• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.381-386
• /
• 2014

In order to investigate the effect of contact load, which is one of the fretting corrosion factors affecting the electric connector, a coupled fretting corrosion specimens were prepared using a tin-plated brass coupon with a thickness of $3{\mu}m$. Electric resistance of the contact was measured during the fretting corrosion test period. There was increase in resistance with fretting cycles. The change in resistance can be classified by 3 stages. The first stage exhibited low and stable resistance. Second stage showed steady increment of the resistance and third stage showed very high and intermittent resistance. The relationship between the failure cycle (Nf) and contact force (P) can be drawn as; It is possible to draw the prediction equation for the failure cycle of the electric connector corresponding to the very high and intermittent resistance under various environment conditions through the fretting tests under various conditions such as load, displacement, temperature.

• Journal of the Korean Society of Costume
• /
• v.57 no.6 s.115
• /
• pp.160-171
• /
• 2007

This research studied men's cosmetics purchasing behavior based on the level of interest one has in one's appearance, the country of origin, and the sales promotion of the cosmetics. The study was conducted by experimental $2{\times}[2{\times}2]$ design by combining the 3 variables mentioned above. The Independent variables in this research were levels of appearance interest(high vs. low), the country of origin(Korean vs. foreign), and types of sales promotion(discount vs. coupon). The dependent variables were the purchase behaviors including favor to cosmetics and purchase intent. Two hundred male consumers participated for the study. Data analysis conducted were factor analysis, cluster analysis and ANOVA. The results were as follows. 1. Male consumers' cosmetics favorness: 3-way significant interaction, in appearance interest, the country of origin, and types of sales promotion, was found for favor to male cosmetics. When male subjects were provided with price discounts and skin care coupons for the Korean cosmetics, they didn't reveal significant differences in favor, regardless of the level of appearance interest. However, for the imported cosmetics, male subjects with high appearance interest showed more favor to the cosmetics than the ones with low appearance interest. 2. Male consumers' purchase intent: 3-way significant interaction, in appearance interest, the country of origin, and types of sales promotion was found for the purchase intent. When male subjects were provided with price discounts and skin care coupons for the Korean cosmetics, they didn't show significant difference in purchase intent, regardless of their appearance interest. However, for the imported cosmetics, male consumers with high appearance interest reported more purchase intent than the ones with low appearance interest.

• Composites Research
• /
• v.31 no.1
• /
• pp.37-41
• /
• 2018

The aim of the current work is to characterise a piecewisely-integrated composite bumper beam based on the IIHS bumper crash protocol. IIHS bumper crash FE analysis for an aluminium type bumper beam was carried out to get the information about the dominant loading types at several regions in the bumper beam during crash. In the meantime, robust stacking sequences against tension and compression have been searched for using FE analysis of a coupon type model. After determining most effective stacking sequences for tension and compression, three-point bending simulation was preliminarily carried out to investigate the combination performance of them. Finally, IIHS bumper crash FE analysis for the piecewisely-integrated composite bumper beam, which consisted of the combination of tension effective stacking sequence and compression efficacious stacking sequence, was conducted and the result was compared with other types of composite bumper beams. It was found that the newly suggested piecewisely-integrated composite bumper beam showed superior crashworthy behaviour to those of uni-modal stacking sequence composite bumper beams.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.4 s.36
• /
• pp.252-261
• /
• 1990

This study intends to provide a beneficial foundation which can aid our understanding of how a clothing consumer group can be classified according to the clothing buying motives, and what differences are there about the importances of stroe image attribute among them and how consumer's preferences to the store image are shown differently among them and ultimately, some concrete data which can be useful in establishing efficient store image strategies for clothing stores. 413 subjects were gathered through convenience sampling method and, for data analysis, cronbach'$\alpha$, frequency, percentage, mean, $x^{2}-text$, 1-test, ANOVA, Duncan Multiple Range Test, Factor Analysis, Cluster Analysis were conducted. The results are as follows; 1. Three kind of factors in the clothing buying motives were determined for analysis of consumers group and by which it was revealed as to be significant for us to classify them four subdivisions; those of fashion pursuit group, self display group, financial utilitarian group, individual group. 2. Importance on store image attribute was revealed then the middle aged women regarded quality, price, service in order as more important factors than others. 3. Store image preferences show significantly when concerned with quality, price, fashion, impression and age of store personnel, convenience for exchanging and returning goods, credit, delivery and repair, mailing of catalogue and discount coupon, exit from, brightness of store among consumer groups. From these findings, concretely store image strategies are proposed.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.74-74
• /
• 2009

