• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.291-295
• /
• 2013

Purpose: The purpose of this study was to investigate the effect of under and over refractive correction on visual acuity performance and the variation of the visual performance measurement using two different visual acuity charts. Methods: Ten young adults, aged between 19 and 25 years old, were recruited. Inclusion criteria: no history of ocular injury or pathology with a best-corrected visual acuity of 6/6 on dominant eye. The over and under refractive corrections were induced using minus and plus spherical ophthalmic lenses in 0.50 D steps up to 3.00 D; as well as using three axis orientations of cylindrical ophthalmic lenses ($45^{\circ}$, $90^{\circ}$ and $180^{\circ}$) in 0.50 D steps. The variation of visual acuity performance measurements was investigated using Bailey-Lovie LogMAR chart and Landolt C chart. Results: The visual acuity changes with lenses were significantly different between two charts [F = 49.15, p < 0.05 with plus spherical ophthalmic lenses and F = 174.38, p < 0.05 with minus spherical ophthalmic lenses]. The visual acuity changes with three different cylindrical axis showed no significant difference between Bailey-Lovie LogMAR chart [F = 2.35, p > 0.05] and Landolt C chart [F = 3.12, p = 0.05]. Conclusions: The over and under refractive correction affected the visual acuity performance differently. The Landolt C chart and Bailey-Lovie LogMAR chart demonstrated variation in measurements.

• Journal of Veterinary Clinics
• /
• v.4 no.1
• /
• pp.395-401
• /
• 1987

In this study, the effect of ambient temperature on the 45$^{\circ}$micro ESR/hr of cattle blood were observed, and a correction chart for correcting observed values at any ambient temperature to standard values at 20$^{\circ}C$ was plotted. Besides, the effect of storage temperature of blood on the 45$^{\circ}$micro ESR/hr was surveyed. The results were as follows: 1. The values of the 45$^{\circ}$micro ESR/hr were increased as the ambient temperature were elevated(P<0.01), and lower the value of PCV, higher the effect of temperature on the 45$^{\circ}$micro ESR/hr was observed(P<0.01). 2. Regression of values of 45$^{\circ}$micro ESR to ambient temperature in all the group of different level of blood PCV showed linear regression with the highly significant coefficient of correlation. With the results, correction chart was drawn as in Fig. 1. 3. In the purpose to verify the reliability of correction chart, observed values of 45$^{\circ}$micro ESR/hr in field(out door) were corrected to values at 20$^{\circ}C$ by the correction chart(Fig. 1), comparing with the observed values at 20$^{\circ}C$ of standard temperature. No significant differences were found between two groups mentioned above. 4. In the study on the effect of storage temperature of the blood on the 45$^{\circ}$micro ESR/hr, group of storage temperature at 5$^{\circ}C$ showed statistically no significant differences untill 24 hours in contrast with standard control group.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.55-64
• /
• 1996

A numerical model of refrigerant flow through a capillary tube is developed, which considers the effects of underpressure for vaporization, kinetic energy, and roughness of capillary tube. The numerical model is based on homogeneous flow assumptions for the two-phase flow region. A characteristic chart of HFC refrigerants flow through capillary tubes and correction factor chart of geometry and relative roughness of capillary tube to select a proper capillary for refrigerating machines using alternative refrigerants is presented by this numerical model.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.61-64
• /
• 2000

In order to analyse the effect of the fluid viscosity changes on the centrifugal pump, the computer simulation method and the performance correction chart are used. The centrifugal pump is designed using the traditional method, and the 3D computational grid is generated for the impeller and casing. Working fluids are water, high viscous oil and muddy water. The viscosity of muddy water is measured by the unsteady capillary tube viscometer. The pump performances are predicted well through the computer simulation. The performance curves of head and efficiency for oil and muddy water are decreased. The torques of oil and muddy water, which is calculated by performance correction chart are predicted at a lower value than the computer simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1563-1571
• /
• 2003

