• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2003

In spite water direct seeding cultivation of rice has advantages in terms of laborsaving and cost-down, it demonstrates uneven seedling establishment and difficult weed management. To select an applicable mat for mulching system of water seeded rice, weed occurrence, growth and yield performances of rice, and soil temperature were evaluated in several kinds of biodegradable mulching material. Field studies were conducted at the experimental farm of National Crop Experiment Station in 1999 and 2000. Among the mats tested in 1999, Safer-mat had the greatest effect on inhibiting weed occurrence and Lawn-mat demonstrated the least efficacy of weed control (EWC) value. In Safer-mat treatment, Ludwigia prostrata was the dominant weed species but Echinochloa crus-galli was not observed. Different kinds of mulching material from the mats studied in 1999 were tested in 2000. Biodegradable polyester (PES) coated on the recycled paper for newspaper press (RP) treatments showed similar or higher EWC values than non-mulched broadcast seed rice with 2 times of herbicide application (BC-herbicide) and Safer-mat that was the most effective mat on preventing weed appearance in 1999. Immediately after mat mulching on the surface of paddy soil, five pregerminated rice seeds were manually sown in each 3cm-hole formerly punctured at 30${\times}$14 cm spacing in 2000. All the 3 kinds of mulching material tested in 2000 had better seedling stand than BC-herbicide treatment. Rice yield in PES coated with 10 thickness on RP (PES10 $\mu\textrm{m}$＋RP) was a little higher than in BC-herbicide treatment but the former produced less panicles in unit land area than the latter. PES10 $\mu\textrm{m}$＋RP demonstrated a great effect on raising soil surface temperature than non-mulching treatment throughout the period of seedling establishment.

• Survey Research
• /
• v.6 no.1
• /
• pp.63-81
• /
• 2005

A survey method in Korea has being developed rapidly since a survey company was established in 1968. In latest, the CATI, internet survey, Notebook, PDA survey methods are being utilized in accordance with communication development. This article focuses on the practical use and the strength and weakness of the PDA survey solution which employs 'KISS' system designed by KRIVET itself. The survey using PDA has, on the one hand, such strengths as follows : 1) efficient field control, 2) reduction of time for verifying data and generation of proper data 3) shortening survey duration from intial survey to data completion, 4) cutting down survey personnel and cost. On the other hand, survey using PDA has the following weakness: 1) limitation of questionnaire expression, 2) increasing time for survey, 3) communication barrier in some regions.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.481-486
• /
• 2013

An electromagnetic launcher (EML) system accelerates and launches a projectile by converting electric energy into kinetic energy. There are two types of EML systems under development: the rail gun and the coil gun. A railgun comprises a pair of parallel conducting rails, along which a sliding armature is accelerated by the electromagnetic effects of a current that flows down one rail, into the armature and then back along the other rail, but the high mechanical friction between the projectile and the rail can damage the projectile. A coil gun launches the projectile by the attractive magnetic force of the electromagnetic coil. A higher projectile muzzle velocity needs multiple stages of electromagnetic coils, which makes the coil gun EML system longer. As a result, the installation cost of a coil gun EML system is very high due to the large installation site needed for the EML. We present a coil gun EML system that has a new structure and arrangement for multiple electromagnetic coils to reduce the length of the system. A mathematical model of the proposed coil gun EML system is developed in order to calculate the magnetic field and forces, and to simulate the muzzle velocity of a projectile by driving and switching the electric current into multiple stages of electromagnetic coils. Using the proposed design, the length of the coil gun EML system is shortened by 31% compared with a conventional coil gun system while satisfying a target projectile muzzle velocity of over 100 m/s.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.147-152
• /
• 2004

To increase the utilization of farming lard and the income of farmers four cropping systems by introducing two crops in the cultivation of sesame and perilla were tested from May, 2001 to June, 2002. Weed occurrence was observed abunantly at the in barley＋sesame cropping system. Among cropping systems, weed in barley+sesame was greater in post-crop than in pre-crop, but other cropping systems were in pre-crop. Pre- or post-crops at the barley＋sesame, sesame+chinese cabbage showed good growth. The income of cropping system containing sesame was higher 21％ and 61％ in barley＋sesame and sesame＋chinese cabbage, than in sesame and perilla mono-crop systems respectively. The sesame＋chinese cabbage was labor-saying and cost down cropping system, because polyethylene film of pre-crop was reused in post-crop. But when perilla was introduced as post-crop of sesame, the delayed seed time resulted in decreased growth and grain yield. Soil physical properties were improved at the sesame＋chinese cabbage and barley＋sesame cropping systems.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.129-156
• /
• 2010

Since the 1970s, international construction employers have commonly requested first demand guarantees upon their contractors as a form of security for due performance of their works. Contractors prefer the greater protection offered by more traditional forms of security requiring presentation of an arbitral award or other evidence of the caller's entitlement to compensation. Many contractors nonetheless feel that they have no alternative but to provide these unconditional guarantees in order to compete. However, these unconditional first demand guarantees are controversial and have given rise to numerous disputes both in arbitration and litigation. Disputes arising from first demand guarantees can be broken down into a) applications to prevent a perceived fraudulent or otherwise unfair or improper calling of a guarantee, b) claims arising from such abusive calls and c) claims relating to the consequences of such calls even if the call itself may not be abusive as such. The contractors should carefully assess the risk of an abusive call being made bearing in mind the difficulties he may face in seeking to prevent such a call. He should also bear in mind the difficulties, delays and cost he is likely to encounter in seeking to recover any monies wrongfully called. One option would be to provide that the call can only be made once and to the extent that the employer's damages have been assessed or even incurred or even for the default to have been established by an arbitral tribunal or court. Another option would be to provide that any call be accompanied by a decision of a competent and impartial third party stating that the contractor is in breach. For example, such a requirement could be incorporated into a construction contract based on the FIDIC Conditions by submitting this decision to a Dispute Adjudication Board. Another option would be to provide for the "ICC Counter-Guarantee Scheme". In sum, there would appear to be room for compromise between the employer and the contractor in respect of first demand guarantees by conditioning the entitlement to call such guarantees to the determination of a competent and impartial third party.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.3 s.18
• /
• pp.23-28
• /
• 2005

