• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.39-44
• /
• 2006

Before applying HTS power cable to the real utility. system analysis should be carried out by some simulation tools . Hereby the electrical power system analysis is very important for practical use of HTS devices. Nowadays PSCAD/EMTDC simulation tool is one of the most popular and useful analysis tool for the electrical power system analysis. Unfortunately the model component for HTS power cable is not provided in the PSCAD/EMTDC simulation tool In this paper. the EMTDC model component for HTS power cable has been developed considering critical current, critical temperature and recovery time constant that depend on the sorts of HTS wire. The numerical model of HTS Power cable in PSCAD/EMTDC was designed by using the real experimented data obtained from the real HTS 1G wire test. The utility application analysis of HTS power cable was also performed using the developed model component and the parameters of the real utility network in this study. The author's got good results. The developed model component for HTS power cable could be variously used when the power system includes HTS power cable, especially it will be readily analyzed by PSCAD/EMTDC in order to obtain the data for the level of fault current power flow, and power losses, and so on.

• 폴리머
• /
• 제28권1호
• /
• pp.59-66
• /
• 2004

온도에 의존하여 졸-젤 전이를 나타내는 온도민감성 리포솜을 함유하는 폴리 N-이소프로필아크릴아마이드 젤을 제조하였다. 온도민감성 리포솜의 표면은 3$0^{\circ}C$에서 하한임계용액온도를 나타내는 N-이소프로필아크릴아마이드와 옥타데실아크릴레이트의 공중합체를 이용하여 변형시켰다. 표면이 변형된 온도민감성 리포솜을 폴리 N-이소프로필아크릴아마이드 수용액에 혼합하였다. 혼합용액을 하한임계용액온도 이상으로 가열했을 때 물리적으로 가교결합이 이루어진 젤의 형태가 이루어지며, 이때 온도 민감성 리포솜이 함유된 폴리 N-이소프로필아크릴아마이드 젤이 만들어진다. 온도민감성 리포솜으로부터 약물의 방출은 형광강도를 측정하여 결정하였다. 폴리 N-이소프로필아크릴아마이드 젤 내부의 온도민감성 리포솜으로부터 약물의 방출은 온도가 증가할수록 지속적인 방출을 나타내었다.

• 센서학회지
• /
• 제18권1호
• /
• pp.28-32
• /
• 2009

Most portable mobile devices employ rechargeable lithium-ion batteries. This lithium-ion battery usually suffers from the possibility of explosion due to heat generation from surrounding atmosphere or internal deficiency during charging or at overuse. To solve these problems, most rechargeable batteries have a built-in protection circuit module (PCM). The resistance of a properly processed $VO_2$ critical temperature sensor (CTS) is changed dramatically at a critical temperature of around $68^{\circ}C$, which can replace some bi-metal, NTC, or PTC sensors embedded in PCM. Such $VO_2$ CTS consumes a very small current at the level of natural discharge. Experimental results showed that this CTS could be applied to a PCM as the PCM could protect the battery while keeping its power consumption at minimum.

• 한국식품위생안전성학회지
• /
• 제11권3호
• /
• pp.177-187
• /
• 1996

Time-temperature relationship and microbiological quality were assessed and critical control points were identified through hazard analysis during the phases of production in two different packaged meals (Dosirak) manufacturing establishments (A, B:Kim Pab). Microbiological tests on foods, equipments and utensils were done according to standard procedures and included total plate count, coliforms and fecal coliforms. The results of the study are summarized as follows : time-temperature control management was needed because time-temperature abuse more than 8 hours at dangerous temperature zone (5-6$0^{\circ}C$) was observed from pre-preperation to distribution phase; Poor sanitary practices of employees were observed in hand washing and using disposable gloves; Microbiological analysis results of equirpments and utensils showed possible cross-contamination risks when foods were contacted with them; Kim Pab needed thorough quality control because it included various mixed ingredients of cooked and uncooked and had many apportunities of cross-contamination either by equipments or hands through whole production processes.

• 한국주조공학회지
• /
• 제11권1호
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.

