• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.38-45
• /
• 2006

The superconducting fault current limiters(SFCLs) provide the effect such as enhancement in power system reliability due to limiting the fault current within a few miliseconds. Among various SFCLs we have developed a flux-lock type SFCL and exploited a special design to effectively reduce the fault current according to properly adjustable magnetic field after the short-circuit test. This SFCL consists of two copper coils wound in parallel on the same iron core and a component using the YBCO thin film connected in series to the secondary copper coil. Meanwhile, operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. To analyze the operational characteristics, we compared closed-loop with open-loop iron core. When the applied voltage was 200[Vrms] in the additive polarity winding, the peak values of the line current the increased up to 30.71[A] in the closed-loop and 32.01[A] in the open-loop iron core, respectively. On the other hand, in the voltages generated at current limiting elements were 220.14[V] in the closed-loop and 142.73[V] in the opal-loop iron core during first-half cycle after fault instant under the same conditions. We confirmed that the open-loop iron core had lower power burden than in the closed-loop iron core. Consequently, we found that the structure of iron core enabled the flux-lock type SFCL at power system to have the flexibility.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.2
• /
• pp.1-18
• /
• 2019

The purposes of this study were to develop analysis criteria and analyze the two subject competencies of units dealing with the core concept 'Relation' of the middle school Technology-Home Economics textbook in accordance with the 2015 revised curriculum: 'practical-problem-solving-ability' and 'relationship ability'. The subject of analysis of the current study was the activity assignment of Chapter 1 related to the core concept 'Relation', from the twelve middle school 'Technology-Home Economics II' textbooks. The results of this study were as follows: First, some textbooks showed differences in highlighting or downplaying the components of certain subject competencies. The analysis results for 'practical-problem-solving-ability' in textbook A, E, and G were shown in the high frequency, while in textbook D in the lowest frequency. The analysis results for 'relationship ability' in textbook K and A were shown in the high frequency, while in textbook J in the lowest frequency. Second, Value Judgement was the most frequent component of 'practical-problem-solving-ability' followed by Logical Thinking, Practical Reasoning, and Decision-Making. Family Relation and Sense of Community was the component of 'relationship ability' most frequently dealt with followed by Communication, Conflict Management, and Respecting Others, however Environmental and Ecological Awareness was not shown at all. The two subject competencies were mostly reflected in the Technology-Home Economics textbooks from all the twelve publishers.

• Journal of KIISE:Software and Applications
• /
• v.32 no.7
• /
• pp.601-611
• /
• 2005

Due to not only proven stability and reliability but a significant investment and years of accumulated -experience and knowledge, legacy systems have supported the core business applications of a number of organizations over many years. While the emergence of Web-based e-business environments requires externalizing core business processes to the Web. This is a competitive advantage in the new economy. Consequently, organizations now need to mine the business value buried in the legacy systems for reuse in new e-business applications. In this paper we suggest a systematic approach to mining components that perform specific business services and that consist of the legacy system's assets to be leveraged on the modem platform. The proposed activities are divided into several tasks. First, use cases that realize the business processes are captured. Secondly, a design model is constructed for each identified use case in order to integrate the use cases with the similar functionalities. Thirdly, we identify component candidates from the design model and then adjust the component candidates by considering common elements among the candidate components. And also business components are divided into three more fine-grained components to deploy them onto J2EE/EJB environments. finally, we define the interfaces of components which provide functionalities of the components as operations.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.2 s.8
• /
• pp.65-74
• /
• 2002

The CBD(component based development) method has recently been on the rise as the main current among all fields of developing Information Systems. The developing system by building and integrating of components is encouraged in GIS sphere. Business domain which considerably identifies components occupies GIS shpere rather then any other sphere. Arithmetic function is quite needed in GIS sphere but non-arithmetic functions are also used in GIS sphere as well as in enterprise sphere. Component is characterized by ensuring the reuse of itself. The efficiency of reusing component is promoted as the component is functionally simple and is packed to a minimum. The GIS Component Extraction Method has already been presented in several studies but this study is about the GIS Component Extraction by the Affinity Analysis Method. CBD uses UML on a basis and the core of the UML is consisted of the use case and the class. The purpose of the Affinity Analysis is a study how relate between the use case and the class in a certain business domain and then the results identify the component. The Affinity Analysis is useful not only in GIS but also in every business domain and is considered to be popular as the procedure of this method is not complex at all.

• Journal of KIISE:Software and Applications
• /
• v.33 no.6
• /
• pp.550-563
• /
• 2006

Software product line engineering is a method that prepares for the future reuse and supports to seamless reuse in application development process. Commonality and variability play central roles in all product line development processes. Reusable assets will become core assets by explicitly representing C&V. Indeed, the variabilities that art identified at each phase of core assets development have different levels of abstraction. In the past, these variabilities have been handled in an implicit manner and without distinguishing the characteristics of each core assets. In addition, previous approaches have depended on the experience and intuition of a domain expert to recognize commonality and variability. In this paper, we suggest a 2-dimensional analyzing method that analyzes the variabilities of core assets in software product line. In horizontal analysis process, the variation types are analyzed in requirements, architecture, and component that are produced at each phase of development process. In vertical analysis process, variations are analyzed in different abstract levels, in which the region of commonality is identified and the variation points are refined. By this method, the traceability of variations between core assets will be possible and core assets can be reused seamlessly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1631-1635
• /
• 2007

