• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.367-370
• /
• 2007

Present study examines detonation wave propagation characteristics in annular channel. A normalized value of channel width to the annular radius was considered as a geometric parameter. A parametric study was carried out for a various regimes of detonation waves from weakly unstable to highly unstable detonation waves. Numerical approaches that used in the previous study of numerical requirements of the simulation of detonation wave propagations in 2D and 3D channel were used also for the present study with OpenMP parallization for multi-core SMP machines. The major effect of the curved geometry on the detonation wave propagation seems to be a flow compression effect, regardless of the detonation regimes. The flow compression behind the detonation wave by the curved geometry of the circular channel pushes the detonation wave front and results in the overdriven detonation waves with increased detonation speed beyond the Chapmann-Jouguet speed. This effect gets stronger as the normalized radius smaller, as expected. The effect seems to be negligible beyond the normalized radius of 10.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.177-185
• /
• 2006

Cavitation is the dominant noise source of the marine vehicle. Of the various types of cavitation , tip vortex cavitation is the first appearance type of marine propeller cavitation and it generates high frequency noise. In this study, tip vortex cavitation behavior and noise are numerically investigated. A numerical scheme using Eulerian flow field computation and Lagrangian particle trace approach is applied to simulate the tip vortex cavitation on the hydrofoil. Vortex flow field is simulated by combined Moore and Saffman's vortex core radius equation and Sculley vortex model. Tip vortex cavitation behavior is analyzed by coupled Rayleigh-Plesset equation and trajectory equation. The cavitation nuclei are distributed and released in the vortex flow result. Vortex cavitation trajectories and radius variations are computed according to nuclei initial size. Noise is analyzed using time dependent cavitation bubble position and radius data. This study may lay the foundation for future work on vortex cavitation study and it will provide a basis for proper underwater propeller noise control strategies.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.8-13
• /
• 2023

High bandwidth memory a core technology of the future memory semiconductor industry, is attracting attention. Temporary bonding and debonding process technology, which plays an important role in high bandwidth memory process technology, is also being studied. In this process, total thickness variation is a major factor determining wafer performance. In this study, the reliability of the equipment measuring total thickness variation is identified, and the servo motor settling, and wafer total thickness variation measurement accuracy are analyzed. As for the experimental variables, vacuum, acceleration time, and speed are changed to find the most efficient value by comparing the stabilization time. The smaller the vacuum and the larger the radius, the longer the settling time. If the radius is small, high-speed rotation performance is good, and if the radius is large, low-speed rotation performance is good. In the future, we plan to conduct an experiment to measure the entire of the wafer.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.435-438
• /
• 2008

To verify the load equations, the load-stroke curves of the load equation that were analytically derived for sandwich plates were compared with those of the simulations in the case of the total thickness of 3 mm, the thickness of the face sheets of 0.5 mm, a gap between attachment points of 1.5 mm, and a thickness of the core element of 0.8 mm. The results of the comparisons showed that the overall analytic loads enable the prediction of the numerical loads irrespective of the change of the clearance, the radius of the die, and the radius ratio.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.164-167
• /
• 2006

Micro lens especially for optical pick up(Blu-ray) lens module is one of the key products for IT technology. Specific attention has been given to manufacturing of large radius lens but little to small radius less than 2mm diameter with N.A>0.8. This paper deals with a high precision glass molding technology for mass production of Blu-ray pick up lens. Ultra precisely machined tungsten carbide core and glass molding equipments are utilized for forming process. Evaluation was performed in terms of profile accuracy, surface roughness and thickness of fabricated glass lens.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.22-27
• /
• 2009

Target design study to improve the quality of an accelerated proton beam from the interaction of a high-intensity short pulse laser with an overdense plasma slab has been accomplished by using a two-dimensional, fully electromagnetic and relativistic particle-in-cell (PIC) simulation. The target consists of a thin core part and a thick peripheral part of equivalent plasma densities, while the ratio of the radius of the core part to the laser spot size, and the position of the peripheral part relative to the fixed core part were varied. The positive effects of this core-peripheral target structure could be expected from the knowledge of the typical target normal sheath acceleration (TNSA) mechanism in a laser-plasma interaction, and were apparently evidenced from the comparison with the case of a conventional simple planar target and the case of the transversal size reduction of the simple planar target. Improvements of the beam qualities including the collimation, the forward directionality, and the beam divergence were verified by detailed analysis of relativistic momentum, angular directionality, and the spatial density map of the accelerated protons.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.907-915
• /
• 2024

Various core designs with multi-batch fuel management (FM) are proposed and optimized for an innovative small modular reactor (iSMR), focusing on enhancing the inherent safety and neutronic performance. To achieve soluble-boron-free (SBF) operation, cylindrical centrally-shielded burnable absorbers (CSBAs) are utilized, reducing the burnup reactivity swing in both two- and three-batch FMs. All 69 fuel assemblies (FAs) are loaded with 2-cylindrical CSBA. Furthermore, the neutron economy is improved by deploying a truly-optimized PWR (TOP) lattice with a smaller fuel radius, optimized for neutron moderation under the SBF condition. The fuel shuffling and CSBA loading patterns are proposed for both 2- and 3-batch FM with the aim to lower the core leakage and achieve favorable power profiles. Numerical results show that both FM configurations achieve a small reactivity swing of about 1000 pcm and the power distributions are within the design criteria. The average discharge burnup in the two-batch core is comparable to three-batch commercial PWR like APR-1400. The proposed checker-board CR pattern with extended fingers effectively assures cold shutdown in the two-batch FM scenario, while in the three-batch FM, three N-1 scenarios are failed. The whole evaluation process is conducted using Monte Carlo Serpent 2 code in conjunction with ENDF/B-VII.1 nuclear library.

