• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.429-438
• /
• 2011

In order to simulate a free surface flow in a trench channel, a three-dimensional incompressible unsteady Reynolds-averaged Navier-Stokes (RANS) equations are closed with the ${\kappa}-{\epsilon}$ model. The artificial compressibility (AC) method is used. Because the pressure fields can be coupled directly with the velocity fields, the incompressible Navier-Stokes (INS) equations can be solved for the unknown variables such as velocity components and pressure. The governing equations are discretized in a conservation form using a second order accurate finite volume method on non-staggered grids. In order to prevent the oscillatory behavior of computed solutions known as odd-even decoupling, an artificial dissipation using the flux-difference splitting upwind scheme is applied. To enhance the efficiency and robustness of the numerical algorithm, the implicit method of the Beam and Warming method is employed. The treatment of the free surface, so-called interface-tracking method, is proposed using the free surface evolution equation and the kinematic free surface boundary conditions at the free surface instead of the dynamic free surface boundary condition. AC method in this paper can be applied only to the hydrodynamic pressure using the decomposition into hydrostatic pressure and hydrodynamic pressure components. In this study, the boundary-fitted grids are used and advanced each time the free surface moved. The accuracy of our RANS solver is compared with the laboratory experimental and numerical data for a fully turbulent shallow-water trench flow. The algorithm yields practically identical velocity profiles that are in good overall agreement with the laboratory experimental measurement for the turbulent flow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.459-459
• /
• 2007

VHF ICP (Very High Frequency Inductively Coupled Plasma) 반응기에서 반응기 압력, 수증기 유량, 플라즈마 출력, 반응기온도 등의 공정변수에 따른 수증기 분해특성과 수소생성거동을 실험하였다. 플라즈마 분해 특성은 OES(Optical Emission Spectroscopy)를 사용하여 분석하였으며, QMS(Quadrapole Mass Spectroscopy)를 이용하여 배기가스 성분을 분석하여, 수증기 분해거동 및 수소생성 효율을 조사하였다. 본 연구실에서 설계한 초고주파 유도결합 플라즈마는 고밀도 플라즈마 생성과 낮은 압력에서도 안정된 플라즈마 발생 특징을 나타내었다. 플라즈마 출력의 증가에 따른 수증기의 분해와 수소생성 거동은 개시영역, 선형증가영역, 포화영역의 세 영역으로 구분되는 특징을 나타내었다. 유량 및 압력의 증가에 따라 포화에 필요한 플라즈마의 출력이 증가되는 경향을 나타내었다. 본 실험의 온도범위에서는 온도 증가에 따른 수증기 분해 및 수소생성 증가효과는 플라즈마 출력의 영향에 비하여 매우 미미한 정도로 플라즈마의 높은 에너지 전달효과를 확인할 수 있었다. 따라서, 낮은 반응기 온도에서도, 유량 및 압력에 따른 포화 플라즈마조건을 설정할 경우, 높은 에너지 효율의 수소 제조가 가능함을 알 수 있었으며, 물분해 플라즈마를 이용한 저온 산화물 박막증착에의 적용도 기대된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권2호
• /
• pp.47-54
• /
• 2015

The objective of this study was to optimize the experimental conditions for bioleaching of arsenic (As) using Herbaspirillum sp. GW103 and to understand the interaction between bacteria and As during bioleaching. Five variables, temperature, time, CaCO₃, coconut oil cake, and shaking rate, were optimized using response surface methodology (RSM) based Box-Behnken design (BBD). Maximum (73.2%) bioleaching of As was observed at 30℃, 60 h incubation, 1.75% CaCO₃, 3% coconut oil cake, and 140 rpm. Sequential extraction of bioleached soil revealed that the isolate Herbaspirillum sp. GW103 significantly reduced 28.6% of water soluble fraction and increased 38.8% of the carbonate fraction. The results of the study indicate that the diazotrophic bacteria Herbaspirillum sp. could be used for bioleaching As from mine soil.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.262-270
• /
• 1987

