• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.109-116
• /
• 2014

In this study, the factors affecting the profitability of the oriental medicine hospitals of University to be analyzed. To do this, profitability indicators and current ratio, liquidity, turnover ratio, cost factors analysis and suggested ways to improve management. The results are as follows, the operating margin(1.17%). the return on assets(3.76%), the net profit to gross revenues(2.37%), and the net profit to total assets(-1.89) were lower than the average of the entire oriental medicine hospitals in Korea(respectively 8.9%, 8.7%, 2.6%, 2.5%). Current ratio(256.76%), quick ratio(231.17%), fixed ratio(121.02%), and total assets turnover(135.69%) were similar to the average of all oriental medicine hospitals in Korea. But growth rate of total assets(-2.21%), and growth rate of patient revenue(1.89%) is low. And salaries(53.39%), materials costs(16.62%), administrative expenses(28.58%) were different to the average of all oriental medicine hospitals in Korea(respectively 35.3%, 10.7%, 45.1%). Meanwhile, the cost ratio of the oriental medicine hospitals of University was 98.59%. It was 7.49% higher than the 91.1% of the average of all oriental medicine hospitals in 2011. Correlation analysis, growth rate of patient revenue and operating margin increased at the same time, and net profit to gross revenues and net profit to total assets with a growth rate of total assets increased. And administrative expenses and profitability indicators showed a negative correlation. It means, in order to improve the profitability of the oriental medicine hospitals of University should focus on reducing administrative expenses. Multiple regression analysis, growth rate of total assets, total assets turnover, administrative expenses, and salaries has affected the profitability. Therefore, in order to improve the profitability of the oriental medicine hospitals of University to increase the total capital and the total capital turnover, and to reduce administrative expenses effort.

• Management & Information Systems Review
• /
• v.34 no.2
• /
• pp.131-149
• /
• 2015

Recently many organizations have engaged in widespread restructuring as well as more flexible usage of labor in an attempt to cut costs and to increase profit. As a result of lays offs resulting from frequent restructuring, many people no longer consider their jobs as permanent positions. many employees have an increased feeling of job insecurity. There structuring and following downsizing have created an uncertain environment within creased fear offer ther job losses. therefore the study of job insecurity is significant. especially To understand the relationship between job security and union-relation behaviors on the industrial relations. The purpose of this study suggested the strategies to company and union. The purpose of this study is to examine how the union-relation behaviors are influenced by the job security. This study built a exploratory model that there is causal relationship of job security to union commitment, dual commitment, and labor related behaviors. For the verification of this study model, the regression analysis was applied to the surveys of 236 members of union that are located in Busan, Gyeongnam, Ulsan, and Pohang. The result of this research shows that the job insecurity is strongly related to the union commitment and union related behaviors. According to the research, the effect that the job security affects union commitment and union related behaviors are positive. With the research outputs, we have discussed about the academic and pragmatic viewpoint. We proposed comprehensive model to verify how the job insecurity affects the union-related behaviors, and objectively analyzed the model. The research result was opposite to what the existing theories have said that high job insecurity derives high union-related behaviors. This result is meaningful because it is concerned with the social issues-present situation of Korean company, low-employment, unstable employment and so on. Moreover, this research may contribute to expand the aspect of academic research on job insecurity as there are few research conducted in korea. This research also suggests the realistic alternative of union-related behaviors because it is proved that job security can contribute to innovation activities. Also, this research implies that the matter of job insecurity is the basic need of organizational individual and presents that job security is not a notion but the alternative by using of the positional stability and situational control power. The limitation of this research is that it is only utilized the cross-sectional study. To remedy the cross-sectional study, vertical, and serial method of research is needed. And there is no enough sample to secure more comprehensive data as the targets of the research is limited to Busan and Gyeongnam regions. Finally, the measurement tool for job security is needed to be suitably modified to by the South Korea's economic, linguistic, and cultural situation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.10-10
• /
• 2017

