• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.261-266
• /
• 1991

As the ensemble averaged dz/dt signal during exercise gets smoothed, it is difficult to find the distinctive marks for estimation of stroke volume. The cross correlation function was made use of estimating these marks for automatic calculation by computer from the ensemble averaged dz/dt signal. LVET( Left Ventricular Ejection Time) and stroke volume were estimated based on the calculated parameters from the characteristic points. LVET, stroke volume calculated by hand, by the ensemble average and the cross correlation were compared for accuracy validation.

• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.539-544
• /
• 2011

적당한 정수 $n({\geq}1)$에 대하여 2-valued 자기상관관계를 갖는 주기가 $2^n-1$인 균형 이진 수열(balanced binary sequences)은 대역확산 통신 시스템(spread-spectrum communication system)에서 많이 응용되고 있다. 본 논문에서는 르장드르 수열에 의해 구성되는 새로운 3-valued 비선형 이진 수열을 제안한다. 이 수열은 유한체 위에서 트레이스를 이용해 생성하는 가장 우수한 수열인 m-수열, GMW 수열, Kasami 수열, No 수열을 모두 포함한다. 제안된 수열은 Klapper에 의해 제안된 이차형식 수열보다 더 낮은 상호상관관계를 갖는다.

• Industrial Engineering and Management Systems
• /
• 제1권1호
• /
• pp.79-86
• /
• 2002

This paper proposes a new algorithm for estimating ARMA model parameters. In estimating ARMA model parameters, several methods such as generalized least square method, instrumental variable method have been developed. Among these methods, the utilization of a bootstrap type algorithm is known as one of the effective approach for the estimation, but there are cases that it does not converge. Hence, in this paper, making use of a cross correlation function and utilizing the relation of structural a priori knowledge, a new bootstrap algorithm is developed. By introducing theoretical relations, it became possible to remove terms, which is liable to include much noise. Therefore, this leads to robust parameter estimation. It is shown by numerical examples that using this algorithm, all simulation cases converge while only half cases succeeded with the previous one. As for the calculation time, judging from the fact that we got converged solutions, our proposed method is said to be superior as a whole.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.495-513
• /
• 2020

The correlation identification of the subsurface is a novel electrical prospecting method which could suppress stochastic noise. This method is increasingly being utilized by geophysicists. It achieves the frequency response of the underground media through division of the cross spectrum of the input & output signal and the auto spectrum of the input signal. This is subject to the spectral leakage when the cross spectrum and the auto spectrum are computed from cross correlation and autocorrelation function by Discrete Fourier Transformation (DFT, "To obtain an accurate frequency response of the earth system, we propose an improved correlation identification method which uses all phase Fast Fourier Transform (APFFT) to acquire the cross spectrum and the auto spectrum. Simulation and engineering application results show that compared to existing correlation identification algorithm the new approach demonstrates more precise frequency response, especially the phase response of the system under identification.

• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.263-269
• /
• 2013

본 논문에서는 n=2m, $m=4k(k{\geq}2)$일 때 새로운 데시메이션 $d=3{\cdot}2^m-2$에 대한 상호상관함숫값을 구하는 방법을 제시하고 특별한 경우의 제안된 수열군에 속한 수열들의 선형스팬을 계산한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.172-176
• /
• 2000

A series of preliminary experiments were carried out to quantify the annoyance are noisiness caused by floor impact noise. From the results of the experiments. the heavy impact source was found to be felt louder and noisier than the light impact source. Measurements of noise were also conducted by a diagnostic system based on the model(the model consists of the autocorrelators and the cross-correlation for signals arriving at two ear entrants) of the human auditory-brain system. Physical factors in the model were calculated by use of the ACF(autocorrelation function) and IACF(interaural cross correlation function) of binaural signals. From the ACF/IACF analysis, it was found that perceived loudness of floor impact noise could be represented by the factors of the ACF/IACF model.

• 한국음향학회지
• /
• 제9권2호
• /
• pp.42-52
• /
• 1990

음향전파 측정에 상호상관법(직접법과 M계열 변조상관법)을 이용하므로서 임펄스 입력에 의한 경우와 같은 결과를 얻을 수 있다는 것과, 또 상호상관법의 특징인 외란노이즈의 영향을 줄일 수 있었던 것 등을 건축음향분야에서 측정계를 대상으로 하여 이론적으로 정리하였다. 또 이들 계측법을 응용하여 흡음재료의 사입사 흡음특성의 측정, 실의 단독 단음응답 및 잔향감쇄 과정의 측정, 음압레벨 분포, 차음성능 등을 측정하고 여러 건축음향측정에서 이들 방법이 유효하다는 것을 실험적으로 확인하였다.

• 한국군사과학기술학회지
• /
• 제13권4호
• /
• pp.673-682
• /
• 2010

This paper describes and analyzes a various generation methods of the mutually orthogonal polyphase sequences with low cross-correlation peak sidelobe and low autocorrelation peak sidelobe levels. The mutual orthogonality is the key requirement of multi-static or MIMO(Multi-Input Multi-Output) radar systems which provides the good target detection and tracking performance. The polyphase sequences, which are generated by SA(Simulated Annealing) and GA(Genetic Algorithm), have been analyzed with ACF(Autocorrelation Function) PSL(Peak Sidelobe Level) and CCF(Crosscorrelation Function) level at the matched filter output. Also, the ambiguity function has been introduced and simulated for comparing Doppler properties of each sequence. We have suggested the phase selection rule for applying multi-static or MIMO systems.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1990년도 추계학술대회
• /
• pp.99-102
• /
• 1990

Cross correlation method was newly applied for the calculation of latency of evoked otoacoustic emission. The latency was calculated from the main peak of cross correlation function, which is one of possible definition of latency. The output was also compared with those of conventional autocorrelation method. The results show that cross correlation method has better performance than that of conventional method.