• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.1
• /
• pp.16-24
• /
• 2005

Mathematical model was developed to verify a sequential particle removal taking place in a granular media gravity filter. Consequential multi-layer filtration cycle model was applied to verify the fraction of filter effluent particles that are filter influent particles that were never removed as well as the fraction of filter effluent particles that were detached after deposition were performed through laboratory experiments. Three sizes of marker particles were injected ahead of the filter column as a pulse in the presence of four sizes of polystyrene particles that were used as a primary source of particles in the raw suspension to investigate particle attachment alone in contrast to net removal from attachment and detachment. Microscopic counting of filter effluent particles was assumed to reflect attachment. Experimental results indicated that particle detachment is significant beginning from the early phase of filtration. For each size of fluorescent microspheres at one filter depth, fluorescent microsphere removal increased with filter runtime to a maximum due to ripening. The detached fraction of effluent particles increased with particle size and filter depth. The presence of detached particles and the increasing fraction of detached particles in deeper bed were confirmed.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.37.3-37.3
• /
• 2008

STJ(Superconducting Tunnel Junction) technique offers next generation photon detectors exhibiting high energy resolution, high quantum efficiency and photon counting ability over the broad wavelength range from X-ray to NIR. We report the succcess in fabrication of Ta/Al-AlOx-Al/Ta and Nb/Al-AlOx-Al/Nb micro structure deposited on sapphire substrates using various techniques including UV photolithography, DC Sputtering, RIE, and PECVD technique. The characterization experiment was undertaken in an Adiabatic Demagnetization Refrigerator at an operating temperature below 50mK. The details of experimental investigations for electrical characterization of STJ of $20\sim80{\mu}m$ in side-lengths are discussed. The measured I-V curves were used to derive The detector performance indicators such as energy gap, energy resolution, normal resistance, normal resistivity, dynamic resistance, dynamic resistivity, and quality factor.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.1
• /
• pp.3-6
• /
• 2008

Electrical discharge machining (EDM) is one of the most widespread nonconventional machining processes. Recently, a low-power micro-EDM process was introduced using a cylindrical electrode. Since its development, micro-EDM has been applied effectively to micromachining, and because the device setup for this process is simple, it is suitable for a microfactory that minimizes machines to fabricate small products economically in one system. In the EDM process, however, the electrode is also removed along with the workpiece. Therefore, the electrode shape and length vary as machining progresses. In this paper, a control method using a high speed realtime voltage measurement is proposed to regulate the rate and amount of material removed. The proposed method is based on the assumption that the volume of the workpiece removed in a single discharge pulses is nearly constant. The discharge pulses are monitored and controlled to regulate the amount of material removed. For this purpose, we developed an algorithm and apparatus for counting the number of discharge pulses. Electrode wear compensation using pulse number information was applied to EDM milling in a microfactory, in which a slight tilt of the workpiece may occur. The proposed control method improves the machining quality and efficiency by eliminating the inaccuracies caused by electrode wear and workpiece tilt.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.163-170
• /
• 2004

Since 1960s, a container shipping volume has increased dramatically and continuous on a trend of rapid growth, and so the number of containers handled at the port increases. The position measurement of the yard crane is very important for improving the operating efficiency of the port. This paper describes the method to measure the absolute position of yard crane accurately and rapidly, using both the output pulse of an encoder and infrared sensors. The crane position is calculated by counting the output pulse of an incremental encoder, which is mounted on the wheel in the crane. By the way, the wheel slippage on rail may cause some errors in the crane position information obtained from encoder pulse, and the infrared sensor is used to compensate for errors in the crane position information. The performance of proposed method is verified on experimental results with the simulator of yard crane, the size of which is about 1/10 with the real crane.

• Reproductive and Developmental Biology
• /
• v.32 no.1
• /
• pp.15-20
• /
• 2008

Pronuclear DNA microinjection has been the most universal method in transgenic animal production but its success rate of transgenesis in mammals are extremely low. To address this long-standing problem, we used retrovirus- and lentivirus-based vectors carrying the enhanced green fluorescent protein (EGFP) gene under the control of ubiquitously active cytomegalovirus (CMV) promoter to deliver transgenes to bovine embryos. The rate of transgenesis was evaluated by counting EGFP positive blastocysts after injection of concentrated virus stock into the perivitelline space of the bovine oocytes in metaphase II. Among two different types of lentivirus vectors derived from FIV (feline immunodeficiency virus) and HIV (human immunodeficiency virus), the former scored the higher gene transfer efficiency; almost 100% of the blastocysts developed from the oocytes infected with FIV-based vector were EGFP positive. As for the vectors derived Com HIV lentivirus, the transgenesis rate of the blastocysts was reduced to 39%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.515-528
• /
• 2012