• 마이크로전자및패키징학회지
• /
• 제28권1호
• /
• pp.55-60
• /
• 2021

유연한 특성을 유지하면서 높은 접착력을 가진 웨어러블 디스플레이를 제작하기 위하여 전해도금법을 이용한 접착법을 진행하였다. 또한 섬유에 접착된 LED의 사파이어 기판을 제거하기 위하여 LLO 전사법을 이용하였다. 그 후 전해도금을 이용한 접착법을 진행한 샘플의 SEM, EDS 데이터를 통하여 실제로 구리가 섬유직물의 격자사이를 관통하여 성장하며 광원과 섬유를 고정시켜주는 것을 확인하였다. 구리의 접착특성을 확인하기 위하여 Universal testing machine (UTM)을 이용하여 측정하였다. 도금 접착 후 laser lift-off (LLO) 전사공정을 완료한 샘플과 전사공정을 진행하지 않은 LED의 특성을 probe station을 이용하여 비교하였다. 공정 이후의 광원의 특성을 확인하기 위하여 인가 전류에 따른 electroluminescence (EL)을 측정하였다. 전류가 증가할수록 온도가 상승하여 Bandgap이 감소하기 때문에 spectrum이 천이하는 것을 확인하였다. 또한 radius 변화에 따른 샘플의 전기적 특성 변화를 probe station을 이용하여 확인하였다. Radius 변형에도 구리가 bending stress를 견딜 수 있는 기계적 강도를 가지고 있어 Vf 변화는 6% 이하로 측정되었다. 이러한 결과를 토대로 웨어러블 디스플레이 뿐만 아니라 유연성이 필요한 배터리, 촉매, 태양전지 등에 적용되어 웨어러블 디바이스의 발전에 기여할 수 있을 것으로 기대한다.

• 한국자기학회지
• /
• 제25권4호
• /
• pp.129-137
• /
• 2015

Cu(반경 $r_a$ = $95{\mu}m$)/$Ni_{80}Fe_{20}$(외경 $r_b$ = $120{\mu}m$)의 코어/쉘 복합 와이어를 전기도금방법으로 제작하였다. 제작 된 복합 와이어에 대해 원통 좌표계에서 임피던스 텐서의 두 대각 성분 $Z_{{\theta}{\theta}}$와 $Z_{zz}$를 10 kHz~10 MHz 범위의 주파수(f)와 0 Oe~200 Oe 범위의 외부 정지 자기장의 함수로 측정하였다. Maxwell 방정식으로부터 코어/쉘 복합 와이어의 두 대각 임피던스 $Z_{{\theta}{\theta}}$와 $Z_{zz}$를 각각 복소 투자율 텐서의 두 대각 성분 ${\mu}^*_{zz}$와 ${\mu}^*_{{\theta}{\theta}}$로 표현하는 식을 유도하였다. 유도된 식을 이용하여 측정된 $Z_{{\theta}{\theta}}$(f)와 $Z_{zz}$(f) 스펙트럼으로부터 ${\mu}^*_{zz}$(f)와 ${\mu}^*_{{\theta}{\theta}}$(f) 스펙트럼을 각각 뽑아낼 수 있었다. 뽑아낸 두 대각 투자율 스펙트럼을 자벽이동과 자화회전의 완화과정으로 해석하면 Cu/NiFe 코어/쉘 복합 와이어의 동적 자화과정을 규명하는 유용한 도구가 될 수 있다는 것을 제시하였다.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.29-35
• /
• 2012

척추관 협착증은 감압술과 융합술 그리고 인공추간판 치환술 등이 있으며, 2000년대 중반부터는 인공추간판 치환술이 널리 시술되고 있다. 인공추간판의 연구는 추간판의 자유도 및 추체의 굴곡-신전, 측굴전, 축회전에 대한 해석이 핵심기술이지만, 시술 후 수년이 경과하여 발생하는 피로파손이 새롭게 큰 문제점으로 대두되고 있다. 따라서 인공추간판 연구는 슬라이딩 코어의 피로특성 및 내구성 향상에 집중되어야 한다. 본 연구에서는 세계적으로 가장 많이 사용되는 인공추간판 제품(SB Charit$\acute{e}$ III)을 기초로 유한요소모델을 제작하고, 슬라이딩 코어의 곡률반경과 마찰계수의 변화가 von-Mises 응력과 접촉압력에 미치는 영향을 평가하였다. 이와 같은 결과를 바탕으로 새로운 인공추간판 모델들 (Model-I, -II, -III)을 제안하고 일정수명 후 발생할 수 있는 슬라이딩 코어의 피로파손 거동에 대해 SB Charit$\acute{e}$ III의 결과와 비교 평가하였다.