• 한국과학교육학회지
• /
• 제13권2호
• /
• pp.146-151
• /
• 1993

This study analyzed the problem associated with inquiry centered science education and formulated some improvement Strategies for inquiry learning in the standard Korean high school course. In order to attain the goals of questionaire survey methods were used. To examine the current status of biology education, seperate questionaires were developed through an educational research and development procedure used for tearchers and student. The questionaires were developed to ask about instruction and evaluation methods, the level of inquiry learing and abstacles to it. Here are some of our results: 1) Biology instruction and learning is more knowledge-orinted than inquiry-orinted, 2) Inquiry approach in science teaching is hard to be applied because of crowed classroom conditions. 3) The material is too broad in range and too difficult in content. There is virtually nothing that can be related to everyday life. The material focusing on inquiry activities is unsatisfactorily selected and organized. 4) Effective methods of inquiry-based instruction and evaluation are not available. 5) Biology teachers are burdened with too many class hour a week and too many varieties of additional works. 6) 91.1% of biology teachers and 90.3% of students recognize that lab and field works are needed to enhance inquiry learning. However, in reality, such inquiry activities are lacking. 7) 73.3% of schools have no lab assistants. 8) The university entrance examination is the greatest factor against inquiry learning. 9) There are very few chances of in-service education for biology teachers to learn more about biology curriculum and science education theory.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.78-84
• /
• 2012

금형의 공정 과정에서 금형과 성형품 사이에서 발생하는 마찰로 인해 발생하는 금형의 마모가공차로 작용하여 성형 품질을 저하시킬 수 있다. 따라서 금형의 내마모성을 향상시키기 위해 질화나 침탄처리, 화염 및 고주파 표면처리 등의 방법들이 적용되어 왔다. 하지만 형상의 제한이나 제품의 변형 등과 같은 문제점을 수반하고 있기 때문에, 이러한 문제점을 해결할 수 있는 표면처리 방법으로써 레이저 표면처리 기술이 검토되고 있다. 따라서 본 연구에서는 고출력 다이오드 레이저를 이용, 금형재료용 주철의 표면처리를 시도하였다. 앞서 제1보와 제2보의 논문에서는 금형의 재료 및 형상의 차이에 따른 열처리 특성을 비교하였다면, 본 논문에서는 열처리 후 생성되는 경화부, 경계부위 및 모재의 조직적 차이를 분석하기 위해 광학 현미경 및 전자 현미경을 이용하여 미세조직을 관찰하고, EDS를 통해 조직의 상태를 파악하였다. 미세조직 관찰 결과, 경화부는 침상의 마르텐사이트 조직이 형성되어 있었다.

• 한국제4기학회지
• /
• 제3권1호
• /
• pp.35-45
• /
• 1989

한국과 서부 유럽의 사질층에 발달해 있는 $B_t$ band의 성인은 퇴적학적인 현상과는 무관하다. 그렇다고 토양학적인 사고만으로도 설명될 수 없다. 본 연구 결과 $B_t$ band는 사질층이 형성된 후 시기를 달리하여 다음과 같이 두 부류의 물질이 서로 다른 메카니즘에 의해 이동.집적되어 형성되었다. 1)먼저 silt중심의 heterometric fine grains과 운모류들이 결빙과 관련된 cryophoresis에 의해 이동되어 이들이 사질층 단면에서 밴드 형태로 집적되었고 2)다음에 철분을 함유한 점토가 토양수에 의해 이미 형성된 맨드에 집적되어 결국 적색의 $B_t$ band가 형성되었다. 이 두 과정에서 전자는 토양의 결빙이 지표에서 3m 정도 이상까지 진전될 정도로 한랭하고 습윤한 환경과, 후자는 podzolization이 진행되는 정도의 냉량.습윤한 환경과 관련된다. 오늘날 갈색토화작용(brunification)이 진전되는 우리나라와 서부 유럽의 경우, $B_t$ band의 polygenetic한 성인과 관련된 한랭.습윤한 환경들은 제4기 근자(주로 Wurm빙기 이래)의 고환경으로 추정된다.

• Archives of Plastic Surgery
• /
• 제35권2호
• /
• pp.121-126
• /
• 2008

Purpose: Poly-N-acetyl glucosamine(PGlcNAc) nanofiber-based materials, produced by a marine microalga, have been characterized as effective hemostatic and angiogenic agents. The similarity between PGlcNAc patch and the natural extracellular matrix allows it to support new healthy tissue growth in an injured area and to encourage fluid absorption. In this study, we hypothesized that a poly-N-acetyl glucosamine fiber patch(PGlcNAc patch) may enhance wound healing in the db/db mouse. Methods: PGlcNAc patches were applied on one square centimeter, full-thickness, skin wounds in the db/db mouse model. Wounds(n=15 per group) were dressed with a PGlcNAc nanofiber patch for 1 hour(1 h), 24 hours(24 h) or left untreated(NT). After the application time, patches were removed and wounds were allowed to heal spontaneously. The rate of wound closure was evaluated by digital analysis of unclosed wound area in course of time. At day 10, wounds(n=7 per group) were harvested and quantified with immunohistochemical markers of proliferation(Ki-67) and vascularization (platelet endothelial cell adhesion molecule, PECAM-1). Results: Wounds dressed with PGlcNAc patches for 1 hour closed faster than control wounds, reaching 90% closure in 16.6 days, nine days faster than untreated wounds. Granulation tissue showed higher levels of proliferation and vascularization following 1 h treatment than the 24 h and NT groups. In addition to its hemostatic properties, the PGlcNAc material also appears to accelerate wound closure in healing-impaired genetically diabetic mice. Conclusion: This material, with its combination of hemostatic and wound healing properties, has the potential to be effective agent for the treatment of complicated wounds.