Japanese Brown cattle, one of the four domestic beef breeds in Japan, are suffering from numerical reduction due to economic pressure from profitable breeds. In this study, all the reproductive cows in the Kouchi sub-breed of the Japanese Brown cattle that were alive in July 2005 were investigated by pedigree analysis to clarify genetic structure and composition of genetic variability. In addition, genetically important individuals for the maintenance of genetic variability of the sub-breed were also identified through the core set method. The number of cows analyzed was 1,349. Their pedigrees were traced back to ancestors born around 1940, and pedigree records of 13,157 animals were used for the analysis. Principal component analysis was performed on the relationship matrix of the cows, and their factor loadings were plotted on a three-dimensional diagram. According to their spatial positions in the diagram, all the cows were subdivided into five genetically distinctive subpopulations of 131 to 437 animals. Genetic diversity of the whole sub-breed, which is estimated to be 0.901, was decomposed into 0.856 and 0.045 of within-subpopulation and between-subpopulation components. Recalculation of genetic diversity after removal of one or several subpopulations from the five subpopulations suggested that three of them were genetically important for the maintenance of genetic variability of the sub-breed. Applying the core set method to all the cows, maximum attainable genetic diversity was estimated to be 0.949, and optimal genetic contributions assigned to each cow supported the previous results indicating relative importance of the three subpopulations as useful genetic materials.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.42-48
• /
• 2015

To improve the core technology of the micro gas turbine, the performance test facility was developed. This paper is focusing on the explanation of the characteristics of micro gas turbine and its assist devices. Major part of micro gas turbine were radial type of compressor, annular type of combustor, radial type of turbine, thrust foil bearing, radial foil bearing and generator. The assist devices were consist of exhaust duct, inverter, data acquisition system, load bank and test cell. Before building up the test facility, the component test was previously conducted to confirm the component performance. After the test facility was prepared, the motoring test was conducted to investigate the rotor dynamic characteristics of the micro gas turbine. Also, the part load performance test was performed. With a developed micro gas turbine test facility, the improved core technology about the micro gas turbine can be suggested to the related industries.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.66.1-66.1
• /
• 2016

We present our observational results of BL Lacertae(2200+420) obtained at 22, 43, 86, and 129 GHz simultaneously during 27 months(2013.Jan ~ 2015.Mar) which includes their two gamma-ray outbursts(2013.Oct & 2015.Mar) to study a connection between the gamma-ray outbursts and the radio activity. We mainly use a Korean VLBI monitoring program, IMOGABA(Interferometric Monitoring Of Gamma-ray Bright AGNs) which is a monthly monitoring program with the KVN(Korean VLBI Network). Overall, our KVN image shows two components in the map, a stationary core at the center and one moving jet component to the south, but almost core only at 86, 129 GHz. The location of the moving jet component in the maps depend on the frequencies that 22, 43, 86, and 129 GHz. We have checked light curves, spectral index, kinematics, and radio structure to find differences before and after the gamma-ray outbursts, but there was no significant correlation. We also have derived a decay time scale of ~9 months for the major radio outburst by applying an exponential decay fitting.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1651-1664
• /
• 2023

It is very difficult to capture the multi-dimensional phenomena such as asymmetric flow and temperature distributions with the one-dimensional (1D) model, obviously, due to its inherent limitation. In order to overcome such a limitation of the 1D representation, many state-of-the-art system codes have equipped a three-dimensional (3D) component for multi-dimensional analysis capability. In this study, a standard multi-dimensional analysis model of APR1400 (Advanced Power Reactor 1400) has been developed using TRACE (TRAC/RELAP Advanced Computational Engine). The entire reactor pressure vessel (RPV) of APR1400 has been modeled using a single 3D component. The fuels in the reactor core have been described with detailed and coarse representations, respectively, to figure out the impact of the fuel description. Using both 3D RPV models, a comparative analysis has been performed postulating a double-ended guillotine break at a cold leg. Based on the results of comparative analysis, it is revealed that both models show no significant difference in general plant behavior and the model with coarse fuel model could be used for faster transient analysis without reactor kinetics coupling. The analysis indicates that the asymmetric temperature and flow distributions are captured during the transient, and such nonuniform distributions contribute to asymmetric quenching behaviors during blowdown and reflood phases. Such asymmetries are directly connected to the figure of merits in the LBLOCA analysis. Therefore, it is recommended to employ a multi-dimensional RPV model with a detailed fuel description for a realistic safety analysis with the consideration of the spatial configuration of the reactor core.

• Journal of KIISE:Software and Applications
• /
• v.33 no.12
• /
• pp.1008-1021
• /
• 2006

Product line engineering(PLE) is one of the recent and effective reuse approaches that enables developing a number of applications by instantiating a core asset. Elements of a core asset are product line architecture(PLA), component, and decision model. Among these elements, PLA is the key element since it defines the overall structure of the core asset. Although numerous PLE methodologies have been introduced, it is still unclear what should be the elements of a PLA and how to systematically instantiate it for specific applications. Formal specifications can play a key role in defining detailed and precise instantiation process. In this paper, we first present a meta model of PLA and show how to specify PLA in a formal language, Object-Z. Then, we propose instantiation rules using formal specification and those rules precisely define constraints for instantiating PLA. By applying the proposed formal specification, we believe PLA instantiation can be carried out precisely and correctly, yielding high quality software development.