Rice consumption has been continuously decreasing as the eating habits of Koreans have become westernized and diversified. The per capita annual rice consumption in Korea has dropped sharply from 136.4 kg in 1970 to 61.9 kg in 2016. The Korean government, therefore, has been trying to promote rice consumption by invigorating the processed food industry using rice flour. To facilitate the market for processed rice foods, it is essential to develop proper milling technology in terms of flour particle size and damaged starch content to produce high quality rice flour at competitive cost. Dry milling and wet milling are the two major processes used to produce rice flour. Although the dry milling process is relatively simple with a lower production cost, damaged starch content increases because of the high grain hardness of rice. In wet milling, the quality of rice flour is improved by reducing flour particle size as well as damaged starch content through soaking procedures. However, the production costs are high because of the additional expenses associated with the disposal of waste water, sterilization and drying of the wet flour. Recently developed technologies such as jet milling and cryogenic milling also require expensive investment and production. Therefore, developing new rice cultivars with dry milling adaptability as well as good processing properties is an important goal of rice breeding in Korea. 'Suweon 542' is a floury endosperm mutant line derived from sodium azide treatment on a high-yield, early maturing, and non-glutinous japonica rice cultivar, 'Namil'. Compared with the wild type, after dry milling process, the grain hardness of 'Suweon 542' was significantly lower because of its round and loosely packed starch granules. Also, the flour of 'Suweon 542' had significantly smaller particles and less damaged starch than 'Namil' and other rice cultivars and its particle size distribution was similar to a commercial wheat cultivar. Recently, through collaborations with nine universities and food companies, a total of 21 kinds of processed prototypes, using the dry milling flour of 'Suweon 542', were evaluated. In the production of major rice processing products, there was no significant quality difference between the flours prepared by wet milling and dry milling. Although the amount of water added to the dough was slightly increased, it was confirmed that the recipe applying the wet flour could be used without significant change. To efficiently transfer the floury endosperm characteristics of 'Suweon 542' to other commercial rice cultivars, it is essential to develop DNA marker tightly linked to the target gene. Association analysis using 70 genome-wide SSR markers and 94 F2 plants derived from 'Suweon 542'/'Milyang 23' showed that markers on chromosome 5 explained a large portion of the variation in floury grains percentage (FGP). Further analysis with an increased number of SSR markers revealed that the floury endosperm of 'Suweon 542' was directed by a major recessive locus, flo7(t), located in the 19.33-19.86 Mbp region of chromosome 5, with RM18639 explaining 92.2% of FGP variation in the F2 population. Through further physical mapping, a co-segregate and co-dominant DNA marker with the locus, flo7(t) was successfully developed, by which, thereby, breeding efficiency of rice cultivars having proper dry milling adaptability with high yield potential or useful functional materials would be improved. 'Suweon 542' maintained the early maturity of the wild type, Namil, which can be used in rice-wheat double cropping systems in Korea not only for improved arable land but also for sharing flour production facilities. In addition to the high susceptibility against major rice diseases, nevertheless, another possible drawback of 'Suweon 542' is the high rate of viviparous under prolonged rainfall during the harvesting season. To overcome susceptibility and vivipary of 'Suweon 542', the progeny lines, derived from the crosses 'Suweon 542' and 'Jopyeong', an early maturing rice cultivar with multiple resistance against rice blast, bacterial blight, and rice strip virus, and 'Heugjinju', a anthocyanin pigment containing black rice cultivar, were intensively evaluated. As the outputs, three dry milling suitable rice elite lines, 'Jeonju614', 'Jeonju615', and 'Jeonju616' were developed.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Journal of Animal Environmental Science
• /
• v.18 no.3
• /
• pp.257-266
• /
• 2012