• 한국도로학회논문집
• /
• 제3권2호
• /
• pp.103-112
• /
• 2001

본 연구는 재생골재를 도로의 보조기층재료 및 포장용 콘크리트 골재로 사용하기 위하여 수행되었다. 우선 보조기층재료로서의 활용성 여부를 파악하기 위하여 실내다짐시험, CBR 시험, 평판재하시험을 수행하였으며, 콘크리트용 골재로의 활용성을 보기 위하여 재생골재 첨가비율을 0, 20, 40, 60, 80%로 하여 설계기준강도 $280kgf/cm^2$인 표층용 콘크리트를 제조하였다. 제조된 콘크리트로 굳지 않은 콘크리트 성질과 28일 양생 후 강도시험과 동결 융해에 따른 내구성 시험을 통해 폐콘크리트 재생골재의 활용성을 도로포장재료 측면에서 검토하였다. 실험결과 재생골재는 보조기층재료로서의 사용이 충분히 가능하며 표층용 콘크리트 골재로서 재생골재 첨가비율 40%까지 활용이 가능함을 알 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• 공학교육연구
• /
• 제10권4호
• /
• pp.29-42
• /
• 2007

공학교육인증에 있어서 프로그램학습성과는 공학교육의 질적 향상 정도를 판가름하는 중요한 기준이며 가장 핵심이 되는 부분이다. 한국공학교육인증원은 프로그램학습성과를 공과대학 졸업생들이 졸업과 동시에 반드시 지녀야 하는 핵심 역량 12가지로 규정하고 있으며 인증을 받고자 하는 모든 공학교육프로그램은 전공 관련 지식을 포함하여 이를 달성하기 위한 교육과정을 구축하고 달성 및 지속적인 개선을 하고 있는지의 여부를 보이기를 요구하고 있다. 여기서 프로그램학습성과는 크게 두 가지를 만족시켜야만 하는데첫째, 공학프로그램은 졸업생이 12가지 능력과 자질에 대해 달성하고 졸업함을 보장할 것에 대한 요구와 둘째, 12가지 능력 및 자질을 교육시키는 프로그램의 교육 수준의 지속적인 개선이다. 따라서 본 연구의 목적은 이러한 한국공학교육인증원의 취지에 맞는 평가를 실시하기 위해 프로그램학습성과 평가의 CQI와 QC를 실현을 위해 갖추어야 할 체계인 구축 모형을 소개하고 한국공학교육인증원의 기준에 알맞은 실천전략을 제시하고자 한다.

• 공학교육연구
• /
• 제10권1호
• /
• pp.97-108
• /
• 2007

프로그램학습성과 평가도구로서의 졸업논문은 4년 동안 습득한 공학의 기초지식을 보다 체계적으로 이해하고 응용하는 능력과 논문 작성을 통하여 공학적인 논리와 사고를 정확하게 표현하는 능력을 평가 할 수 있다는 장점을 지닌다. 이러한 졸업논문의 평가방법으로서의 우수성을 공학교육의 프로그램학습성과 성취도 평가에 이용하려면, 본 기법에 대한 정확한 이해를 바탕으로 우리 교육 실정과 프로그램공학 교육의 특징을 살펴 적용하여야 한다. 따라서 본 연구는 프로그램학습성과의 평가도구로서의 졸업논문의 특징과 함께 갖추어야할 성질 및 학습성과 평가를 실제 측정하기 위해 필요한 내용과 구체적인 루브릭의 예를 제시하였다. 또한 졸업논문을 이용하여 공학프로그램에서 공학인증기준을 만족시키는 방법에 대해서도 예를 들어 제시하였다.

• Coupled systems mechanics
• /
• 제4권1호
• /
• pp.37-65
• /
• 2015

Modeling and simulation of mechanical response of infrastructure object, solids and structures, relies on the use of computational models to foretell the state of a physical system under conditions for which such computational model has not been validated. Verification and Validation (V&V) procedures are the primary means of assessing accuracy, building confidence and credibility in modeling and computational simulations of behavior of those infrastructure objects. Validation is the process of determining a degree to which a model is an accurate representation of the real world from the perspective of the intended uses of the model. It is mainly a physics issue and provides evidence that the correct model is solved (Oberkampf et al. 2002). Our primary interest is in modeling and simulating behavior of porous particulate media that is fully saturated with pore fluid, including cyclic mobility and liquefaction. Fully saturated soils undergoing dynamic shaking fall in this category. Verification modeling and simulation of fully saturated porous soils is addressed in more detail by (Tasiopoulou et al. 2014), and in this paper we address validation. A set of centrifuge experiments is used for this purpose. Discussion is provided assessing the effects of scaling laws on centrifuge experiments and their influence on the validation. Available validation test are reviewed in view of first and second order phenomena and their importance to validation. For example, dynamics behavior of the system, following the dynamic time, and dissipation of the pore fluid pressures, following diffusion time, are not happening in the same time scale and those discrepancies are discussed. Laboratory tests, performed on soil that is used in centrifuge experiments, were used to calibrate material models that are then used in a validation process. Number of physical and numerical examples are used for validation and to illustrate presented discussion. In particular, it is shown that for the most part, numerical prediction of behavior, using laboratory test data to calibrate soil material model, prior to centrifuge experiments, can be validated using scaled tests. There are, of course, discrepancies, sources of which are analyzed and discussed.