• 공업화학
• /
• 제17권5호
• /
• pp.443-450
• /
• 2006

마이셀은 여러 방면에서 폭넓게 활용되고 있다. 그러므로 마이셀이 처음으로 형성되는 농도인 임계 마이셀 농도(임마농, CMC)가 온도에 따라 어떻게 달라지는지 이해하는 것이 중요하다. 이제까지 셀 수 없이 많은 논문에서 임마농의 온도 의존성을 온도의 다항식으로 나타내어 사용하였다. 본 논문에서는 이의 부당함을 밝혔으며, 열역학적 사실과 실험 관찰 결과에 근거하여 임마농의 온도 함수를 새롭게 구하였다. 그리고 여기에서 더 나아가 새로운 식을 이용하여 임마농의 온도에 대한 지수 법칙을 구하였다. 이 식들을 임마농 자료에 맞춤으로써 이들의 정확도를 조사하였는데, 매우 정확한 것으로 판명되었으며, 특히 지수 법칙에서 지수가 계면활성제에 관계없이 2로 나타나서 모든 계면활성제에 사용될 수 있는 식으로 평가되었다.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.56-67
• /
• 1989

In this study, the possibility of evaluating the peculiar fracture strength of weldment in high strength steels was investigated by means of a small punch(SP) test. In order to obtain the ductile-brittle transition temperature(DBTT) of SP energy by which the fracture strength of weldment in structural steels such as SS41 and SM53B steels had been evaluated in our preceding publication, the effects of notches and loading rates on SP energy were discussed. It was found that the correspondence of SP energy to critical COD at test temperature -196.deg. C showed a linear relation with some deviation. The empirical correlation with scatter band, Esp/(Esp)p = 1.67[.delta./(.delta./sub c//(.delta./sub c/)/sub p/]-0.55, was developed between the SP energy ratio and critical COD ratio of each weld structure compared with parent material at test temperature -196.deg. C. In addition, there did not appear to be a significant effect of test materials and specimen size etc. on the correlation.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.135-138
• /
• 2015

A new correlation predicting the idealized critical mass-flow rates of water for subcooled and saturated liquid water including two-phase water flow was developed for a wide range of upstream stagnation pressures (e.g., 0.5-20.0 MPa). A choking correction factor dependent on the upstream stagnation pressure and subcooled temperature was introduced into a new correlation, and its values were suggested to satisfy the idealized nozzle data within 10% error ranges. The suggested correlation will be instructive and helpful for related studies and/or engineering works.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권4호
• /
• pp.580-597
• /
• 2013

Three materials SUS304, 9% Ni steel and Al 5083-O alloy, which are considered possible candidate for International Maritime Organization (IMO) type B Cargo Containment System, were studied. Monotonic tensile, fatigue, fatigue crack growth rate and Crack Tip Opening Displacement tests were carried out at room, intermediate low ($-100^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures. The initial yield and tensile strengths of all materials tended to increase with decreasing temperature, whereas the change in elastic modulus was not as remarkable. The largest and smallest improvement ratio of the initial yield strengths due to a temperature reduction were observed in the SUS304 and Al 5083-O alloy, respectively. The fatigue strengths of the three materials increased with decreasing temperature. The largest increase in fatigue strength was observed in the Al 5083-O alloy, whereas the 9% Ni steel sample showed the smallest increase. In the fatigue crack growth rate test, SUS304 and Al 5083-O alloy showed a decrease in the crack propagation rate, due to decrease in temperature, but no visible improvement in da/dN was observed in the case of 9% Ni steel. In the Crack Tip Opening Displacement (CTOD) test, CTOD values were converted to critical crack length for the comparison with different thickness specimens. The critical crack length tended to decrease in the case of SUS304 and increase for the Al 5083-O alloy with decreasing temperature. In case of 9% Ni steel, change of critical crack length was not observed due to temperature decrease. In addition, the changing material properties according to the temperature of the LNG tank were analyzed according to the international code for the construction and equipment of ships carrying liquefied gases in bulk (IGC code) and the rules of classifications.

• 대한지리학회지
• /
• 제39권1호
• /
• pp.13-26
• /
• 2004

본 연구는 상대적 날씨 스트레스 지수로 NET의 적용 가능성을 파악하고자 하였다. 기상청에서 예보하고 있는 기온, 습도, 바람 자료를 이용하여 NET 값의 시공간적 분포 특성을 분석하였다. 여름철 스트레스 지수인 일 최고 NET의 지역별 스트레스 기준값은 바람과 습도보다는 기온의 영향을 받으므로 일 최고 기온의 분포와 유사하다. 겨울철 스트레스 지수인 일 최저 NET의 스트레스 기준값은 산지 지역과 서울 이북 지역에서는 낮은 기온의 영향을. 해안 지역에서는 강한 바람의 영향으로 기준값이 여름철에 비하여 다양하게 나타난다. 스트레스가 강한 날의 발생 빈도는 여름철은 뚜렷한 연변화가 나타나지 않지만, 겨울철에는 1990년대 중반 이후 뚜렷한 증가 경향을 보인다.