988
• /
• 2002

Current design equations for shear strength of reinforced concrete columns generally overestimate the shear strength contribution by the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the imprudent application of the classical truss model to the circular section, which is different in shear-resisting mechanism from the rectangular section. This study presents a rational model for the prediction of shear strength contribution by the circular transverse reinforcement considering the starting location of a diagonal crack, the number of transverse reinforcing bars crossing the main crack and the geometrical strength component of the transverse resistance. It was found that, for lower amount transverse reinforcement, the crack starting point and the number of crack crossing bars greatly influence the shear-resisting capacity. Proposed model leads to a reliable design equation which is derived using a linear regression method and is in good agreement with the lower bound of exact strength curve.