This study defined engineering mechanism and compensation method to establish reference pressure of smoke control zone with atmospheric pressure that is compensated for temperature. The reliable pressure differential sensor was developed by establishing the specifications, algorithms and constructing engineering data. The development of pressure differential sensor can cut down number of processes, manufacturing and installation cost by removing pressure measurement pipe established separately for non smoke control zone, and improve the accuracy of pressure differential by embedding pressure measurement ports for non smoke control zone. More correct and reliable pressure differentials can be obtained by the central control rather than the existent individual control. This will provide the basics and the flexibility to the integral smoke control system and accordingly improve the performance of disaster prevention.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.319-324
• /
• 2003

In general industrial rotating machinery is operated under 3,600 rpm as rotating speed and designed to have critical speed that is above operating speed. So, there was no problem to operate rotating machine under critical speed. But nowadays, they should be operated more than the frist critical speed as usual with the trend of high speed, large scale and hish precision in industries. In case of the large rotor assembly as the trend of large scale, using fitting method of disk or cylinder on shaft is rising for the convenience of assembly and cutting down of manufacturing cost. The shrink fitting is used to assemble lamination part on shaft for manufacturing of rotor of motor or generator in many cases and also is widely used for other machinery. In rotating system, which is compose of rotor and bearing, the critical speed is determined from inertia and stiffness for the rotor and bearings. In case of fitting assembly, analysis and design of the rotor is not easy because the rotor stiffness is determined depend on a lot of factors such as shaft material/dimension, disk material/dimension and assembled interference etc. Therefore designer who makes a plan for hish-speed rotating machine should design that the critical speed is located out of operating range, as dangerous factors exist in it. In order to appropriate design, an accurate estimation of stiffness and damping is very important. The stiffness variation depend on fitting interference is a factor that changes critical speed and if it's possible to estimate it, that Is very useful to design rotor-bearing system. In this paper, the natural frequency variation of the rotor depends on fitting interference between basic shaft and cylinder is examined by experimentation. From the result, their correlation is evaluated quantitatively using numerical analysis that is introduced equivalent diameter end the calculation criteria is presented for designer who design fitting assembly to apply with ease for determination of appropriate interference.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.1-29
• /
• 2002

The main objective of this research aims at analyzing efficiency of government financial transfers(GFTs) to the Korean fisheries sector, using the Linear Structural Relations model(i.e., LISERL model) and the field survey data. Most policies of GFTs tend to be implemented to protect industries with weak competitive advantages such as infant and/or primary industries. Specific policy instruments include income transfers, government loans with lower interest rates, taxes and the like. Fishing activities are made at a highly changeable natural environment of the ocean with a great amount of risk and uncertainty. Fishing households make their livelihood under the small-scale fisheries. Such fisheries and fishing households have also a relatively weak market power. Because of these fisheries characteristics most coastal states have adopted a variety of government support programs. However, despite such a huge government support, during the past several decades the world fishing communities have seen a tendency of continuous fishereis resource overexploitation. For this resason there have been hot debates over the government support policies for fisheries through OECD, FAO, WTO, and UNEP. In general, policy evaluations tend to be made on the basis of benefit-cost(B/C) analysis. However, the B/C analysis may produce results quite different from real ones primarily due to many unmeasurable effects. Thus, the authors composed simple questionaires and let fishermen, government officials and academic people answer the questions. The survery was made in several ways such as post-mail and personal/group interviews. In recent years, for analysis of policy performances and effectiveness, the LISREL model has often been used, which consists of structural and measurement eqquations. This model has a good advantage of transforming unobservable variables to observable ones so that it helps construct endogenous cause and effect relationships among relevant variables. The evaluation was done from the two aspects: policy results and policy effectiveness. The policy result evaluation showed that there is a need for improvement for policy problem perception and decision-making process, while the policy effect evaluation suggested that the policy goals were successfully achieved and social justice was improved from the perspective of the entire society as well. However, the research results showed that the GFT policies rendered little contrubtion to narrowing down the gap between GFT beneficiaries and non-beneficiaries incomes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.73-78
• /
• 2018

In this paper, we consider a system where multiple sources are encrypted in separated nodes and sent through their respective public communication channels into a joint sink node. We are interested at the problem on protecting the security of an already existing system such above, which is found out to have correlated encryption keys. In particular, we focus on finding a solution without introducing additional secret keys and with minimal modification to minimize the cost and the risk of bringing down an already running system. We propose a solution under a security model where an eavesdropper obtains all ciphertexts, i.e., encrypted sources, by accessing available public communication channels. Our main technique is to use encoders of universal function to encode the ciphertexts before sending them to public communication channels.