The aim of this article is to provide a study on the issue of inventory inaccuracy and to show the manner in which RFID technology can improve the inventory management performance. The objective of inventory control is to monitor the stock flow of merchandises in order to understand the operating profit and loss. A proper mechanism of inventory control could be made to help the profitability. As RFID is applied to inventory control, it can improve efficiency, enhance accuracy and achieve security. In this paper, we introduce the evolution of different mechanisms of inventory control with RFID system-counting method, collect-all method, and continuous monitoring method. As for improving the accuracy of inventory check during business hours, continuous monitoring is the solution. We introduce the infrastructure of the RFID inventory management system based on M2M architecture can make the inventory be efficiently monitored with instant warnings.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.6
• /
• pp.5-11
• /
• 2003

The number of the enterprises which utilize network technology has been increasing for solving problems such as productivity improvement, market trend analysis, and material collection for making decision. Especially, the management of equipment and the recovery time reduction when machines break down are very important factors in productivity improvement of the enterprise. Currently, most of the remote trouble diagnosis of equipment using the internet have just one function of transmitting the trouble information to the user. Therefore it does not directly reflect the user's recovery experience or the developer's new recovery methods. If the user's experienced recovery methods or the developer's recovery methods as well as the basic recovery methods are reflected online or on the internet, it makes it possible to recover faster than before. In this paper, we develop a Remote Monitoring Server (RMS) for chip mounters, and make it possible to reduce the recovery time by reflecting the user's experience and developer's new methods in addition to presenting the basic recovery methods. For this, trouble recovery concept will be defined. Based on this, many functions(trouble diagnosis, the presentation of the basic recovery methods, user's and developer's recovery method, counting function of the trouble number of each code, and presentation of usage number of each recovery methods) were developed. By utilizing the reports of the actual results of chip mounter and the notice function of the parts change time, the rate of operation of the chip mounter can be improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.2
• /
• pp.209-218
• /
• 2009

In a wireless sensor network(WSN) each sensor node deals with numerous sensing data elements. For the sake of energy efficiency and network lifetime, sensing data must be handled effectively. A technique used for this is data aggregation. Sending/receiving data involves numerous steps such as MAC layer control packet handshakes and route path setup, and these steps consume energy. Because these steps are involved in all data communication, the total cost increases are related to the counts of data sent/received. Therefore, many studies have proposed sending combined data, which is known as data aggregation. Very effective methods to aggregate sensing data have been suggested, but there is no means of deciding how long the sensor node should wait for aggregation. This is a very important issue, because the wait time affects the total communication cost and data reliability. There are two types of data aggregation; the data counting method and the time waiting method. However, each has weaknesses in terms of the delay. A hybrid method can be adopted to alleviate these problems. But, it cannot provide an optimal point of aggregation. In this paper, we suggest a stochastic-based data aggregation scheme, which provides the cost(in terms of communication and delay) optimal aggregation point. We present numerical analysis and results.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.455-460
• /
• 2005

A pilot-scale sulfur particle autotrophic denitrification (SPAD) process for the treatment of municipal wastewater was operated for 10 months at Shihwa, Korea, and higher than $90\%\;NO^{-}_{3}-N$ removal efficiency was observed. Plate counting showed that the lower part of the denitrifying column reactor had the most autotrophic denitrifiers. The biofilm thickness formed on sulfur particles from the SPAD reactor was approximately $25-30\;{\mu}m$, measured by DAPI (4,6-diamidino-2-phenylindole) staining. The presence of bacteria inside the highly porous sulfur particle was also monitored by SEM observation of the internal surfaces of broken sulfur particles. Biofilm extracellular polymeric substances (EPS) analysis showed that the ratio of carbohydrate to protein decreased with the reactor heights at which biofilm-formed sulfur particles were obtained.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.242-245
• /
• 2013

Monte Carlo method was applied to discriminate the external contamination on radiation workers in nuclear power plants for internal dose assessment generally used with a bed type scanning detector whole body counter. Korean voxel model with internal contamination was used to estimate the detection patterns of whole body scanning. Also, the BOMAB model with various external contamination was assumed to compare with detection of radionuclides inside the human body. From the comparison of detection efficiency between front and back side up, external contamination was easily distinguished.