1 |
BS 1881, Part 203 (1986), "Recommendations for measurement of velocity of ultrasonic pulses in concrete", British Standards Institution, London.
|
2 |
Chang, P., Flatau, P. and Liu, S. (2003), "Health monitoring of civil infrastructure", Struct. Control Hlth. Monit., 3(2), 257-67.
|
3 |
Chao, W.T. (2015), "Local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Struct. Eng. Mech., 16(3), 449-466.
|
4 |
Cheesman, W.J. (1949), "Dynamic testing of concrete with the soniscope apparatus", Proc. Highw. Res. Board, 29, 176-189.
|
5 |
Chung, H.W. and Law, K.S. (1983), "Diagnosing in situ concrete by ultrasonic pulse technique", Concrete Int., 5(10), 42-49.
|
6 |
Daponte, P., Maceri, F. and Olivito, R.S. (1995), "Ultrasonic signal-processing techniques for the measurement of damage growth in structural materials", IEEE Tran. Instr. Measur., 44(6), 1003-1008.
DOI
|
7 |
Hamidian, M., Shariati, M., Arabnejad, M.M.K. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
|
8 |
Jones, R. (1948), The Application of Ultrasonic to the Testing of Concrete, Research, London, 383-396.
|
9 |
Jones, R. and Facaoaru, I. (1969), "Recommendations for testing concrete by the ultrasonic pulse method", Mater. Struct. Res. Test., (RILEM), 2(19), 275-287.
|
10 |
Kaplan, M.F. (1959), "The effects of age and water to cement ratio upon the relation between ultrasonic pulse velocity and compressive strength of concrete", Mag. Concrete Res., 11(32), 85-92.
DOI
|
11 |
Keating, J., Hannant, D.J. and Hibbert, A.P. (1989), "Correlation between cube strength, ultrasonic pulse velocity and volume change for oil well cement slurries", Cement Concrete Res., 19(714), 1486-1497.
|
12 |
Leslie, J.R. and Cheesman, W.J. (1949), "An ultrasonic method of studying deterioration and cracking in concrete structures", ACI J. Pr., 46(1), 17-23.
|
13 |
Malhotra, V.M. (1976), "Testing hardened concrete: nondestructive methods", ACI Monograph 9, American Concrete Institute.
|
14 |
Mandal, T., Tinjum, J. M. and Edil, T.B. (2016), "Non-destructive testing of cementitiously stabilized materials using ultrasonic pulse velocity test", Tran. Geotech., 6, 97-107.
DOI
|
15 |
Mutlib, N.K., Baharom, S.B., El-Shafie, A. and Nuawi, M.Z. (2016), "Ultrasonic health monitoring in structural engineering: buildings and bridges", Struct. Control Hlth. Monit., 23, 409-422.
DOI
|
16 |
Ongpeng, J.M., Oreta, A.W. and Hirose, S. (2016), "Effect of load pattern in the generation of higher harmonic amplitude in concrete using nonlinear ultrasonic test", J. Adv. Concrete Technol., 14, 205-214.
DOI
|
17 |
Ongpeng, J.M., Oreta, A.W., Hirose, S. and Nakahata, K. (2017), "Nonlinear ultrasonic investigation of concrete with varying aggregate size under uniaxial compression loading and unloading", J. Mater. Civil Eng., 29(2), 04016210.
DOI
|
18 |
Rehman, S.K.U., Ibrahim, Z., Memon, S.A. and Jameel, M. (2016), "Nondestructive test method for concrete bridges: A review", Constr. Build. Mater., 107, 58-86.
DOI
|
19 |
Pavlopoulou, S., Staszewski, W.J. and Soutis, C. (2013), "Evaluation of instantaneous characteristics of guided ultrasonic waves for structural quality and health monitoring", Struct. Control Hlth. Monit., 20(6), 937-955.
DOI
|
20 |
Qasrawi, H.Y. and Marie, I.A. (2013), "The use of USPV to anticipate failure in concrete under compression", Cement Concrete Res., 33(12), 2017-2021.
