• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.759-761
• /
• 2016

Recent changes in the information security environment have led to persistent attacks on intelligent assets such as cyber security breaches, leakage of confidential information, and global security threats. Since existing information security systems are not adequate for Advanced Persistent Threat; APT attacks, bypassing attacks, and attacks on encryption packets, therefore, continuous monitoring is required to detect and protect against such attacks. Accordingly, this paper suggests an operation plan for managing an information security system to block the attack routes of advanced persistent threats. This is achieved with identifying the valuable assets for prevention control by establishing information control policies through analyzing the vulnerability and risks to remove potential hazard, as well as constructing detection control through controlling access to servers and conducting surveillance on encrypted communication, and enabling intelligent violation of response by having corrective control through packet tagging, platform security, system backups, and recovery.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.04a
• /
• pp.29-37
• /
• 2004

Maintenance are actions (or activities) needed to (i) control equipment degradation and failures and (ii) to restore a failed equipment to operational state. The former is termed Preventive Maintenance (PM) and the latter as Corrective Maintenance (CM).(omitted)

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.411-420
• /
• 2013

Recently, Korean system operating conditions have gradually approached an upper limit. When a contingency occurs, the power system may have no solutions. Different from the cases of bad initial guesses or the solutions are too close to the solvability boundary in which numerical methods can be applied, for unsolvable cases, the only way to restore solvability would be structure modifications. In this paper, a new approach for corrective and preventive control to such cases is proposed in two steps: (i) finding any solution regardless its feasibility; (ii) for the infeasible solution, make it feasible with additional modifications at load buses having Distributed Energy Resources. The test case built based on the peak load profile of 2008 by KEPCO including 1336 buses is analyzed. Since reactive power compensation is optimized to restore solvability, all demands are met, therefore no blackouts happen. The proposed method was integrated in the LP program designed by power21 Corporation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.391-391
• /
• 2000

Manufacturing process generally exhibits major or minor variations due to deviation of raw materials, equipment degradation, controller malfunction, and so on. Extensive research based on multivariate statistical process control has been done to monitor the unstable states and indicate a corrective action. A prototype of intelligent operation support system ("ISYS-MSPC") has been developed as a tool that supports the enhanced operation to guarantee the high productivity and a uniform high quality product. This system has been applied to the industrial batch and continuous processes and its performance has been validated .

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.929-938
• /
• 2009

This paper presents a novel control methodology for communication network based nonlinear systems with time delay nature. We construct a nominal nonlinear control law for representing a linear model and a reset control system which is aimed for corrective control strategy to compensate system error due to uncertain time delay through wireless communication network. Next, online neural control approach is proposed for overcoming nonstationary statistical nature in the network topology. Additionally, DBN (Dynamic Bayesian Network) technique is accomplished for modeling of its dynamics in terms of casuality, which is then utilized for estimating prediction of system output. We evaluate superiority and reliability of the proposed control approach through numerical simulation example in which a nonlinear inverted pendulum model is employed as a networked control system.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.65-73
• /
• 2009

Purpose: This study was conducted to investigate the changes in distance refractive power and reading addition that occur after wearing corrective glasses for prebyopia. Methods: The subjects aged 42 to 75 years who had no ophthalmologic diseases and did not undergo cataract or retina surgery, had a corrected visual acuity of 20/20 and did not have a previous history of wearing corrective glasses for presbyopia. These subjects were divided into 3 groups: the control, reading spectacles and multifocals wearing group and they were measured for distance refractive power and reading addition at their visit. The maximum follow-up period was 73 months. Results: As for distance refractive power, the power tends to shift to hyperopia depending on age (r=0.486, p<.001) and 50.0% of the subjects increased plus power during this study period. Plus power Increments per year in distance refractive power in the reading spectacle wearing group were significantly different with control and multifocals wearing group (p<.05). On the other hand, the multifocals wearing group's increments were not different with control. Increments in reading addition were also increased in the reading spectacles group than in the control and multifocals wearing groups (p<.05). Conclusions: The age related hyperopic shift could be occurred in the elderly people, routine refraction is mandatory. And reading spectacles could induce an age related hyperopic shift and the additional need for reading addition that the prescription of multifocals may reduce changes in distance refractive power and reading addition.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.49-55
• /
• 2012