This paper is the second part of several companion papers which compare the method of Air-fuel ratio(AFR) determination. In the previous paper, Eltinge chart was applied to the arbitrary fuel composition and the charts for gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane and butane were illustrated. In Eltinge chart, however, unburned hydrocarbon (UHC) is not used for determination of AFR. For improving accuracy, Eltinge suggested UHC compensation after the AFR reading in the chart. This compensation reduced the difference between real and reading value. In the compensation, however, the correction of oxygen and carbon dioxide is uncertain and there might be a mistake in conversion of UHC reading value. Therefore, the error is overestimated comparing with Spindt one which is most widely used. In addition, there is no comparison of the value with other useful methods. In this paper, the compensation of unburned HC was performed in Eltinge chart and the compensated value was compared with Spindts formula over wide range of AFR. The objects of investigating fuel are gasoline, methanol, NG and LPG. The result shows that Eltinge and Spindt method is flawlessly compatible and the difference between the two methods is under 0.3% in a λrange from 0.9 to 1.7. The method fur debugging instrumentation error is also presented.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.549-554
• /
• 2013

Purpose: To determine the minimal illumination for visual acuity with the decimal vision chart and individual difference with varying contrast and illumination. Methods: Landolt's vision chart with 10 different grade of contrast was made. Minimal illumination was measured for 69 eyes using 100% contrast vision chart. Minimal contrast for identifying the chart was measured in conditions of the minimal illumination and 230 lx, respectively. Results: Minimal illumination was gradually increased with decrease of the chart size. Mean of minimal illumination to identify the 1.0 visual acuity was $74.39{\pm}25.90$ lx with range of 17~107 lx. In conditions of the minimal illumination and 230 lx, the minimal contrast for identifying the chart were gradually increased with decrease of the chart size in both conditions, the those deviation for 69 eyes was also increased. Conclusions: For refractive correction, examiners need to consider the individual difference for identifying the visual chart according to illumination and contrast.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.73-77
• /
• 2015

In this paper, we present two simulation methods to investigate the effect of excluding bit errors on generating the extrinsic information transfer (EXIT) chart for low density parity check (LDPC) and turbo codes. We utilized the simulation methods including and excluding bit errors to generate EXIT chart which was originally proposed for turbo codes. The generated EXIT charts for LDPC and turbo codes shows that the presented methods appropriately demonstrates the performance behaviours of iterative decoding for LDPC and turbo codes. Analysis on the simulation results demonstrates that the EXIT chart excluding the bit errors shows only a small part of the curves where the amount of information is too large.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.378-388
• /
• 2017

We present a graphical method for determining a pair of optical materials and powers to design an achromatic and athermal lens system with corrected Petzval curvature. To graphically obtain the solutions, a three-dimensional (3D) glass chart is proposed. Even if a particular material combination is unavailable, we can select an element suitable for a specific lens and continuously change the element powers of an equivalent single lens for aberrations correction. Thus, we can iteratively identify the materials and powers on a 3D glass chart. By designing a fisheye lens using this method, an achromatic and athermal system with flat Petzval curvature is obtained, over the specified waveband and temperature ranges.

• Journal of Broadcast Engineering
• /
• v.25 no.4
• /
• pp.598-608
• /
• 2020

In this paper, we propose a color correction technique for images acquired through a multi-view camera system for acquiring a 3D model. It is assumed that the 3D volume is captured indoors, and the position and intensity of the light is constant over time. 8 multi-view cameras are used, and converging toward the center of the space, so even if the lighting is constant, the intensity and angle of light entering each camera may be different. Therefore, a color optimization function is applied to a color correction chart taken from all cameras, and a color conversion matrix defining a relationship between the obtained 8 images is calculated. Using this, the images of all cameras are corrected based on the standard color correction chart. This paper proposed a color correction method to minimize the color difference between cameras when acquiring an image using 8 cameras of 3D objects, and experimentally proved that the color difference between images is reduced when it is restored to a 3D image.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.53-58
• /
• 2012

Purpose: The purpose of this study was to predict the amount of astigmatism through logMAR visual acuity by Jin's chart at best vision spherical power and to compare availability of astigmatism expectation by Jin's and beam project chart. Methods: LogMAR and decimal visual acuity were measured for 150 college students and visual acuity and compared the amount of astigmatism under full correction. Results: Jin's chart was showed marked differences at least more than 0.25 D intervals per line than beam project chart. Correlation with the amount of astigmatism was higher the logMAR visual acuity r = 0.8578 than decimal visual acuity r = -0.7199. Conclusions: LogMAR visual acuity at best vision spherical power was able to predict to amount of astigmatism and Jin's chart was easier than beam project chart to predict difference of each lines.