• 제목/요약/키워드: Crest factor

검색결과 114건 처리시간 0.024초

CDTP 기법을 이용한 BLDC 전동기의 토크맥동 저감에 관한 연구 (A Study on Reduction of Torque Pulsating for BLDCM Using CDTP Control Method)

  • 강병희;신우석
    • 전력전자학회논문지
    • /
    • 제11권2호
    • /
    • pp.113-119
    • /
    • 2006
  • 본 논문은 CTDP 기법을 이용한 다양한 역기전력을 갖는 BLDCM(Brushless DC Motor)의 토크특성에 대하여 연구하였다. 상전환 및 상전환 시점에 의한 토크맥동을 개선하기 위한 CDTP 기법을 제안하였다. 이를 위하여 Hague의 해석방법에 따른 실제 역기전력을 갖는 BLDCM의 제어에 적용하였으며 이때 실제 역기전력은 착자의 가장자리 지수와 평탄구간에 의해 발생된다. 이의 검증을 위하여 시뮬레이션 및 실험을 통하여 제안한 방식을 이용한 토크맥동 저감방법의 타당성을 살펴보았다.

실험적 방법을 이용한 자동차 부품의 고장신호 분석, Part 1 - 엔진의 이상 신호 분석 위주 (Fault Signal Analysis of the Automotive Components using Experimental Method, Part 1 - Consideration of the Engine Signals)

  • 박상길;박원식;이해진;홍우경;오재응
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.238-242
    • /
    • 2007
  • 자동차의 고장은 그 종류나 특징면에서 다양하게 나타나게 되므로 자동차의 진단과 점검에는 많은 노동력과 비용, 시간이 소요되며 운전자에 의한 정보를 기대하기 힘든 경우에는 진단이나 정비과정에 많은 어려움을 겪게 된다. 따라서 본 연구에서는 운전자에 의한 일반적인 정보와 진동 소음센서에 의한 정보의 신호처리기술을 종합하여 자동차 부품의 이상 신호 분석을 하였다. 그리고 정상 상태 대비 이상 신호에 따른 진동 소음 데이터 변화율을 계산하여 작동 모드 별 실내음압에 영향을 미치는 신호 및 해당 주파수 특성을 분석하였다. 이에 따라 자동차 정비 전문가 시스템 구축을 위한 기초 연구로 엔진부의 이상 신호와 각 부품 별 이상 신호로 나누어 분석하여 데이터 처리 과정 및 이상 증상 별 경향 파악에 본 연구의 목적을 둔다.

  • PDF

실험적 방법을 이용한 자동차 부품의 고장신호 분석, Part 2. 부품별 이상 신호 분석 (Fault Signal Analysis of the Automotive Components using Experimental Method, Part 2 - Consideration of the Component Signals)

  • 이해진;박원식;이유엽;오재응
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.243-246
    • /
    • 2007
  • 자동차의 고장은 그 종류나 특징 면에서 다양하게 나타나게 되므로 자동차의 진단과 점검에는 많은 노력과 비용, 시간이 소요되며 운전자에 의한 정보를 기대하기 힘든 경우에는 진단이나 정비과정에 많은 어려움을 겪게 된다. 따라서 본 연구에서는 운전자에 의한 일반적인 정보와 진동 소음 센서에 의한 정보의 신호처리기술을 종합하여 자동차 부품의 이상 신호 분석을 하였다. 그리고 정상 상태 대비 이상 신호에 따른 진동 소음 데이터 변화율을 계산하여 작동 모드 별 실내 음압에 영향을 미치는 신호 및 해당 주파수 특성을 분석하였다. 이에 따라 자동차 정비 전문가 시스템 구축을 위한 기초 연구로 엔진부의 이상 신호와 각 부품 별 이상 신호로 나누어 분석하여 데이터 처리 과정 및 이상 증상 별 경향 파악에 본 연구의 목적을 둔다.

  • PDF

전기수술기 성능시험용 True RMS 측정에 관한 연구 (A Study on the True RMS Measurement of Electrical Unit for Performance Test)

  • 고한우;배문섭;최덕희
    • 대한의용생체공학회:의공학회지
    • /
    • 제12권4호
    • /
    • pp.309-314
    • /
    • 1991
  • This paper describes the results of study on the measurement method of TRMS (true root mean square value) In electrosurgical unit. We used three type (direct computing type, indirect computing type, thermal converting type) in the measurement of TRMS. Three types of measurement method were compared with respect to power level, frequencey and crest factor in addition to environmental temperature. In three of them, the thermal converting type was the best for th electrosurgical unit analyzer

  • PDF

MTS 기법을 이용한 회전기기의 이상진단 (A Fault Diagnosis on the Rotating Machinery Using MTS)

  • 박상길;박원식;이유엽;김동섭;오재응
    • 한국소음진동공학회논문집
    • /
    • 제18권6호
    • /
    • pp.619-623
    • /
    • 2008
  • As higher reliability and accuracy on production facilities are required to detect incipient faults, a diagnostic system for predictive maintenance of the facility is highly recommended. In this paper, it presents a study on the application of vibration signals to diagnose faults for a rotating machinery using the Mahalanobis distance-Taguchi system. RMS, crest factor and Kurtosis that is known as the statistical methods and the spectrum analysis are used to diagnose faults as parameters of Mahalanobis distance.

