• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.139-143
• /
• 2001

Work-related injurieshave become the issue in the twentieth century. Musculoskeletal disorders are the most common work-related injuriesand the most frequent from of work-related i11-health (more than 50％ of total work-related injuries (BLS 1990)). The workers at copy shops have complained of pain in their back, legs, and shoulders. Most of them work for more than 8 hours a day. They have claimed that their pains were associated with repetitive and continuous work over a long term. The purpose of this research is to suggest an ergonomically comfortable redesign of the copy machine. This study was performed by conducting a survey of copy shop workers who have complained of job-related physical pain, and analyzing their working postures. The copy machine was ergonomically modified to reduce the workers' pain. The VIS10N 3000 software was used to analyze the posture. The analysis showed significant difference in the ranges of back and neck motion (p<0.05).

• Journal of environmental and Sanitary engineering
• /
• v.21 no.1 s.59
• /
• pp.58-65
• /
• 2006

This study is measured in at ozone concentrated places in school and outside of school where places that use copy machine and the others do not use one. Library copy room, Search room, Y-Copy, J-copy, R-shop are the places using copy machines and Search room, K-apt, J-billiard hall are the opposite. The measurement was held three times a day-the morning, the afternoon and the evening-once for each at indoor and outdoor. 8 places were lower than domestic ozone concentration standard(0.06ppm). The indoor ozone concentration average was the highest in Search room of school and was the lowest in Library restroom. The outdoor ozone concentration average was the highest in J-billiard hall.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.592-596
• /
• 2001

A TACUB jig was applied to separate waste plastics [polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET)] used in copy machine. The effect of water pulsation including amplitude and frequency on the separation performance was investigated for the feeds containing two or three plastics. Good results are obtained under suitable conditions. Grades of 99.8% PS,99.3% ABS, and 98.6% PET are recovered as the products in the upper, middle and bottom layers respectively. Based on these results, a processing plant fer recycling of plastics from scrapped copy machines is now under construction.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.75-79
• /
• 2001

This paper presents a novel version of an active voltage clamped ZVS-PWM high frequency inverter using IGBTs for electromagnetic induction eddy current-based rolling drum heating in new generation copy and printing machines in consumer business use. The operating principle of this inverter circuit and unique features are described herein. Its constant frequency duty cycle (asymmetrical PWM) controlled voltage source quasi-resonant soft switching high frequency inverter employing IGBTs is proposed, which is capable of achieving stable and efficient zero voltage soft switching commutation over a widely specified power regulation range from full power to low power. The operating performances in a steady state of this inverter is discussed and evaluated on basis of simulation and experimental results as an induction heated roller in new generation copy machine.

• Clean Technology
• /
• v.17 no.2
• /
• pp.117-123
• /
• 2011

In this study, evaluation tests for cleaning performance of various cleaning agents and selection of optimal ultrasonic cleaning parameters were executed to develop an efficient cleaning process in remanufacturing of laser copy machine. Cleaning performance tests were executed with 8 cleaning agents (A~H) to remove the contaminants of oil-ink, toner particles, and shoe polish. Physical properties and foamability tests were also applied. For 3 types of contaminants, cleaning agent G showed superior cleaning performance compared to agent A which has being used at a remanufacturing of laser copy machine in Korea. With cleaning agents selected in pre-tests, ultrasonic cleaning tests were executed to remove real contaminants on the parts of used digital laser copy machine parts. Cleaning agent G at 28 kHz ultrasonic frequency showed faster cleaning performance compared to agent A and other frequencies. The productivity and economic efficiency in remanufacturing of laser copy machine are expected to increase by adapting agent G and 28 kHz frequency at ultrasonic cleaning process.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.1-7
• /
• 2012

In this paper, we design and implement the simulator for WAN storage replication model performance evaluation in cloud computing environment. Each cloud of simulator is composed of virtual machine emulator and storage emulator. The virtual machine emulator is composed of read/write ratio module, the read/write sequence combination module, and the read/write request module. The storage emulator is composed of storage management module, data transfer module, read/write operations module, and overhead processing module. Using the simulator, we evaluate performance of migration scheme, pre-copy and the post-copy, considering about read/write ratio, network delay, and network bandwidth. Through simulation, we have confirmed that the average migration time of pre-copy was decreased proportional to the read operation. However, average migration time of post-copy was on the increase. Also, the average migration time of post-copy was increased proportional to the network delay. However, average migration time of pre-copy was shown uniformly. Therefore, we show that pre-copy model more effective to reduce the average migration time than the post-copy model. The average migration time of pre-copy and post-copy were not affected by the change of network bandwidth. Therefore, these results show that selects the storage replication model to be, the network bandwidth know not being the important element.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.899-912
• /
• 2000

PVM provides users with a single image of high performance parallel computing machine by collecting machines distributed over a network. Low communication overhead is essential to effectively run applications on PVM based platforms. In the original PVM, three times of memory copies are required for a PVM task to send a message to a remote task, which results in performance degradation. We propose a zero-copy model using global shared memory that can be accessed by PVM tasks, PVM daemon, and network interface card(NIC). In the scheme, a task packs data into global shared memory, and notify daemon that the data is ready to be sent, then daemon routes the data to a remote task to which it is sent with no virtual data copy overhead. Experimental result reveals that the message round trip time between two machines is reduced significantly in the proposed zero-copy scheme.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.198-200
• /
• 2005

Recently, intellectual property problem caused by illegal copy or circulation of digital contents with computer and advance of network. it will lose producer's desire and cause economic losses. so we need to demand ownership protection technology for prevent illegal copy without an owner consent and protect ownership with effect. in this paper, we change digital image at frequency domain and choose a factor choosing frequency area with human perceptibility. we inserted repetitive and adaptive watermark on the whole image by Labview Machine Vision. watermark inserted into the high frequency concentrated textual area with Wavelet Transform and then reduced damage of image by human visual feature after inserted watermark

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.309-317
• /
• 2022

In this paper, we propose a machine learning-based copy-move forgery detection network with dual branches. Because the rotation or scaling operation is frequently involved in copy-move forger, the conventional convolutional neural network is not effectively applied in detecting copy-move tampering. Therefore, we divide the input into rotation-invariant and scaling-invariant features based on the wavelet coefficients. Each of the features is input to different branches having the same structure, and is fused in the combination module. Each branch comprises feature extraction, correlation, and mask decoder modules. In the proposed network, VGG16 is used for the feature extraction module. To check similarity of features generated by the feature extraction module, the conventional correlation module used. Finally, the mask decoder model is applied to develop a pixel-level localization map. We perform experiments on test dataset and compare the proposed method with state-of-the-art tampering localization methods. The results demonstrate that the proposed scheme outperforms the existing approaches.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.15-16
• /
• 2011

본 논문에서는 클라우드 컴퓨팅 환경에서 저장공간 이주(storage migration)시에 저장공간의 읽기/쓰기 비율을 고려한 저장공간 복제 모델 선정을 위한 실험 환경을 설계한다. 기존의 저장공간 이주 모델은 가상머신과 저장공간중에 저장공간이 먼저 이주하는 선복제(pre-copy)와 나중에 이주하는 후복제(post-copy)가 있다. 이러한 복제 기법은 VM과 저장공간 이주의 필요성과 그 방법만을 제안하였으며, 성능 향상을 위한 이주 기법 선정 방법은 제시하지 못하였다. 따라서 본 논문에서는 클라우드 컴퓨팅 환경에서 다양한 스토리지의 읽기/쓰기 비율에 따른 이주 모델 선정 기법을 실험할 수 있는 시뮬레이터 설계 방법을 제시한다.