Near infrared reflectance spectroscopy (NIRS) has become increasingly used as a rapid, accurate method of evaluating some chemical constituents in cereal and dired animal forages. Analysis of forage quality by NIRS usually involves dry grinding samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations on prediction ability of chemical composition and fermentation parameter for Italian ryegrass silages by NIRS. A population of 147 Italian ryegrass silages representing a wide range in chemical parameters were used in this investigation. Samples were scanned at 1nm intervals over the wavelength range 680-2500 nm and the optical data recorded as log 1/Reflectance (log 1/R) and scanned in oven-dried grinding and fresh ungrinding condition. The spectral data were regressed against a range of chemical parameters using partial least squares (PLS) multivariate analysis in conjunction with four spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV) and maximizing the correlation coefficient of cross validation (${R^2}_{CV}$). The results of this study show that NIRS predicted the chemical parameters with high degree of accuracy in oven-dried grinding treatment except for moisture contents. Prediction accuracy of the moisture contents was better for fresh ungrinding treatment (SECV 1.37%, $R^2$ 0.96) than for oven-dried grinding treatments (SECV 4.31%, $R^2$ 0.68). Although the statistical indexes for accuracy of the prediction were the lower in fresh ungrinding treatment, fresh treatment may be acceptable when processing is costly or when some changes in component due to the processing are expected. Results of this experiment showed the possibility of NIRS method to predict the chemical composition and fermentation parameter of Italian ryegrass silages as routine analysis method in feeding value evaluation and for farmer advice.

• The Korean Society of Law and Medicine
• /
• v.18 no.1
• /
• pp.297-341
• /
• 2017

We searched out court rulings on medical affairs through court library search sites and specialized articles on medically relevant judgments sentenced in 2016. And we selected and analyzed the judgements of the court we considered important as follows. In relation to the medical civil judgements, (1) In the case of applying surgery for female infertility during cesarean section operation but it has not been done, we expressed the regret for the lack of judgment in the process of entering the medical contract, introducing the rights infringed and the scope of compensation, (2) We pointed out that the ruling on the medical malpractice estimation goes out of limit of negligence estimation doctrine, and that the court asked very high degree duty of the traditional Korean medicine doctors to cooperate with Western medicine doctors. (3) In the case of admitting hospital's 100% responsibility, we pointed out the court overlooked the uncertainty and good intention of the medical practice. (4) Additionally, We introduced the cases admitted the hospital's responsibility in the accident related to the psychiatric patients in closed ward. Relating to a medical criminal ruling, we analyzed the supreme court decision about whether the dentist's Botox injection on the patient's face is a medical practice within the scope of the license from the viewpoint whether it is within the possible range of the word. And, concerning decisions on healthcare administration, (1) we analyzed the case about when medical personnel operate multiple medical institutions, whether it is possible to get back medical care costs under the National Health Insurance Law, (2) We commented on the ruling regarding explanation obligation in terms of object, degree, subject of explanation as a prerequisite for permissible arbitrary uninsured benefits. Finally, we reviewed the decision of the Constitutional Court about the Article 24 of the Mental Health Law, which it had allowed for a mental patient to be hospitalized forcibly by the consent of two guardians and a diagnosis of a psychiatrist. Also we indicated the problems of the revised Mental Health Law.

• Korean journal of food and cookery science
• /
• v.3 no.2
• /
• pp.87-99
• /
• 1987

The serving temperature control practices were assessed in 20 general hospital's dietetics utilizing centralized or decentralized tray assembly systems. The results of the study were summarized as follows : 1) All of the surveyed hospitals were utilizing conventional foodservice system. The number of dietary employees per bed was very low when comparing with that in America. Working hours of employees per week were approximately two times greater than those in America. 2) When comparing two tray assembly systems, dietary labor hours and costs in centralized system were less than those in decentralized system. 3) When comparing serving temperature practices between two tray assembly systems, the temperatures of meals utilizing centralized tray service were significantly lower than those in decentralized system, and only the steamed rice served in decentralized system was within the acceptable temperature range. 4) There was no significant difference in sensory acceptance scores marked by patients served by two different types of tray assembly systems. The serving temperature was significantly correlated to the patient's overall acceptability.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.6
• /
• pp.535-542
• /
• 2004