DOI
|
21 |
RILEM Recommendation NDT 1 (1972), "Testing of concrete by the ultrasonic pulse method", RILEM Publications, Paris.
|
22 |
Saleem, M. and Nasir, M. (2016), "Bond evaluation of concrete bolts subjected to impact loading", J. Mater. Struct., 49(9), 3635-3646.
DOI
|
23 |
Saleem, M. and Tsubaki, T. (2010), "Multi-layer model for pull-out behavior of post-installed anchor", Proceedings of the FRAMCOS-7, Fracture Mechanics of Concrete Structures, Aedificatio, Germany, 2, 823-830.
|
24 |
Saleem, M., Al-Kutti, W., Al-Akhras, N. and Haider, H. (2016), "Non-destructive testing method to evaluate the load carrying capacity of concrete anchors", J. Constr. Eng. Manage., 142(5), 17-29.
|
25 |
Selleck, S.F., Landis, E.N., Peterson, M.L., Shah, S.P. and Achenbach, J.D. (1998), "Ultrasonic investigation of concrete with distributed damage", ACI Mater. J., 95(1), 27-39.
|
26 |
Sounthararajan, V.M. and Sivakumar, A. (2012), "Ultrasonic tests on setting properties of cementitious systems", ARPN J. Eng. Appl. Sci., 7(11), 1424-35.
|
27 |
Shah, A.A. and Ribakov, Y. (2008), "Non-linear non-destructive evaluation of concrete", Constr. Build. Technol. J., 2, 111-115.
DOI
|
28 |
Shah, A.A. and Ribakov, Y. (2009), "Non-linear ultrasonic evaluation of damaged concrete based on higher order harmonic generation", Mater. Des., 30, 4095-4102.
DOI
|
29 |
Sharma, S. and Mukherjee, A. (2015), "Ultrasonic guided waves for monitoring corrosion in submerged plates", Struct. Control Hlth. Monit., 22(1), 19-35.
DOI
|
30 |
Shih, H.W., Thambiratnam, D.P. and Chan, T.H.T. (2013), "Damage detection in slab-on-girder bridges using vibration characteristics", Struct. Control Hlth. Monit., 20(10), 1271-1290.
DOI
|
31 |
Tahar, H.D., Abdebasset, C. and Belkacem, A. (2016), "Interfacial stresses in RC beam bonded with a functionally graded material plate", Struct. Eng. Mech., 60(4), 149-169.
DOI
|
32 |
Tarun, R.N., Malhotra, M.V. and Popovics, S.J. (2004), The Ultrasonic Pulse Velocity Method, CRC Press LLC, London.
|
33 |
Umais, K., Al-Osta, M.A. and Ibrahim, A. (2017), "Modeling shear behavior of reinforced concrete beams strengthened with externally bonded CFRP sheets", Struct. Eng. Mech., 61(1), 125-142.
DOI
|
34 |
Whitehurst, E.A. (1951), "Use of soniscope for measuring setting time of concrete", Proc. ASTM, 51, 1166-1186.
|
35 |
ASTM Test Designation C 597-02 (2003), Standard Test Method for Pulse Velocity through Concrete, Annual Book of ASTM Standards, West Conshohocken, PA.
|
36 |
Whitehurst, E.A. (1966), "Evaluation of Concrete Properties from Sonic Tests", ACI Monograph 2, American Concrete Institute, 94-107.
|
37 |
Woods, K.B. and McLaughlin, J.F. (1959), "Application of pulse velocity tests to several laboratory studies of materials", Highw. Res. Board Bull., 206-219.
|
38 |
Zhu, X. and Rizzo, P. (2013), "Guided waves for the health monitoring of sign support structures under varying environmental conditions", Struct. Control Hlth. Monit., 20(2),156-172.
DOI
|
39 |
Zongping, C., Jinjun, X., Liang, Y. and Yisheng, S. (2014), "Bond behaviors of shape steel embedded in recycled aggregate concrete and recycled aggregate concrete filled in steel tubes", Struct. Eng. Mech., 17(6), 347-360.
|
40 |
ACI 228.2R-13 (2013), "Nondestructive test methods for evaluation of concrete in structures", American Concrete Institute Report, Farmington Hills, U.S.A.
|