카본나노튜브(CNT) 복합체는 우수한 기계적 성질을 가지고 있어 다양한 분야에서 연구되고 있다. 본 연구에서는 카본나노튜브(CNT)를 간단한 볼밀공정을 사용하여 Sn3.5Ag solder ball과 SAC305 powder 표면에 혼합하고 이를 통해 접합부 특성을 관찰하였다. 볼밀을 실시하기 전 카본나노튜브(CNT)는 초음파을 이용하여 분산을 실시하였다. Sn3.5Ag solder ball의 직경은 450um이고 SAC305 powder의 직경은 약 30um이었으며 이때 사용한 볼밀볼의 직경은 각각 3mm, 1mm이다. 볼밀 회전속도는 약 300rpm이고 6, 12, 18, 24시간동안 볼밀을 실시하였다. 24시간 볼밀 후에도 solder ball과 solder powder의 모양은 크게 변하지 않았다. SEM을 통해 표면을 관찰한 결과 분산된 카본나노튜브(CNT)는 solder ball과 solder powder의 표면에서 관찰되었다. 카본나노튜브(CNT)가 삽입된 solder ball은 BGA coupon 위에 놓고 Reflow를 실시하여 접합하였고 solder powder은 flux를 첨가하여 paste로 제조하여 2012 chip에 대한 접합특성을 관찰하였다. 카본나노튜브(CNT)는 solder ball 내부의 표면근처에서 관찰되었으며 카본나노튜브(CNT)가 혼합된 solder ball은 Aging 실시 후에 IMC 두께가 카본나노튜브(CNT)가 혼합되지 않은 solder ball에 비해 두께가 작고 접합강도는 약 10% 증가하였다. 또한 카본나노튜브(CNT)가 혼합된 solder paste와 카본나노튜브(CNT)가 혼합되지 않은 solder paste를 비교한 결과 인쇄성은 모두 양호하였으며 카본나노튜브(CNT)가 혼합된 paste를 사용한 chip의 전단강도가 높게 나타났다.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.309-313
• /
• 2008

To investigate the antibacterial activity of the traditional bronze alloy Yugi, the cultures of Salmonella spp., Escherichia coli O157, Enterobacter sakazakii, and Bacillus cereus were exposed to the metal coupons of bronze, copper, tin, and stainless steel, and the sterilizing activities were analyzed. Antibacterial efficacy of copper coupon toward S. Typhimurium, E. coli, and E. sakazakii were the highest among them and those were followed by bronze, tin, and then stainless steel in the activity order. However, there was little sterilizing activity on Gram-positive B. cereus. Minimal inhibitory concentrations of cupric ion were 25 ppm for S. Typhimurium, E. coli, and E. sakazakii, and 50 ppm for B. cereus. Yugi bronze alloy showed more rigidity and practicality in comparison with copper, and has been used in Korea. Therefore, the bronze alloy may be more effective to reduce the cross-contamination of S. Typhimurium, E. coli, and E. sakazakii than stainless steel in food processing surface.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.145-152
• /
• 2015