Asynchronous counters, where the counter value is changed not by a synchronizing clock but by outer inputs, are used in various modern digital systems such as spaceborne electronics. In this paper, we propose a scheme of fault tolerance for asynchronous counters with critical races caused by total ionizing dose (TID) in space. As a typical design flaw of asynchronous digital circuits, critical races cause an asynchronous circuit to show non-deterministic behavior, i.e., the next stable state of a state transition is not a fixed value but may be any value of a state set. Using the corrective control scheme for asynchronous sequential machines, this paper provides an existence condition and design procedure for a state feedback controller that can invalidate the effect of critical races. We implement the proposed control system in VHDL code and conduct experiments to demonstrate that the proposed control system can overcome critical races.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.980-984
• /
• 1990

In order to find the optimal control law for the precise trajectory tracking of a robot manipulator, a perturbational control method is proposed based on a linearized manipulator dynamic model which can be obtained in a very compact and computationally efficient manner using the dual number algebra. Manipulator control can be decomposed into two parts: the nominal control and the corrective perturbational control. The nominal control is precomputed from the inverse dynamic model using the quantities of a desired trajectory. The perturbational control is obtained by applying the second-variational method on the linearized dynamic model. Simulation results for a PUMA-560 robot show that, by using this controller, the desired trajectory tracking performance of the robot can be achieved, even in the presence of large initial positional disturbances.

• Nutrition Research and Practice
• /
• v.4 no.2
• /
• pp.163-172
• /
• 2010

The purposes of this study were to assess hospital foodservice quality and to identify causes of quality problems and improvement strategies. Based on the review of literature, hospital foodservice quality was defined and the Hospital Foodservice Quality model was presented. The study was conducted in two steps. In Step 1, nutritional standards specified on diet manuals and nutrients of planned menus, served meals, and consumed meals for regular, diabetic, and low-sodium diets were assessed in three general hospitals. Quality problems were found in all three hospitals since patients consumed less than their nutritional requirements. Considering the effects of four gaps in the Hospital Foodservice Quality model, Gaps 3 and 4 were selected as critical control points (CCPs) for hospital foodservice quality management. In Step 2, the causes of the gaps and improvement strategies at CCPs were labeled as "quality hazards" and "corrective actions", respectively and were identified using a case study. At Gap 3, inaccurate forecasting and a lack of control during production were identified as quality hazards and corrective actions proposed were establishing an accurate forecasting system, improving standardized recipes, emphasizing the use of standardized recipes, and conducting employee training. At Gap 4, quality hazards were menus of low preferences, inconsistency of menu quality, a lack of menu variety, improper food temperatures, and patients' lack of understanding of their nutritional requirements. To reduce Gap 4, the dietary departments should conduct patient surveys on menu preferences on a regular basis, develop new menus, especially for therapeutic diets, maintain food temperatures during distribution, provide more choices, conduct meal rounds, and provide nutrition education and counseling. The Hospital Foodservice Quality Model was a useful tool for identifying causes of the foodservice quality problems and improvement strategies from a holistic point of view.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.146-153
• /
• 1997

The microsporidian infection with Nosema bombycis, reconfirmed its high virulence and transovarial tranmissibility, however, the characteristic symptom of the spots like pepper grains on the diseased larval skin was no more recognized by present varieties of the silkworm. Transovarial transmission rate detected from moth was above 90% in dead eggs or dead larvae in the rearing by mulberry leaves, 80% in the newly hatched larvae starved to death. Transovarially transmitted N. bombycis was easily observed from dead eggs and larvae, and were suggested an individual inspection of a few of dead eggs for detection of the pathogenic spores. The progeny population provided indicative factors on the sampling of predictive and corrective inspection. The higher concentration of N. bombycis spores included in the hindabdormal part of infected moth, applicative on the simple method of indivisual moth inspection. For the predictive inspection of growned 5th-instar larvae, N. bombycis infection was detectable without microscopic observation by the unique symptom of turbid milky-white spots on the silk gland. Inspection of the meconia artificially discharged from silkworm moth, was also succesful of microscopic observation before crossing, without killing or homogenize the moths. The results provided a basis of rational methods for the inspection of N. bombycis infection of the silkworm.