콘크리트표면차수벽령 석괴댐의 지진응답해석 (Seismic Response Analysis of the Concrete Face Rockfill Dam)

  • 오병현;임정열;이종옥
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
    • /
    • pp.147-154
    • /
    • 2001
  • In this study, comprehensive seismic performance analysis were performed for the concrete face rockfill dam(CFRD) designed seismic coefficient method(0. 10g). The static and pseudo-static FEM analysis, limited equilibrium method and dynamic FEM analysis were used for the dam safety analysis. The results of the seismic analysis were that the minimum factor of safety of down slope was 1.2 and horizontal displacement increased 8cm and vertical displacement increased 1.2cm at dam crest rather than those of static condition. The model dam did not show any serious tai lure in seismic stabi1ity for 0.13g. And much more research is still necessary in seismic safety of CFRD.

  • PDF

복합댐의 등가정적해석에 의한 안정성 평가 (The Stability Evaluation for Pseudo-Static Analysis of Composite Dam)

  • 오병현;임정열;이종욱
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 추계 학술발표회 논문집
    • /
    • pp.205-212
    • /
    • 2002
  • It was performed that the stability evaluation using pseudo-static method and modified pseudo-static method for rockfill and rockfill-concrete section of composite dam. As a results of pseudo-static and modified pseudo-static analysis using seismic coefficient 0.154g, the maximum displacement at dam crest was occurred about 14~18cm on rockfill section and about 5~9cm on rockfill-concrete section, respectively. Also, that the factor of safety of down slope was more than 1.0~1.5. the rockfill and rockfill-concrete section of composite dam did not show any stability problems for 0.154g. Further research is still necessary in seismic safety of composite dam.

  • PDF

북미 6속 자동변속기 공장 EOL NVH 시스템 개발에 대한 연구 (A Development of the Noise Quality Checking System EOL of the 6th Speed Automatic Transmission in the USA)

  • 이현구;김무석;황선양;강구태;이태휘
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2011년도 춘계학술대회 논문집
    • /
    • pp.731-732
    • /
    • 2011
  • This paper shows a whole noise quality checking system for the new developed 6th speed automatic transmission manufactured in USA. Due to demand for manufacturing of the high NVH quality transmissions in the mass product line, some special checking system called EOL is adapted. This EOL system is using vibration analysis technologies. Through adapting vibration analysis technologies and functions likewise RMS, Crest Factor, Harmonics, Peak, Band, and Order tracking, various noise problems caused by wear, nick, and deformations could be successfully detected and predicted. Therefore, automatic transmissions manufactured in the USA could get high NVH quality.

  • PDF

Expression of the Novel Basic Helix-Loop-Helix Gene dHAND in Neural Crest Derivatives and Extraembryonic Membranes during Mouse Development

  • S.I Yun;Kim, S.K;Kim, S.K.;K.T Chang;B.H Hyun;D.S Son;Kim, M.K;D.S Suh
    • 한국동물번식학회:학술대회논문집
    • /
    • 한국동물번식학회 2001년도 발생공학 국제심포지움 및 학술대회 발표자료집
    • /
    • pp.53-54
    • /
    • 2001
  • Expression of HAND genes in sympathetic adrenal lineage suggests that HAND genes may regulate Mash-I independent neuronal genes. HAND genes are also expressed in other cell types, e.g. Cardiac cells, trophoblasts, and decidua, suggesting that HAND genes are not cell fate determination factors. It is unclear how HAND genes function specifically in different types of cells. Combinational actions of HANDs with other cell-lineage specific transcription factor may determine each cell fate and differentiation processes. Identifying the transcription target genes of HANDs and Mash-I will be important to elucidate the function of these bHLH factors in SNS factors in SNS development. (omitted)

  • PDF

PERIODIC SURFACE HOMEOMORPHISMS AND CONTACT STRUCTURES

  • Dheeraj Kulkarni;Kashyap Rajeevsarathy;Kuldeep Saha
    • 대한수학회지
    • /
    • 제61권1호
    • /
    • pp.1-28
    • /
    • 2024
  • In this article, we associate a contact structure to the conjugacy class of a periodic surface homeomorphism, encoded by a combinatorial tuple of integers called a marked data set. In particular, we prove that infinite families of these data sets give rise to Stein fillable contact structures with associated monodromies that do not factor into products to positive Dehn twists. In addition to the above, we give explicit constructions of symplectic fillings for rational open books analogous to Mori's construction for honest open books. We also prove a sufficient condition for the Stein fillability of rational open books analogous to the positivity of monodromy for honest open books due to Giroux and Loi-Piergallini.