• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.111-120
• /
• 2004

The interaction between poly(diallyldimethylammonium chloride) (PDADMAC) of positive charge per repeating unit and anionic surfactant, sodium dodecyl sulfate (SDS) has been investigated by light scattering, turbidimetry and fluorescence. Chain behavior of PDADMAC in 0.3 M NaCl aqueous solution seems like neutral polymer chain In good solvent. By adding SDS into PDADMAC solution, strong attractive interaction develops between them, and can be described with two kinds of critical aggregation concentration(CAC). First, at [SDS]/]DADMAC] 0.06, intramolecular critical micellization of SDS occurs inside a single polymer chain. The maximum size of SDS-polymer complex is observed just before intramolecular CAC. Above intramolecular CAC, the size of this complex starts to shrink slowly due to involvement of polymer subchain in micelle. Second, intermolecular CAC is also observed at [SDS]/[DADMAC] 0.5 by means of turbidimetry. Strong aggregation of polymer chains decorated with many micelles occurs after the second CAC, and huge aggregates have formed.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.665-671
• /
• 2013

The solubilization of p-bromophenol by the micellar system of TTAB(tetradecyltrimethylammonium bromide) and the micellization of TTAB were studied by the UV-vis spectrophotometric method simultaneously. And the effects of temperature on these properties have been measured for the thermodynamic study. The results show that the ${\Delta}G_s{^o}$ and ${\Delta}H_s{^o}$ values are negative and the ${\Delta}S_s{^o}$ values are positive for the solubilization of p-bromophenol within the measured range. On the other hand, the ${\Delta}G_m{^o}$ values are negative and the ${\Delta}H_m{^o}$ and ${\Delta}S_m{^o}$ values are positive for the micellization of TTAB. The effects of additives such as n-butanol and NaCl have been studied also for both properties and the relationship between these two properties has been also studied. From the results, we can postulate the solubilization site of p-bromophenol in the micelle.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.190-194
• /
• 2009

In this study sodium dodecyl sulfate (SDS), which was anionic surfactant, was added for forming micelles to remove iron ion that could be contained with small amount in industrial water. Then aggregates binding between iron ions and micelles were rejected by a ceramic microfiltration membrane. As result of SDS concentration effect on removal rates of iron and SDS in modified iron solution, the removal rate of iron was the highest value of 92.26% and the removal rate of SDS was 61.10% a little higher than the result of calcium ion at 8 mM which was CMC (Critical micelle concentration) of SDS. As final resistance of membrane fouling $R_f$ increased the more at the higher SDS concentration, it showed the highest value at 4 mM and the lowest at 10 mM of SDS. The final permeate flux $J_{180}$ had the highest value and the largest total permeate volume could be finally acquired at SDS 10 mM. In case of CMC 8 mM, low $R_f$ was shown as same as that of 10 mM until 80 minutes of operation, and tended to increase dramatically to 120 minutes and increase slowly again until 180 minutes.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.438-447
• /
• 2020

The critical micelle concentration (CMC) values of the mixed surfactant systems and the solubilization conatant (K_s) values of 4-ethylaniline in those solutions were measured and analyzed by the UV-Vis method. As a result, the mixed surfactant systems of TTAB/LSB and TTAB/TX-100 did not deviate significantly from ideal mixed micellization. However, the mixed systems of SDS/LSB and SDS/TX-100 showed great negative deviations from ideal mixed model. These differences showed that the intensity of the interaction between two components in the mixed micelle was different for each mixed system and that these differences greatly influenced the solubilization of 4-ethylaniline by a mixed surfactant system. Among pure surfactants, an anionic surfactant such as SDS showed a greater K_s value than other ionic surfactants, and the K_s value by each surfactant system decreased in the order of SDS≫TTAB≧LSB>TX-100. In addition, the K_s values of all the mixed surfactant systems were higher than those of the pure surfactants constituting the mixed systems.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.216-221
• /
• 1991

Surface activities of four potassium N-acyl-N-methyl-${\beta}$-alaninate including surface tension, foaming power, foam stability, emulsifying power and dispersion power were measured respectively, and critical micelle concentration(cmc) was evaluated. Consequently these anionic surfactants with long chain acyl amide showed good emusifying power of O/W type, foaming, foam stability and dispersion effect.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.109-117
• /
• 1996

Removal of metal ions on the ultrafiltration membrane with micellar-enhanced with anion surfactants is a recently developed technique which can remove heavy metals and small molecular weight ions from wastewater with simple separation process and without a phase change. Above a certain concentration, so called the critical micelle con binding cationic cobalt ions and anionic surfactants, were removed by ultrafiltration membrane. The transmembrane pressure difference had a relatively small effect on the rejection coefficient of metal ions on the ultrafiltration membrane whereas the level of anionic surfactant-to-metal ratio (S/M) had a substantial effect.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.5
• /
• pp.1135-1139
• /
• 2005

Psychrotrophic phenanthrene-degrading bacteria were identified in the sediment samples collected from Lake Baikal, Russia. Among 70 phenanthrene-degrading isolates, the seven that had the highest phenanthrene-degradation rates were identified by 16S rDNA sequencing. Isolate P25, identified as the Gram-positive rod-shaped organism Rhodococcus erythropolis, had the highest growth and degradation rate at $15^{\circ}C$. It could remove $26.0\%$ of 100 mg $1^{-1}$ phenanthrene in 20 days at $15^{\circ}C$, and degradation was less at $5^{\circ}C\;and\;25^{\circ}C$. The addition of surfactants to enhance degradation was tested. Brij 30 and Triton X-100 inhibited degradation at all surfactant concentrations tested, but Tween 80 stimulated phenanthrene degradation, especially at low concentrations. When $20{\times}$ CMC (critical micelle concentration) of Tween 80 was added, $38.0\%$ of 100 mg $1^{-1}$ phenanthrene was degraded in 12 days at $15^{\circ}C$. This psychrotrophic phenanthrene-degrading bacterium is a candidate for use in bioremediation of polycyclic hydrocarbon contamination in low temperature environments.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1135-1140
• /
• 2007

Pseudo-first-order rate constants (kobs) for the reaction of N-benzylphthalimide (NBPT) with HO- have been determined at 2.0 × 10?4 M NBPT, 1.0 × 10?3 and 2.0 × 10?3 M NaOH as well as varying concentrations of cetyltrimethylammonium bromide ([CTABr]T = 0.0-1.7 × 10?1 M). The effects of [CTABr]T ? CMC (with CMC representing the critical micelle concentration of CTABr) on kobs have been analyzed in terms of Berezin's pseudophase (BPP) model and pseudophase ion-exchange (PIE) model. Although both models give the best observed data fit with least-squares values not significantly different from each other, the calculated values of KS from BPP model appear to be more reliable compared to those from PIE model because the values of KS from BPP model are similar to the corresponding KS values determined spectrophotometrically.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.737-741
• /
• 1999

Phenanthrene degrading bacteria were isolated from the petroleum contaminated soil near an oil tank. Four of 15 strains decreased surface tension of culture broth of phenanthrene-containing minimal media. H6, one of the isolated bacteria decreased surface tension of culture broth below 33 dyne/cm during growth on glucose. H6 was identified as Bacillus subtilis and biosurfactant produced by H6 was lipopeptide. The biosurfactant was produced at 0.13 g/L in the mineral medium containing 2% glucose. Critical micelle concentration(CMC) of the biosurfactant was 52 mg/L. Foaming power was similar to Tween 80 and dispersing power was superior to Tween 80m SDS and Brij30. High thermal stability and emulsion index were also observed.