Background : Despite the clinical clues of bronchial asthma, some chronic coughers fail to be diagnosed due to negative test results. This study was aimed at evaluating the diagnostic performance of routine objective tests and identifying a cost-effective approach for asthmatics with a chronic cough. Methods : Patients with a chronic cough of more than 3 weeks duration, and showing normal chest radiograph and spirometry were enrolled. On the first visit, objective tests, composed of serum total IgE, peripheral blood eosinophil count, spontaneous sputum eosinophil count, methacholine bronchial provocation test (MBPT) and paranasal sinus radiograph, were performed, with the simultaneous administration of oral prednisolone (0.5mg/kg) for one week. The final diagnoses were made on the basis of the test results, and the patients grouped according to their steroid responsiveness. The role of the etiologic diagnosis tests was evaluated, and the medical costs of the final management plan simulated with respect to three assumed models. Results : Sixty chronic coughers were finally analyzed. The final diagnoses were as follows: bronchial asthma 21.7%, eosinophilic bronchitis 6.7%, paranasal sinusitis 18.3%, presumptive allergy 8.3% and non-diagnostic case 45.0%. Ninety percent were steroid responder. With the bronchial asthma cases, the positive rate of MBPT was 38.5%, with sputum eosinophil count in 84.6%, serum total IgE in 38.5%, and a peripheral blood eosinophil count rate of 30.8%. When the test results and steroid responsiveness data were applied to the 3 models, the chest radiograph, spirometry, sputum eosinophil count and paranasal sinus radiograph test results, and simultaneous short term steroid treatment seemed to have acceptable diagnostic performances, which could be used as a further guide to cost-effective planning. Conclusion : Objective tests, composed of chest radiograph, spirometry, paranasal sinus radiograph and sputum eosinophil count, with simultaneous short term steroid treatment, are suggested as cost-effective approaches for asthmatics with a chronic cough.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.31-57
• /
• 1991

Korean firms of all sizes, from virtually every industry, have used and are using the term "excessive competition" to describe the state of their industry and to call for government interventions. Moreover, the Korean government has frequently responded to such calls in various ways favorable to the firms, such as controlling entry, curbing capacity investments, or allowing collusion. Despite such interventions' impact on the overall efficiency on the Korean economy as well as on the wealth distribution among diverse groups of economic agents, the term "excessive competition", the basis for the interventions, has so far escaped rigorous scrutiny. The objective of this paper is to clarify the notion of "excessive competition" and "over-investment" which usually accompanies "excessive competition", and to examine the circumstances under which they might occur. We first survey the cases where the terms are most widely used and proceed to examine those cases to determine if competition is indeed excessive, and if so, what causes "excessive competition". Our main concern deals with the case in which the firms must make investment decisions that involve large sunk costs while facing uncertain demand. In order to analyze this case, we developed a two period model of capacity precommitment and the ensuing competition. In the first period, oligopolistic firms make capacity investments that are irreversible. Demand is uncertain in period 1 and only the distribution is known. Thus, firms must make investment decisions under uncertainty. In the second period, demand is realized, and the firms compete with quantity under realized demand and capacity constraints. In the above setting, we find that there is "no over-investment," en ante, and there is "no excessive competition," ex post. As measured by the information available in period 1, expected return from investment of a firm is non-negative, overall industry capacity does not exceed the socially optimal level, and competition in the second period yields an outcome that gives each operating firm a non-negative second period profit. Thus, neither "excessive competition" nor "over-investment" is possible. This result will generally hold true if there is no externality and if the industry is not a natural monopoly. We also extend this result by examining a model in which the government is an active participant in the game with a well defined preference. Analysis of this model shows that over-investment arises if the government cannot credibly precommit itself to non-intervention when ex post idle capacity occurs, due to socio-political reasons. Firms invest in capacities that exceed socially optimal levels in this case because they correctly expect that the government will find it optimal for itself to intervene once over-investment and ensuing financial problems for the firms occur. Such planned over-investment and ensuing government intervention are the generic problems under the current system. These problems are expected to be repeated in many industries in years to come, causing a significant loss of welfare in the long run. As a remedy to this problem, we recommend a non-intervention policy by the government which creates and utilizes uncertainty. Based upon an argument which is essentially the same as that of Kreps and Wilson in the context of a chain-store game, we show that maintaining a consistent non-intervention policy will deter a planned over-investment by firms in the long run. We believe that the results obtained in this paper has a direct bearing on the public policies relating to many industries including the petrochemical industry that is currently in the center of heated debates.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.