• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.589-592
• /
• 2001

Generally, hanger insulator for polymer arrestor have to be good insulation properties and mechanical strength and weatherability, But many remark and repairs have been to think about low cost and light weight. The Paper is used Polymer arrestor for post and performance analysis and mechanical strength insulator hanger according to development of simplest product. To enhance the efficiency of experimental modal analysis, we proposed the process which is the selection of the locations and the number of measurement points for pre-test.

• 대한산업공학회지
• /
• 제8권2호
• /
• pp.33-36
• /
• 1982

This paper considers preventive maintenance policies for a system with two types of units which is subject to deterioration. Two generalized models are investigated ; a preventive maintenance policy based on the cumulative operating time and a policy based on the number of minimal repairs performed. Optimal preventive maintenance policies which minimize the expected average cost per unit time including the earning loss due to the deterioration are discussed and some numerical examples are given.

• 대한산업공학회지
• /
• 제13권2호
• /
• pp.59-63
• /
• 1987

An age replacement policy is considered for a system under a stepdown warranty. It is assumed that only minimal repairs are performed for failures occurred before age T.A unique optimal value of T which minimiges the expected cost rate is obtained. The cases of the free replacement warranty, prorata warranty and hybrid warranty are also considered and some numerical examples are given.

• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.427-436
• /
• 2017

Concrete technologists have used ultrasonic pulse velocity test for decades to evaluate the properties of concrete. However, the presented research work focuses on the use of ultrasonic pulse velocity test to study the degradation in steel-concrete bond subjected to increasing loading. A detailed experimental investigation was conducted by testing five identical beam specimens under increasing loading. The loading was increased from zero till failure in equal increments. From the experimentation, it was found that as the reinforced concrete beams were stressed from control unloaded condition till complete failure, the propagating ultrasonic wave velocity reduced. This reduction in wave velocity is attributed to the initiation, development, and propagation of internal cracking in the concrete surrounding the steel reinforcement. Using both direct and semidirect methods of testing, results of reduction in wave velocity with evidence of internal cracking at steel-concrete interface are presented. From the presented results and discussion, it can be concluded that the UPV test method can be successfully employed to identify zones of poor bonding along the length of reinforced concrete beam. The information gathered by such testing can be used by engineers for localizing repairs thereby leading to saving of time, labor and cost of repairs. Furthermore, the implementation strategy along with real-world challenges associated with the application of the proposed technique and area of future development have also been presented.

• Architectural research
• /
• 제19권4호
• /
• pp.101-108
• /
• 2017

The use of the air conditioner is increasing due to the rise of the outdoor temperature during summer, and the problems of the fire and the cooling performance deterioration are caused due to lack of maintenance of the outdoor unit. In particular, overall performance of cooling system and efficiency in outdoor units have been degraded due to an intake of high-temperature outdoor air thereby increasing cooling energy and operating cost. Thus, this study aimed to increase efficiency of outdoor units by evaporating and cooling intake air through mist spray at the intake port surface in the outdoor unit. The measurements results showed that total power consumption of misting outdoor unit compared to that of conventional outdoor units was reduced by 21% approximately, and total power consumption of the entire system including pump was reduced by 16.7%. In addition, the operating cost including water use was reduced by 13.5% approximately. In summary, if a mist-spray nozzle kit is installed in air-cooled outdoor units, the reduction in the usage of cooling energy and operating cost will be achieved without replacement of existing cooling systems or a large scale of repairs.

• 전기학회논문지P
• /
• 제66권3호
• /
• pp.123-128
• /
• 2017

Electric utilities has been considered the necessity to introduce AM(asset management) of electric power facilities in order to reduce maintenance cost of existing facilities and to maximize profit. In order to make decisions in terms of repairs and replacements for power transformers, not only measuring by counting parts and labor costs, but comprehensive comparison including reliability and cost is needed. Therefore, this study is modeling input cost for power transformer during its entire life and also the life cycle cost (LCC) technique is applied. In particular, this paper presents an application of heuristic harmony search(HS) optimization algorithm to the convergence and the validity of economic life assessment of power transformer from LCC technique. This recently developed HS algorithm is conceptualized using the musical process of searching for a perfect state of harmony. It uses a stochastic random search instead of a gradient search so that derivative information is unnecessary. The effectiveness of the proposed identification method has been demonstrated through an economic life assessment simulation of power transformer using HS optimization algorithm.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.181-188
• /
• 2019