Purpose: The inability to adequately judge the efficacy of cleaning and sanitation procedures in deli departments is a recognized food safety concern. In a prior study, our research group demonstrated that visual inspection of cleaned produce processing surfaces could be enhanced through the use of a portable fluorescence imaging device that detected residual produce residues. Methods: To explore the feasibility of using fluorescence imaging to similarly detect residual deli residues, spectra of American, Cheddar, Provolone, and Swiss cheeses and of processed chicken, ham, roast beef, and turkey were acquired using a laboratory hyperspectral imaging system. Circular punches of these commodities were placed onto stainless steel and high density polyethylene coupons for imaging. The coupon materials were selected to represent common surfaces found in deli departments. Results: Analysis of hyperspectral fluorescence images showed that cheeses exhibited peaks in the blue-green region and at around 675 nm. Meats exhibited peaks in the blue-green region with one of four ham and one of four chicken brands exhibiting peaks at around 675 nm, presumably due to use of plant-derived additives. When commodities were intermittently imaged over two weeks, locations of spectral peaks were preserved while intensity of peaks at shorter wavelengths increased with time. Conclusion: These results demonstrate that fluorescence imaging techniques have the potential to enhance surface hygiene inspection in deli departments and, given the immediate availability of imaging results, to help optimize routine cleaning procedures.

• Korean journal of food and cookery science
• /
• v.29 no.2
• /
• pp.169-175
• /
• 2013

The purpose of this study was to provide the basic information necessary to efficiently run a coffee shop. It comparatively analyzes the relative importance and satisfaction of side menu selection characteristics through analyses on customer importance-satisfaction when selecting a side menu as well as their usage behavior of the side menu at coffee shops. According to reason price the analysis result on the differences in the coffee shop side menu importance and satisfaction, there was a difference because the importance of selecting a side menu was higher for the attributes of taste, health, packing & appearance, economics and personnel service compared to satisfaction among which the price of a side menu was found to be the top priority for improvement. The significance of coffee shop side menu for the respondents prior to usage as well as their satisfaction after usage was evaluated in order to comparatively analyze the relative importance and achievement of each characteristic through the IPA. The result indicated that the variables positioned in the Concentrate Here area (II) were related to economic feasibility such as reasonable price, appropriate price of set menu, telecommunication company affiliated service and coupon usage and point accumulation. As for the Keep up the Good Work area (I), there were many variables regarding personnel service including taste of side menu, blending with coffee, clean packing, clean packaging, staff's side menu knowledge, staff's quick response, staff's politeness and staff's sincere response. As for the variables in the Low Priority area (III), health variables on health such as nutritional value, eco-friendly food materials and calories were observed.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.83-93
• /
• 2008

Space truss is a rational system which forming large span in spatial structure and the steel tube is used well as a structure member in truss system. This study includes coupon test and Stub-column compression test on the structural steel tube. The compression test of Stub-column was performed to characterize and quantify the material characteristic and strength of column. In this study, we also researched the matter of compatibility, in which we compared the experiment formula and the abstract formula by the application of the LSD standard formula, SSRC and ECCS multiple column curve.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.57-73
• /
• 2008

The present paper focuses on experimental verification of the ply-by-ply basis inelastic analysis of multidirectional laminates. First of all, rate dependence of the tensile behavior of balanced symmetric cross-ply T800H/epoxy laminates with a $[0/90]_{3S}$ lay-up under off-axis loading conditions at $100^{\circ}C$ is examined. Uniaxial tension tests are performed on plain coupon specimens with various fiber orientations $[{\theta}/(90-{\theta})]_{3S}$ ($\theta$ = 0, 5, 15, 45 and $90^{\circ}C$) at two different strain rates (1.0 and 0.01%/min). The off-axis stress.strain curves exhibit marked nonlinearity for all the off-axis fiber orientations except for the on-axis fiber orientations $\theta$ = 0 and $90^{\circ}$, regardless of the strain rates. Strain rate has significant influences not only on the off-axis flow stress in the regime of nonlinear response but also on the apparent off-axis elastic modulus in the regime of initial linear response. A macromechanical constitutive model based on a ply viscoplasticity model and the classical laminated plate theory is applied to predictions of the rate-dependent off-axis nonlinear behavior of the cross-ply CFRP laminate. The material constants involved by the ply viscoplasticity model are identified on the basis of the experimental results on the unidirectional laminate of the same carbon/epoxy system. It is demonstrated that good agreements between the predicted and observed results are obtained by taking account of the fiber rotation induced by deformation as well as the rate dependence of the initial Young's moduli.