본 논문에서는 Eulerian 좌표축에서 온도 경계층과 혼합된 비정상 경계층 유 동을 효과적으로 다룰 수 있는 좌표변환 방법과 수치해석 방법을 도입하였다. 이전 의 수치적 방법들은 축차적이며, 뒷정체점 부근의 경계층 두께가 시간과 더불어 지수 적으로 증가하므로, 격자점의 수를 경계층 두께의 증가에 따라 상당히 늘려 주어야 된 다. 그러나 여기에서는, 격자점의 수를 무리하게 늘릴 필요가 없으며 일반적인 비선 형 차분방정식을 정확도를 떨어뜨리지 않고 선형화시킴으로써 비축차적인 수치해들이 허용된다. 이런 선형화 방법은 Beam & Warming에 의해 최초로 압축성 Navier-Stokes 방정식에 사용되었고, Orlandi & Ferziger, Kim & Chang에 의해 경계층 유동에 확장되 었다.또한 뒷정체점 부근에서 경계층 두께의 증가로 인한, 격자점 증가의 필요를 피하기 위하여, 몇 가지 서로 다른 종류의 변환변수들을 시간과 공간에 따라 선별적으 로 사용하여 수치적인 경계층 두께가 거의 일정하도록 만들었다. 이와 같은 변환변 수들은 또한 쌍-포물선형인 현 지배방정식의 초기조건들을 쉽게 구할 수 있도록 허용 해 준다.

• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.15-22
• /
• 1999

This study investigated the mordanting effect of natural mordants such as camellia ash, bean chaff ash and pyrolignite of iron(Iron(II) Acetate) on silk fabrics dyed with green tea extracts. Experimental variables include the conditions of extraction and dyeing, and types of natural mordants. Inorganic ion contents In natural mordants were analysed by Induced Coupled Plasma Atomic Emission Spectrometer. In the ash Al, Fe, Si and Mn were in % unit, Cr and Ni were detected in ppm unit, and in the aqueous extracts of the ash all the metal ions were in ppm unit. On the other hand, fairly high content of Al(2.13% ) in camellia ash extract and Fe(7.91% ) in the aqueous extracts of pyrolignite iron were detected. The absorbance intensity of green tea extracts in UV-Visible spectrum increased with the temperature and time of extraction. The maximum absorption wavelength of the extracts appeared at 272.5nm and 210.5nm. The US values of silk fabrics dyed with green tea extracts were increased with temperature and time of dyeing. Surface color of silk fabric dyed with green tea extracts was 9.1YR, but it was changed from 7.9YR to 7.5YR by camellia ash extract and 7.4YR to 6.4YR by bean chaff ash extract with increase in mordant concentration. Pre-mordanted and post-mordanted fabrics with pyrolignite of iron were changed from 1.4YR to 1.1R and 7.2P to 4.2P, respectively.

• Coupled systems mechanics
• /
• 제4권4호
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• 대기
• /
• 제31권3호
• /
• pp.295-309
• /
• 2021

Diurnal variations of air temperature and relative humidity in the Urban Canopy Layer (UCL) of the Seoul metropolitan area are examined using the Weather Research and Forecasting model coupled with the Seoul National University Urban Canopy Model. The canopy layer air temperature is higher than 2-m air temperature and exhibits a more rapid rise and an earlier peak in the daytime. These result from the multiple reflections of shortwave radiation and longwave radiation trapping due to the urban geometry. Because of the absence of vegetation in the UCL and the higher canopy layer air temperature, the canopy layer relative humidity is lower than 2-m relative humidity. Additional simulations with building height changes are conducted to examine the sensitivities of the canopy layer meteorological variables to the urban canyon aspect ratio. As the aspect ratio increases, net sensible heat flux entering the UCL increases (decreases) in the daytime (nighttime). However, the increase in the volume of the UCL reduces the magnitude of change rate of the canopy layer air temperature. As a result, the canopy layer air temperature generally decreases in the daytime and increases in the nighttime as the aspect ratio increases. The changes in the canopy layer relative humidity due to the aspect ratio change are largely determined by the canopy layer air temperature. As the aspect ratio increases, the canopy layer relative humidity is generally increased in the daytime and decreased in the nighttime, contrary to the canopy layer air temperature.