The maintenance of school building is pivotal issue. However, it is difficult to obtain basic analysis data for LCC(Lifecycle Cost) analysis and maintenance planning of school building. Therefore, this study proposed System Dynamics(SD) techniques to make maintenance decisions for school building. The interaction between the major parameters related to the aging of a building, maintenance activities, and cost were expressed in Causal Loop Diagram. Based on this, the formula for the relationship between causal maps was defined and converted to Stock and Flow Diagram. Through the completed SD model the 50-year plan of 214 educational building were tested by considered in account budget, maintainability, and budget allocation opinions. As a result, the integrated SD model demonstrated that it can support strategic decision making by identifying the status class and LCC behavior of school buildings by scenario. According to the scenario analysis, the rehabilitation action of preventive maintenance that primarily repairs the buildings in condition grade C showed the best performance improvement effect relative to the cost. Therefore, if the proposed SD model is expanded to consider the effects of other educational policies, the crucial performance improvement budget can be estimated in the long-term perspective.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.239-246
• /
• 2017

콘크리트 구조물은 목표내구수명동안 초기의 시공에 따른 내구수명과 보수를 통한 내구수명 확보를 통하여 성능을 유지한다. 결정론적인 방법에서는 내구한계에 이르면 보수횟수에 따라서 경비 및 탄소량이 계단식으로 증가하지만, 확률론적인 방법을 이용할 경우, 보수 경비와 탄소량을 연속적으로 도출할 수 있으며, $CO_2$의 흡착을 고려할 경우, 더욱 탄소량을 감축시킬 수 있다. 본 연구에서는 탄산화에 노출된 지하구조물에 대하여 결정론 및 확률론적인 방법을 배경으로 보수시기와 사용기간에 따른 흡착/발생 $CO_2$량을 평가하였다. 탄산화 깊이에 따른 $CO_2$흡착을 고려한 해석은 초기시공 및 보수재의 내구수명의 증가에 따라 탄소저감에 매우 효과적임을 나타내었다. 또한 초기 시공재료 및 보수재의 내구수명 변동성을 정의할 수 있다면, 확률론적 기법에서는 보수횟수를 감소시킬 수 있으므로 경비 및 $CO_2$저감에 효과적인 기법이 될 수 있다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.121-129
• /
• 2005

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate of amount proportional to the failure intensity, which increases since the last PM and slows down the wear-out speed to that of new one. And the proportion of reduction in hazard rate decreases with the number of PMs. Our model is similar to $ARI_1$ proposed by Doyen and Gaudoin(2004) in the sense of reduction of hazard rate. Our model has totally different wear-out pattern of hazard rate after PM's, however, and the proportion of reduction depends on the number of PM's. Assuming that the system undergoes only minimal repairs at failures between PM's, the expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.

• 대한가정학회지
• /
• 제37권2호
• /
• pp.127-144
• /
• 1999

The purposes of this study were to identify the housing maintenance cost, imputed rent fee and total housing cost of households living in rental house, to analyze the factors related to their housing maintenance cost, imputed rent fee and total housing cost and to investigate the factors contributing to total housing cost to total household income ratio. The data used for these purposes, was 97 KHPS of Daewoo Economic Research Institute. Sample size of households living in rental house, was 663. Statistics performed for the analysis were frequencies, percentiles, t-test, Lorenz cutie and Gini coefficient, Tobit analysis, OLS and Logistic analysis. The results of this study were as fellows: First, monthly cost of monthly rent & maintenance and repairs of households living in rental house with a deposit was lower than rental house, while the imputed rent fee of households living rental house with a deposit was higher than monthly rent households'And, total housing cost of households living in rental house with a deposit was higher than monthly rent households'. Second, Gini coefficient of the housing maintenance cost was 0.440, Gini coefficient of imputed rent fee was 0.362, and Gini coefficient of total housing cost was 0.291. Third, the variables related to their housing maintenance cost were family type, total household expenditure of socio-demographic characteristics and residence, type of rent, housing type of housing environmental factor. Also, the variables contributing to imputed rent fee were job type and educational attainment of household hearts, the number of family members, total household expenditure, residence, type of rent, housing type and tole number of rooms. In addition, the variables associated with total housing cost were job type and educational attainment of household head, total household income and residence, type of rent, housing type and the number of room. Finally, age, job type, educational attainment of household head, wife's employment status, the number of family members, family type, total household expenditure, residence, rent type of rent, housing type, the size of living space, and the number of room were significant variables contributing to total household cost to total household income ratio.