• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.3
• /
• pp.337-343
• /
• 1986

To clarify the existing serological varieties of Leptospira interrogans in Korea, 15 isolates of 1985 were serologically studied by cross agglutinin adsorption test. Fourteen cultures except HS 7 belonged to serogroup Icterohemorrhagiae. Isolate HM 3 and HV 8 were considered to belong to serotype mwogolo by their low residual homologous antibody(0.08 to 6.25%) after cross adsorption with serotype mwogolo referene culture and antiserum. Both residual homologous antibody of isolate HS 7 and serotype canicola reference culture remained 1.56%, accordingly HS 7 proved to belong to serotype canicola. The agglutinogens of isolate HY2, AP3, AP4, AP7 and AP9 are considered to closely related to serotype mwogolo, and HM4 and HS6 to serotype birkini, which remained to be further studied. The remaining 5 strains(HY1, HS5, HY10, 310-9, 310-19) could not be attached to any known serotype of Icterohemorrhagiae serogroup by cross adsorption test.

• The Journal of Korean Society of Virology
• /
• v.26 no.2
• /
• pp.191-204
• /
• 1996

The characterization of the 5 Korean isolates (K96P10, K94P05, K91P55, K87P39, and K82P01) of Japanese encephalitis virus (JEV) was compared with JE virus prototype Nakayama-NIH (NKY-NIH) using prM/M and envelope gene sequences of the JEV genome and phylogenetic analysis. The antigenic analysis of these viruses were done by the cross-hamagglutination inhibition (HI) test using polyclonal antibodies against Korean isolates and NKY-NIH. The sequence homology of the Korean isolates and NKY-NIH ranged between 87.4 % - 95.6 % at the nucleotide level and between 98.2 % - 97.2 % at the amino acid level over the E nucleotides compared. Alignment of E protein amino acid sequences revealed that residue positions E89, E129, E221, E244, E327, E366, E459, and E477 characterized the Korean strains. According to phylogenetic analysis bases on the E nucleotide, there are at least 2 genetic types of JEV existing in Korea and Korean strains were distinct from NKY-NIH. However, the cross HI test results of all the Korean isolates were serologically no different from NKY-NIH strain.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.95-104
• /
• 2019

Along with the economic globalization and network generalization, this provides a good opportunity to the development of cross-border e-commerce trade. Based on this background, this paper sets ASEAN countries as an example to exploit the determinants of cross-border e-commerce trade including the export and the import, respectively. The panel data from the year of 1998 to 2016 will be employed to estimate the relationship between cross-border e-commerce trade and relevant variables under the dynamic ordinary least squares and the error correction model. The findings of this paper show that there is a long-run relationship between cross-border e-commerce trade and relevant variables. Generally speaking, the GDP(+) and real exchange rate(-export & +import) have an effect on cross-border e-commerce trade. However, the population (+) and the terms of trade (-) only have an effect on cross-border e-commerce import. The empirical evidences show that the GDP and the real exchange rate always affect the development of cross-border e-commerce trade. Therefore, all ASEAN countries should try their best to develop the economic growth and focus on the exchange rate regime so as to meet the need of cross-border e-commerce trade development.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.1
• /
• pp.47-56
• /
• 2019

As the zero interest rate era was over with the end of quantitative easing, the economy of several global markets observed the fluctuations of the base interest rate. Interest rate, which is the change of money value with respect to time, is negatively correlated with construction investment. Considering the characteristics of interest rates and construction investment as economic variables, the necessity of cross-border analysis between base interest rate and construction investment was suggested in this paper. Cross-correlation analysis between base interest rates and construction investment crossing the border was performed. The effective correlations were confirmed with values varying by countries. Similar characteristics were also observed among countries with similar economy, which were then divided into three groups. Additionally, identifying the base interest rate that affects the construction investment of a particular country was made possible by reflecting a self-cycle of base interest rates. Lastly, from the result of examining the influence of each rise and fall of the interest rate, it was verified that the difference was more than twice as large in some countries. These results are expected to contribute to construction-related policy makers or investors to make decisions in response to the economic status of the construction market.

• Journal of The Korean Association For Science Education
• /
• v.36 no.6
• /
• pp.815-833
• /
• 2016

This study investigated children's (grade 3 to 9) responses to assessment items on energy as a cross-cutting concept in order to get basic information for a learning progression. The assessment consisted of 8 ordered multiple-choice items at the contexts of electric circuit, mechanical energy of falling objects, phase change of matter, dissolution, biological phenomena of a lizard, food chain, radiative equilibrium between Sun and Earth, and the system of water cycling. Children's responses to each item were analyzed with using cross-tabulations in terms of grades and item option levels and Wright map and Differential item functioning based on Rasch modeled item response analysis. The results offered empirical evidence of children's development of understanding energy from relation between energy and its phenomena, types of energy, transfer and conversion of energy, towards conservation and equilibrium of energy for all of eight contexts. Children of each grade did not fully understand energy conservation. As grade goes up, their understandings of energy transfer and conversion were differentiated across the contexts and topics of energy. According to Rasch analysis, children had easier understanding of energy on dissolution and poorer understanding of energy on water cycling than that on other contexts. It was discussed and suggested that the results of this study help us organize science topics with regard to energy when developing new national science curriculum.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.923-928
• /
• 2014

Elongation rolling process is an intermediate process to make the uniform thickness and uniform surface roughness during producing seamless pipes. The thickness and surface roughness of seamless pipes are generally affected by the distance of rolls and guide shoes, the roll shape, and its cross angle. In this study, finite element analysis for shape forming process is based on the analysis model of elongation rolling mill with guide shoes. This paper shows how the cross angle of the roll, the rolling rpm, and the distance of the guide shoe influence on the outer diameter and the thickness of seamless pipes. The rolling rpm did not give much influence on outer diameter.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.11-16
• /
• 2012

In this paper, the authors formulate the sensitivity analysis algorithm for the natural frequency of a torsional shafting by expanding the transfer stiffness coefficient method. The basic concept of the present algorithm is based on the transfer of sensitivity stiffness coefficient, which is the derivative of stiffness coefficient with respect to design parameter, at every node from the first node to the last node in analytical model. The effectiveness of the present algorithm is confirmed by comparing the results of the sensitivity analysis and those of the reanalysis for the natural frequencies of a torsional shafting with a constant cross section. In numerical calculation, the design parameter is the diameter of the shaft element of the torsional shafting.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.139-145
• /
• 1996

Many of the bridge systems, including the girders and cross-beams, and concrete decks behave as the special othotropic plates. A method of calculating the natural frequency corresponding to the first mode of vibration of beam and tower structures with irregular cross-sections was developed and reported by D. H. Kim in 1974. Since 1989, The author has extended this method to Vibration analysis of two dimensional problems including composite laminates, and has reported at several conferenes. Frequently, the bridge floor panels are supported by girders and cross beams. Such panels as well as some of the building floor panels can be assumed as simple supported special orthotropic plates. In this paper, the result of application of simple method of vibration analysis developed by D. H. Kim, to the simply supported sandwich panels with point Mass/Masses is presented.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.151-152
• /
• 2011

This paper describes a cross-regulation characteristics of a multi-output LLC resonant converter widely used in consumer electronics. The output characteristics of the multi-output LLC converter is derived from the assumption that the current and voltage to flow through the resonant network is sinusoidal and the duty loss is investigated. The simulation results are provided to verify the theoretic results.