• 대기
• /
• 제29권2호
• /
• pp.149-164
• /
• 2019

The purpose of this study is to introduce the improvement of current operational climate prediction system of KMA and to compare previous and improved that. Whereas the previous system is based on GloSea5GA3, the improved one is built on GloSea5GC2. GloSea5GC2 is a fully coupled global climate model with an atmosphere, ocean, sea-ice and land components through the coupler OASIS. This is comprised of component configurations Global Atmosphere 6.0 (GA6.0), Global Land 6.0 (GL6.0), Global Ocean 5.0 (GO5.0) and Global Sea Ice 6.0 (GSI6.0). The compositions have improved sea-ice parameters over the previous model. The model resolution is N216L85 (~60 km in mid-latitudes) in the atmosphere and ORCA0.25L75 ($0.25^{\circ}$ on a tri-polar grid) in the ocean. In this research, the predictability of each system is evaluated using by RMSE, Correlation and MSSS, and the variables are 500 hPa geopotential height (h500), 850 hPa temperature (t850) and Sea surface temperature (SST). A predictive performance shows that GloSea5GC2 is better than GloSea5GA3. For example, the RMSE of h500 of 1-month forecast is decreased from 23.89 gpm to 22.21 gpm in East Asia. For Nino3.4 area of SST, the improvements to GloSeaGC2 result in a decrease in RMSE, which become apparent over time. It can be concluded that GloSea5GC2 has a great performance for seasonal prediction.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.73-87
• /
• 2011

An abnormal mono-specific bloom of the cyanobacterium Microcystis aeruginosa had developed at a specific location (transitional zone, monitoring station of Hoenam) in Daecheong Reservoir from middle of July to early August, 2001. The maximum cell counts during the peak bloom reached 1,477,500 cells/mL, which was more than 6~10 times greater than those at other monitoring sites. The hypothesis of this study is that the timing and location of the algal bloom was highly correlated with the local environmental niche that was controled by physical processes such as hydrodynamic mixing and pollutant transport in the reservoir. A three-dimensional, coupled hydrodynamic and ecological model, ELCOM-CAEDYM, was applied to the period of development and subsequent decline of the bloom. The model was calibrated against observed water temperature profiles and water quality variables for different locations, and applied to reproduce the algal bloom event and justify the limiting factor that controled the Microcystis bloom at R3. The simulation results supported the hypothesis that the phosphorus loading induced from a contaminated tributary during several runoff events are closely related to the rapid growth of Microcystis during the period of bloom. Also the physical environments of the reservoir such as a strong thermal stratification and weak wind velocity conditions provided competitive advantage to Microcystis given its light adaptation capability. The results show how the ELCOM-CAEDYM captures the complex interactions between the hydrodynamic and biogeochemical processes, and the local environmental niche that is preferable for cyanobacterial species growth.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.148-154
• /
• 2022

Background: Bus driving is a mentally demanding activity that requires prolonged attention to ensure safety. The aim of the study was to assess mental fatigue caused by driving a public bus and to find a profile of workers at higher risk. Methods: We evaluated changes of critical flicker fusion (CFF) (index of central arousal) and heart rate variability (HRV) (index of autonomic balance) in a 6-hour driving shift on a real route, in 31 professional bus drivers, and we tested the influence of personal factors such as sleep quality, BMI, and age. Paired t-test was used to test differences of CFF and HRV between both initial and final phase of driving, while multiple linear regression tested the influence of personal variables on the indexes of mental fatigue. Results: Results showed that CFF significantly decreased after 6 hours of bus driving (41.91 Hz, sd 3.31 vs. 41.15 Hz, sd 3.15; p = 0.041), and heart rate significantly decreased in the final phase of driving, with respect to the initial phase (85 vs. 78 bpm, p = 0.027). Increasing age (beta = -0.729, p = 0.022), risk of obstructive sleep apnea syndrome (beta = -0.530, p = 0.04), and diurnal sleepiness (beta = -0.406, p = 0.017) showed a significant effect on influencing mental fatigue. Conclusion: Elderly drivers at higher risk of sleep disorders are more prone to mental fatigue, when exposed to driving activity. Monitoring indexes of central arousal and autonomic balance, coupled with the use of structured questionnaires can represent a useful strategy to detect profile of workers at higher risk of mental fatigue in such duty.