• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.485-495
• /
• 2023

The pixel size in high-resolution complementary metal-oxide-semiconductor (CMOS) image sensors continues to shrink due to chip size limitations. However, the pixel pitch's miniaturization causes deterioration of optical performance. As one solution, a quad color filter (CF) array with pixel binning has been developed to enhance sensitivity. For high sensitivity, the microlens structure also needs to be optimized as the CF arrays change. In this paper, the covered microlens, which consist of four microlenses covered by one large microlens, are proposed for the quad CF array in the backside illumination pixel structure. To evaluate the optical performance, the suggested microlens structure was simulated from 0.5 ㎛ to 1.0 ㎛ pixels at the center and edge of the sensors. Moreover, all pixel structures were compared with and without in-pixel deep trench isolation (DTI), which works to distribute incident light uniformly into each photodiode. The suggested structure was evaluated with an optical simulation using the finite-difference time-domain method for numerical analysis of the optical characteristics. Compared to the conventional microlens, the suggested microlens show 29.1% and 33.9% maximum enhancement of sensitivity at the center and edge of the sensor, respectively. Therefore, the covered microlens demonstrated the highly sensitive image sensor with a quad CF array.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.109-112
• /
• 2002

So far, the closed-form Green's functions have been derived almost for th open microstrip structures. In the present study, closed-form Green's functions for a top-covered microstrip structure are derived. And an effect of top-cover is discussed in comparison with open structure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.1
• /
• pp.41-51
• /
• 1990

This study was executed to investigate the vegetation structure and to propose the vegetation management proposals of the Sansung Nature Park at Cheonju City and the results were as fellows. 1. A damage of vegetation and soil surface around the Namgosa was taken place up to 100m by picnic 2. Pinus rigida forest covered 36.1% of the total area(152.6ha) and total afforested vegetation covered 43.5%, respectively. P. denstflora comm. covered 28.4% arid Carpinus laxiflora Comm. as a climax vegetation in temerate zone covered 0.3%, respectively. 3. 6, 7 and 8 of the degree of human disturbance of vegetation covered 45.3%, 26.6% and 21.4%, respectively and resulted in low quality of naturalness. 4. Physical and chemical properties of soil were pour at high elevation and were poor severely in and around the Namgosa due to human disturbance. 5. Plant community were under rapid succession and had unvalanced structure and heterogeneous composition of species. Rapid vegetational succession from Pinus densiflora and Pf. rigida to Carpinus laxifora, Quercus spp. and Robinina pseudo-acacia were taken place.6. The speeies of Raunkiaer's frequency class I as of high frequency class were Pinus dunsiflora, Carpinus alxiflora, Quercus mmongolica, Sorbus alnifolia, Prunrs sargintii, Rhododendron yedoense, Stephanandra incisa and Lespedeza maxinowiczii. 7. Vegetational management proposals were made for three vegetation zones ; Historic landscape restoration and preservation zone, Afforested vegetation zone, Native vegetation conservation zone and recommanded native species for landcape planting.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.20 no.4
• /
• pp.1-11
• /
• 1993

This study was conducted to investigate the plant community structure and to propose ecological management planning for the urban forest on Sungdongku, Joongku and Yongsanku in Seoul. Field survey was excuted October 1991 and the results were as follows. Robinia pseudoacasia community covered 61.1% and Populus x albaglandulosa covered 3.8% of survey site II and survey site was covered by the deciduous-broad leaf mixtured forest. According to the human impact and inappropriate management impact, survey area was divided into five forest community. As for the analysis of plant community structure which was classified into five forest community, the importance values, ecological diversity, number of species, number of individuals, basal area and crown coverage of the native plant community showed relatively higher than community that vegetation deterioration degree by the human impact showed seriously. In landscape forest of Mt. Daehyun, it showed problems for the planting method and the soil condition. So it was proposed to management guide, vegetation restoration and soil management through ecological management planning based on above results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.67-70
• /
• 1996

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed the three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. The main effect of deformation at the coner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stress in the oxide. In the island structure which is the structure mostly covered with nitride and a coner is opened to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opened to oxide and a coner is covered with nitride, however, oxidation is increased at the coner by tensile stress.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.56-61
• /
• 2000

This study has been performed for mechanical properties of underwater wet welding electrode with rolled steel (KR-RA) for ship structure, one kind (E 4313) of domestic covered arc welding electrode used in the air and two kinds (UWE-01, UWE-02) of underwater covered arc welding electrode experimentally developed on the same welding condition. The results obtained were as follows : The hardness value of underwater covered arc welding electrode (UWE-01) was about 8.3% lower than domestic covered arc welding electrode(E 4313) in heat affected zone of test of UWF-02 was lower about 4.5%. Tensile strengths of UWE-01 were about 0.9%, and those of UWE-02 were about 6.5% higher than those of domestic covered arc welding electrodes (E 4313) in test specimens. The impect value of UWE-01 were about 15.5%, and those of UWE-02 were about 21.7% highter than those of domestic covered arc welding electrodes(E 4313) in test specimens. So mechanical properties of the underwater arc welding electrode were improved by the composition ratios of covering materials.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2247-2254
• /
• 2010

