• 한국표면공학회지
• /
• 제42권1호
• /
• pp.47-52
• /
• 2009

Cu-Ag powder having Core-Shell structure was prepared from by electroless plating method using agents such as $AgNO_3$, $NH_{4}OH$, Hydroquinone. Ag coated copper powders were analyzed using scanning electron microscopy(SEM) and energy dispersive X-ray spectrometer(EDX). The silver coating layer of copper powder was affected from various reaction conditions such as molar ratio of $NH_{4}OH$, $AgNO_3$, and pulp density. Free silver was generated below 0.1M or 0.3M and above of $NH_{4}OH$ mole ratio. Silver coating layer thickened as addition of $AgNO_3$. When the pulp density reached 12% with 0.2M $NH_{4}OH$, and 0.15M $AgNO_3$ at $4^{\circ}C$, silver was homogeneously distributed around the copper particles and free silver particles were not generated.

• 한국재료학회지
• /
• 제20권1호
• /
• pp.25-30
• /
• 2010

Si nanowire/multiwalled carbon nanotube nanocomposite arrays were synthesized. Vertically aligned Si nanowire arrays were fabricated by Ag nanodendrite-assisted wet chemical etching of n-type wafers using $HF/AgNO_3$ solution. The composite structure was synthesized by formation of a sheath of carbon multilayers on a Si nanowire template surface through a thermal CVD process under various conditions. The results of Raman spectroscopy, scanning electron microscopy, and high resolution transmission electron microcopy demonstrate that the obtained nanocomposite has a Si nanowire core/carbon nanotube shell structure. The remarkable feature of the proposed method is that the vertically aligned Si nanowire was encapsulated with a multiwalled carbon nanotube without metal catalysts, which is important for nanodevice fabrication. It can be expected that the introduction of Si nanowires into multiwalled carbon nanotubes may significantly alter their electronic and mechanical properties, and may even result in some unexpected material properties. The proposed method possesses great potential for fabricating other semiconductor/CNT nanocomposites.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.241-241
• /
• 2014

$SnO_2-core/Zn-shell$ heteronanowires were fabricated by a two-step process: thermal evaporation of Sn powders and employing a sputtering technique with a Zn target. X-ray diffraction, high-resolution transmission electron microscopy, and EDX spectra coincidentally indicated that the shell layer comprised the Zn phase. From Gaussian deconvolution studies, we observed that photoluminescence (PL) spectra consisted of yellow, green, and ultraviolet (UV) emission bands, regardless of shell-coating. We speculated the possible mechanisms of these emission peaks.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.210-211
• /
• 2002

The magnetic anisotropy of amorphous wires plays a decisive role in the giant magnetoimpedance(GMI) behavior. The magnetoelastic anisotropy caused by internal stress, that are frozen in during the fabrication process, results in an axial easy axis in the core region and in a circular easy axis in the shell region [1]. It leads to a simple domain structure consisting of circular domains in the shell and axial domains in the core. For a more realistic domain structure, it has been suggested that the helical anisotropy exists due to an internal helical stress [2]. (omitted)

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.288-288
• /
• 2013

Lithium-ion battery (LIB) is one of the most important rechargeable battery and portable energy storage for the electric digital devices. In particular, study about the higher energy capacity and longer cycle life is intensively studied because of applications in mobile electronics and electric vehicles. Generally, the LIB's capacity can be improved by replacing anode materials with high capacitance. The graphite, common anode materials, has a good cyclability but shows limitations of capacity (~374 mAh/g). On the contrary, silicon (Si) and germanium(Ge), which is same group elements, are promising candidate for high-performance LIB electrodes because it has a higher theoretical specific capacity. (Si:4200 mAh/g, Ge:1600 mAh/g) However, it is well known that Si volume change by 400% upon full lithiation (lithium insertion into Si), which result in a mechanical pulverization and poor capacity retention during cycling. Therefore, variety of nanostructure group IV elements, including nanoparticles, nanowires, and hollow nanospheres, can be promising solution about the critical issues associated with the large volume change. However, the fundamental research about correlation between the composition and structure for LIB anode is not studied yet. Herein, we successfully synthesized various structure of nanowire such as Si-Ge, Ge-Carbon and Si-graphene core-shell types and analyzed the properties of LIB. Nanowires (NWs) were grown on stainless steel substrates using Au catalyst via VLS (Vapor Liquid Solid) mechanism. And, core-shell NWs were grown by VS (Vapor-Solid) process on the surface of NWs. In order to characterize it, we used FE-SEM, HR-TEM, and Raman spectroscopy. We measured battery property of various nanostructures for checking the capacity and cyclability by cell-tester.

• 공업화학
• /
• 제32권1호
• /
• pp.28-34
• /
• 2021

SiO2/Ag 코어-쉘 나노입자를 수정된 Stöber 공정법과 물/dodecylbenzenesulfonic acid (DDBA)/cyclohexane의 역 미셀에서 acetoxime을 환원제로 사용하는 역 미셀 방법을 상호 조합하여 합성하였다. SiO2/Ag 코어-쉘은 UV-visible spectroscopy, XRD, SEM 및 TEM을 사용하여 구조, 형태 및 크기를 조사하였다. SiO2/Ag 코어-쉘의 나노입자 크기는 [물]/[DDBA]의 몰비(WR)의 값을 조절하여 제어할 수 있었다. SiO2/Ag 코어-쉘의 크기와 다분산성은 WR 값이 증가함에 따라 증가하였다. 비정질 SiO2 나노입자 위에 생성된 Ag 나노입자는 430 nm에서 강한 표면 플라즈몬 공명 (SPR) 피크를 나타내었다. SPR 피크는 나노입자 크기의 증가에 따라 장파장으로의 적색 이동을 나타내었다. 합성된 SiO2/Ag 코어-쉘을 분산시켜 70 wt% 조성의 전도성 페이스트를 제조하고, 스크린 인쇄법으로 PET 필름에 코팅하여 전도성을 조사하였다. SiO2/Ag 코어-쉘 페이스트로 코팅된 필름은 상용 Ag 페이스트에 비하여 높은 460~750 µΩ/sq 영역의 표면저항을 나타내었다.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.746-755
• /
• 2017

