• Macromolecular Research
• /
• v.16 no.1
• /
• pp.51-56
• /
• 2008

Spherical micelles of poly(styrene-b-isoprene) (SI) diblock copolymers in selective solvents have been reported to pack onto either face-centered cubic (fcc) or body-centered cubic (bcc) lattices. The selection rule for fcc and bcc lattices has been understood in terms of the intermicellar potentials, and they have been quantified using the ratio of the corona layer thickness to the core radius, $L/R_c$, as suggested by McConnell and Gast. In order to test the validity of the McConnell-Gast criterion, this study compared the $L/R_c$ values from various solutions i.e. nine SI copolymers in several different selective solvents. The McConnell-Gast criterion was not found to be a determining factor, even though it could explain the fcc/bcc selection qualitatively. From the phase diagrams, the transition between fcc and bcc phases was also considered as a function of concentration and temperature, and their physical mechanisms are discussed based on the recent mean-field calculation reported by Grason.

• Proceedings of the PSK Conference
• /
• 2003.04a
• /
• pp.278.2-278.2
• /
• 2003

A column-switching semi-micro HPLC method with fluorescence detection was developed for the direct analysis of rebamipide in human plasma. Plasma was filtered through a 0.45 $\mu\textrm{m}$ membrane filter and 5 ${\mu}\ell$ of the filtrate was directly injected onto the pre-column. After elution of the plasma proteins to waste, the retained rebamipide and internal standard(ofloxacin) were transferred to a C18 semi-microcolumn (5$\mu\textrm{m}$, 150 ${\times}$2.0mm) where they were separated using acetonitrile-1.4％ acetic acid (40:60, v/v) as mobile phase. (omitted)

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.99-105
• /
• 2008

Core-shell structured $BaTiO_3$ powders were produced via nano-coating of $Cr_2O_3$ and $Mn_2O_3$ to barium titanate powder system for MLCCs. From preliminary experiments, the optimal solution reaction condition employing using $KMnO_4$, $K_2Cr_2O_4$ and sulfur was established. Not only powders of $Cr_2O_3$ and $Mn_2O_3$ were synthesized but also their coating on $BaTiO_3$ powders were peformed under the same reaction condition. The coating was carried out in two ways, one-step and two-step, and its results were characterized for comparison. Conclusively speaking, two oxide additives were coated onto the $BaTiO_3$ powder surface with high quality and excellent reaction yield even under mild condition, which indicates that the contents as well as the properties of additive shell layer can be precisely controlled with rather ease.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.199-205
• /
• 2009

Purpose: The purpose of this research was to evaluate the shear bond strength between zirconia core and veneer ceramic after surface treatment. Material and methods: Zirconia cores(N=40, n=10, $10mm{\times}10mm{\times}3mm$) were fabricated according to the manufacturers' instructions and ultrasonically cleaned. The veneering ceramics(thickness 3 mm) were built and fired onto the zirconia core materials. Four groups of specimens with different surface treatment were prepared. Group I: without any pre-treatment, Group II: treated with sandblasting, Group III: treated with liner, Group IV: treated with sandblasting and liner. The shear bond strength was tested in a universal testing machine. Data were compared with an ANOVA and $Scheff{\acute{e}}$ post hoc test(P=.05). Results: The shear bond strength of group VI was significantly higher than the other groups. Conclusion: Both mechanically and chemically treated simultaneously on zirconia core surface influenced the shear bond strength between the core and veneering ceramic in all-ceramic systems.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.729-732
• /
• 2012

Herein we report the in-situ synthesis and direct decoration of chalcogenide naoparticles (NPs) onto multiwalled carbon nanotubes (MWCNTs) through an ionic liquid-assisted sonochemical method (ILASM). The as-obtained MWCNT/$BMimBF_4$/CdTe, MWCNT/$BMimBF_4$/ZnTe and MWCNT/$BMimBF_4$/ZnSe nanocomposites were characterized by TEM images and EDS spectra. In particular, the morphologies of nanocomposites such as bump-like, rough, and smooth core-shell structures were strongly influenced by the type of precursors and the interactions with MWCNT. This synthetic strategy opens a new way to directly synthesize and deposit semiconducting NPs (s-NPs) onto CNTs, which consist of binary components obtained from two precursors with different reaction rates.