The surface structures of copper phthalocyanine (CuPc) thin films deposited on sulphur-passivated and plane perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA)-covered InAs(100) surfaces have been studied by low energy electron diffraction (LEED) and van der Waals (vdW) intermolecular interaction energy calculations. The annealing to $300^{\circ}C$ and $450^{\circ}C$ of $(NH_4)_2S_x$-treated InAs(100) substrates produces a ($1{\times}1$) and ($2{\times}1$) S-passivated surface respectively. The CuPc deposition onto the PTCDA-covered InAs(100) surface leads to a ring-like diffraction pattern, indicating that the 2D ordered overlayer exists and the structure is dominantly determined by the intermolecular interactions rather than substrate-molecule interactions. However, no ordered LEED patterns were observed for the CuPc on S-passivated InAs(100) surface. The intermolecular interaction energy calculations have been carried out to rationalise this structural difference. In the case of CuPc unit cells on PTCDA layer, the planar layered CuPc structure is more stable than the $\alpha$-herringbone structure, consistent with the experimental LEED results. For CuPc unit cells on a S-($1{\times}1$) layer, however, the $\alpha$-herringbone structure is more stable than the planar layered structure, consistent with the absence of diffraction pattern. The results show that the lattice structure during the initial stages of thin film growth is influenced strongly by the intermolecular interactions at the interface.

• The Korean Journal of Ecology
• /
• v.21 no.3
• /
• pp.243-249
• /
• 1998

Radicoid structure of herbaceous communities in Mt. Kumbyung, Chunchon, Kangwon-Do was clarified emphasizing on the dominance of clonal plants in relation to vegetation development. In the total vegetation, 46% species identified were rhizomatous, 26% were species with tap roots, and 13% were stoloniferous species. Thus, all clonal species, including plants with bulb, corm and tuber, covered 62.8% of the total species. in the understory of Quercus, Pinus and Larix forests, 68.2% were clonal, which means 5% more compare to total vegetaion. Dominance of clonal plants became more conspicuous as their importance value was calculated. That is, they covered average 86% for the following three communities: 85% in Quercus, 95% in Pinus, and 76% in Larix, Especially, the rhizomatous plants were remarkable. Overall, clonal species dominated over the other radicoid types in terms of not only the number of species, but also the importance value. Dominance of these species was more peculiar in understory of forests, indicating the occupancy of clonal plants was related to the vegetation development.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.3
• /
• pp.35-47
• /
• 1990

This study was executed to analyze the vegetational landscape structure and administration planning of Heonin Royal Tomb forest by three kinds of ordination techniques (PCA, RA and DCA) and comparison of the couple photographs between 1920s and 1980s. Seventeen sites in the recreation area and fifteen sites in the protective area were sampled with clumped sampling method in June 1988 and five quadrats were examined in each site. Environmental impact grade 3, 4 and 5 area covered 56.4% of the surveyed area and these area should be restored by the input of human energy. Pinus densifora community of actual vegetation covered 8.4%, Alnus japonica 24.2% and Quercus community 40.9% of the total area. And the afforested vegetation of Pinus koraiensis and Pinus rigida covered 23.1 % The recreation area was divided by P. densiflora, P. densiflora-Quercus aliena, A. japonica-Q.aliena, A. japonica and the protective area by Q. acutissima, Q. aliena, A. japonica-Q. aliena.. DCA ordination showed that successional trends of tree species seem to be from P. densiflora, Sorbus alnifolia, Styrax obassia to Q. variabilis Q. serrata in P. densiflora community and from A. japonica through A. ginnala to Q. aliena in A. japonica community of the upper layer. By the comparison of the couple photographs between 1920s and 1980s, we can recognize the change of historical landscape composed of P. densiflora community and those community is succeeded to Q. aliena.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.845-852
• /
• 2015

The runup height is an important design parameter to determine the crest elevation of coastal structures and seawalls. In this study, two dimensional wave runup tests for rubble-mound structure covered by tetrapods were conducted. Incident waves at the toe include nonbreaking, breaking and broken random wave conditions. A empirical formula to predict runup elevation of rubble-mound structure with 1:1.5 front slope was proposed on the basis of physical model test results using a surf similarity parameter. The test results from this study were compared with those from van der Meer and Stam(1992).