본 연구에서는 $CeO_2$ 표면에 $Ti(SO_4)_2$의 가수 분해를 이용하여 $TiO_2$를 성장시켜 코어-쉘 구조를 가지는 세라믹 나노입자를 합성 하였다. $CeO_2/TiO_2$ 코어-쉘 합성에서는 $CeO_2:TiO_2$의 몰비, 반응 시간, 반응 온도, $CeO_2$ 슬러리 농도, $Ti(SO_4)_2$의 pH 조절을 통하여 코어-쉘 구조를 가지는 최적의 합성 조건을 찾았다. $CeO_2:TiO_2$의 최적의 몰비는 1:0.2~1.1, 최적의 반응 시간은 24 시간, 최적의 $CeO_2$ 슬러리 농도는 1%, 최적의 반응 온도는 $50^{\circ}C$임을 알 수 있었다. $NH_4OH$ 수용액을 이용하여 $Ti(SO_4)_2$ 의 pH를 1로 맞추어 $CeO_2$ 슬러리에 적하하면 10%의 농도를 가지는 $CeO_2$ 슬러리에서도 $CeO_2/TiO_2$ 코어-쉘 나노 입자를 합성할 수 있었다. $80^{\circ}C$이상의 높은 온도에서 반응을 시키면 $CeO_2/TiO_2$ 코어-쉘 구조가 아닌 독립된 $TiO_2$ 나노 입자를 형성함을 알 수 있었다. 최적의 반응 온도는 $50^{\circ}C$로서 가장 좋은 구조의 $CeO_2/TiO_2$ 코어-쉘이 합성되었다.

• 대한화학회지
• /
• 제59권5호
• /
• pp.397-406
• /
• 2015

II-VI 족 무기 화합물 반도체인 ZnO는 폭 넓은 응용분야 때문에 많은 관심을 받고 있다. ZnO는 넓은 밴드갭(3.37 eV)과 큰 excitation binding energy(60 meV)를 가지고 있고 광학특성, 반도체, 압전특성, 자성, 항균성, 광촉매 등 여러 분야에 응용 가능한 물질로 알려져 있다. 특히 광촉매 분야에 적용할 때 재수득의 문제를 위해 자성을 갖는 물질과 core-shell 구조를 이루는 연구가 활발히 진행 되고 있다. 본 연구에서, magnetic core-shell ZnFe₂O₄@ZnO@SiO₂ nanoparticles(NPs)는 3단계 과정을 통해 성공적으로 합성하였다. 합성된 물질들의 구조적 특성을 확인하기 위해 X-ray diffraction(XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy(FT-IR)을 사용하였다. ZnFe₂O₄ spinel 구조와 ZnO wurtzite 구조는 XRD를 사용하여 확인되었고, 전구체의 농도별 분석을 통해 ZnO 생성 비율을 확인 하였다. 합성된 물질들은SEM을 통하여 표면의 변화를 확인하였다. SiO₂층의 형성과 ZnFe₂O₄@ZnO@SiO₂ NPs의 합성은 FT-IR을 통해 Fe-O, Zn-O 및 Si-O-Si 결합을 확인하였다. 합성된 물질들의 자기적 성질은 Vibrating sample magnetometer(VSM)을 사용 하여 분석하였다. ZnO층과 SiO₂ 층의 형성의 결과는 자성의 증가와 감소로 확인하였다. 합성된 ZnFe₂O₄@ZnO@SiO₂ NPs의 광촉매 효과는 오염물질 대신 methylene blue(MB)를 사용하여 UV 조사 하에 암실에서 실험하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.580-580
• /
• 2012

Heterostructures has unique and important properties, which may be helpful for finding many potential applications in the field of electronic, thermoelectric, and optoelectronic devices. We synthesized CdTe/Te core-shell heterostructures by vapor-solid process at low temperatures using a quartz tube furnace. Two step vapor-solid processes were employed. First, various tellurium structures such as nanowires, nanorods, nanoneedles, microtubes and microrods were synthesized under various deposition conditions. These tellurium nanostructures were then used as substrates in the second step to synthesize the CdTe/Te core-shell heterostructures. Using this method, various sizes, shapes and types of CdTe/Te core-shell structures were fabricated under a range of conditions. These structures were analysed by scanning electron microscopy, high resolution transmission electron microscopy, and energy dispersive x-ray spectroscopy. The vapor phase process at low temperatures appears to be an efficient method for producing a variety of Cd/Te hetero-nanostructures. In addition, the hetero-nanostructures can be tailored to the needs of specific applications by deliberately controlling the synthetic parameters.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.640-644
• /
• 2008

ZnO/ZnS core/shell nanocrystals (${\sim}5-7\;nm$ in diameter) with a size close to the quantum confinement regime were successfully synthesized using polyol and thermolysis. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analyses reveal that they exist in a highly crystalline wurtzite structure. The ZnO/ZnS nanocrystals show significantly enhanced UV-light emission (${\sim}384\;nm$) due to effective surface passivation of the ZnO core, whereas the emission of green light (${\sim}550\;nm$) was almost negligible. They also showed slight photoluminescence (PL) red-shift, which is possibly due to further growth of the ZnO core and/or the extension of the electron wave function to the shell. The ZnO/ZnS core/shell nanocrystals demonstrate strong potential for use as low-cost UV-light emitting devices.