• Steel and Composite Structures
• /
• v.21 no.2
• /
• pp.267-287
• /
• 2016

The seismic performance of the ordinary steel reinforced concrete (SRC) columns has no significant improvement compared to the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type shaped steel were put forward on this background, and they were named as enlarging cross-shaped steel and diagonal cross-shaped steel for short. The seismic behavior and carrying capacity of new-type SRC columns have been researched theoretically and experimentally, while the shear behavior remains unclear when the new-type columns are joined onto SRC beams. This paper presents an experimental study to investigate the shear capacity of new-type SRC joints. For this purpose, four new-type and one ordinary SRC joints under low reversed cyclic loading were tested, and the failure patterns, load-displacement hysteretic curves, joint shear deformation and steel strain were also observed. The ultimate shear force of joint specimens was calculated according to the beam-end counterforce, and effects of steel shape, load angel and structural measures on shear capacity of joints were analyzed. The test results indicate that: (1) the new-type SRC joints display shear failure pattern and has higher shear capacity than the ordinary one; (2) the oblique specimens have good bearing capacity if designed reasonably; and (3) the two proposed construction measures have little effect on the shear capacity of SRC joints embedded with diagonal cross-shaped steel. Based on the mechanism observed from the test, the formulas for calculating ultimate shear capacity considering the main factors (steel web, stirrup and axial compression ratio) were derived, and the calculated results agreed well with the experimental and simulated data.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.525-529
• /
• 2017

Molybdenum oxide ($MoO_3$) offers pivotal advantages for high optical transparency and low light reflection. Considering device fabrication, n-type $MoO_3$ semiconductor can spontaneously establish a junction with p-type Si. Since the energy bandgap of Si is 1.12 eV, a maximum photon wavelength of around 1,100 nm is required to initiate effective photoelectric reaction. However, the utilization of infrared photons is very limited for Si photonics. Hence, to enhance the Si photoelectric devices, we applied the wide energy bandgap $MoO_3$ (3.7 eV) top-layer onto Si. Using a large-scale production method, a wafer-scale $MoO_3$ device was fabricated with a highly crystalline structure. The $MoO_3/p-Si$ heterojunction device provides distinct photoresponses for long wavelength photons at 900 nm and 1,100 nm with extremely fast response times: rise time of 65.69 ms and fall time of 71.82 ms. We demonstrate the high-performing $MoO_3/p-Si$ infrared photodetector and provide a design scheme for the extension of Si for the utilization of long-wavelength light.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.60-68
• /
• 2004

The core-shell polyolefin nonwovon fabric (PNF), wherein the PNF comprises at least about 60% of polyethylene having a melting temperature at ${\sim}132^{\circ}C$ and no more than about 40% of second polypropylene having a lower melting temperature at ${\sim}162^{\circ}C$. The sulfonic acid group for battery separators were prepared by radiation-induced grafting of styrene onto PNF and by the subsequent sulfonation of polystyrene graft chains. The sulfonated PNF was characterized by XPS, SEM, DSC, TGA and porosimeter. The electrochemical properties such as electrolyte retension, electrical resistance, and transport number of the $K^+ions$ were evaluated after sulfonation. It was found that the electrolyte retension increased, whereas the electrical resistance decreased with increasing sulfonic acid content. The transport number of $K^+$ in PNF with sulfonic acid of 0.22 ~ 3.60 mmol/g was to be 0.90 ~ 0.93.

• Carbon letters
• /
• v.24
• /
• pp.18-27
• /
• 2017

Multiwall carbon nanotubes (MWCNT) with two different (L/D) aspect ratios ($7{\pm}2{\mu}m/140{\pm}30nm$ and $0.5-2{\mu}m/8-15nm$) were surface treated using nitric acid ($HNO_3$) and polyethyleneimine (PEI) prior to their deposition on carbon fibers (CF). Before the hierarchical reinforcement with CF-MWCNT, the CFs were treated with 3-glycidoxypropyltrime-thoxysilane, a coupling agent (Z6040) and with poly(amidoamine) (PAMAM) a dendrimer containing an ethylenediamine core and amine surface groups. The MWCNT were deposited on the CF using two methods, by electrostatic attraction and by chemical reactions. The changes in the CF surface morphology after the MWCNT deposition were analyzed using SEM, which revealed a higher density and uniform coverage for the PAMAM-treated CF and the short MWCNTs. The interfacial adhesion of the composite materials was evaluated using the single fiber fragmentation technique. The results indicated an improvement in the interfacial shear strength with the addition of the short-MWCNTs treated with acid solutions and grafted onto the surface of the CF fiber using electrostatic attraction.

• Advanced Composite Materials
• /
• v.18 no.1
• /
• pp.1-20
• /
• 2009

This paper describes the results of experiments and numerical simulation studies on the impact and indentation damage created by low-velocity impact subjected onto honeycomb sandwich panels for application to the BIMODAL tram. The test panels were subjected to low-velocity impact loading using an instrumented testing machine at six energy levels. Contact force histories as a function of time were evaluated and compared. The extent of the damage and depth of the permanent indentation was measured quantitatively using a 3-dimensional scanner. An explicit finite element analysis based on LS-DYNA3D was focused on the introduction of a material damage model and numerical simulation of low-velocity impact responses on honeycomb sandwich panels. Extensive material testing was conducted to determine the input parameters for the metallic and composite face-sheet materials and the effective equivalent damage model for the orthotropic honeycomb core material. Good agreement was obtained between numerical and experimental results; in particular, the numerical simulation was able to predict impact damage area and the depth of indentation of honeycomb sandwich composite panels created by the impact loading.