• Journal of the Korean Chemical Society
• /
• v.64 no.2
• /
• pp.61-66
• /
• 2020

In this study, we investigate the structural and electronic properties of copper oxide clusters, Cu_nO_n (n = 9 - 15). To find the lowest energy structures of copper oxide clusters, we use ReaxFF and density functional theory calculations. We calculate many initial copper oxide clusters using ReaxFF quickly. Then we calculate the lowest energy structures of copper oxide clusters using B3LYP/LANL2DZ model chemistry. We examine the atomization energies per atom, average bond angles, Bader charges, ionization potentials, and electronic affinities of copper oxide clusters. In addition, the second difference in energies is investigated for relative energies of copper oxide clusters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.70-74
• /
• 2012

Copper die casting motor (CDM) has a better design flexibility than aluminium die casting motor (ADM) because of the higher conductivity of copper. However, CDM has an economic and manufacturing weak point due to high copper price and high melting temperature compared to ADM. This paper describes a comparison of the design parameters, specifications, performances and material cost between CDM and ADM of 5.5kW_6P.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.151-157
• /
• 2002

The removing copper from CCA, CCFZ treated wood were tested with Tyromyces palustris. The shacking culture, solid culture, and stationary culture methods were tested to removal of copper in CCA, CCFZ treated wood. The steam pressure method and oxalic acid method were tested as pretreatment. To investigate of copper removal mechanism, the oxalic acid that produced by T. palustris and combination with copper was examined on stationary culture that contained CCA and CCFZ treated wood chips. Oxalic acid increased copper removing rate of T. palustris as pretreatment. Stationary culture had most removal effectiveness among the culturing methods. The removal rate of copper on bioreactor was 61% on 7 days. Copper-oxalate was detected on liquid culture, which show the oxalate from liquid of culture combined with copper from treated wood. It would be related to the removal of copper from treated wood by T. palustris.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.147-150
• /
• 2014

Copper ink has been prepared by mixing copper(II) formate and 2-ethyl-1-hexylammonium bicarbonate (EHABC) to overcome some weak points such as aggregation and degradation of copper nano-type ink. Ink was coated on glass substrate and calcined at $110^{\circ}C$ to $150^{\circ}C$ to generate electrically conductive copper film under two different atmospheres such as nitrogen gas and gaseous mixture of formic acid and methanol. The lowest resistivity of $1.88{\mu}{\Omega}{\cdot}cm$ of copper film was obtained at $150^{\circ}C$ in gaseous formic acid condition. The long-term resistivity shows to increase from $1.88{\mu}{\Omega}{\cdot}cm$ to $2.61{\mu}{\Omega}{\cdot}cm$ after one month.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.247-260
• /
• 2010

The developement of a HLW disposal canister is under way in KAERI using Cold Spray Coating technique. To estimate corrosion behavior of a cold sprayed copper, a creivice corrosion test was conducted at Southwest Research Institute(SWRI) in the United State. For the measurement of repassivation potential needed for crevice corrosion, three methods such as (1) ASTM G61-86 : Cyclic Potentiodynamic Polarization Measurements, (2) Potentiodynamic Polarization plus intermediate Potentiostatic Hold method, and (3) ASTM G192-08 (THE method) : Potentiodynamic- Galvanostatic-Potentiostatic Method, were introduced in this report. In the crevice corrosion test, the occurrence of corrosion at crevice area was optically determined and the repassivation potentials were checked for three kind of copper specimens in a simulated KURT underground water, using a crevice former dictated in ASTM G61-86. The applied electrochemical test techniques were cyclic polarization, potentiostatic polarization, and electrochemical impedance spectroscopy. As a result of crevice corrosion tests, every copper specimens including cold sprayed one did not show any corrosion figure on crevice areas. And the open-cell voltage, at which corrosion reaction initiates, was influenced by the purity of copper, but not their manufacturing method in this experiment. Therefore, it was convinced that there is no crevice corrosion for the cold sprayed copper in KURT underground environment.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.2
• /
• pp.79-82
• /
• 2019

⁶¹Cu is a promising PET radiometal having favorable nuclear decay characteristics with appropriate half-life of 3.3 h. Owing its promising capabilities in radiopharmaceutical chemistry and its chemical similarities with its isotopes ⁶⁴Cu and ⁶⁷Cu, in this work we have tried to optimize the production and separation conditions of ⁶¹Cu. ⁶¹Cu was produced via (p, x) reaction with natural nickel which was electroplated on the high purity silver coated copper backing target holder. The optimization of target electrodeposition, beam energy and current modulation, target dissolution and separation were optimized in this study. Preliminary studies show that ⁶¹Cu was successfully produced and separated which can be further extended for the production of ⁶⁴Cu and ⁶⁷Cu.

• The Korean Journal of Pesticide Science
• /
• v.7 no.2
• /
• pp.149-154
• /
• 2003

Potato blackleg disease caused by Erwinia carotovora subsp. atroseptica has been a serious problem in Korea. It was previously reported that four mixtures [streptomycin (9.3 ppm) + copper oxide (171.6 ppm)/copper hydroxide (146.3 ppm), streptomycin sulfate (7.0 ppm)+copper oxide (171.6ppm)/copper hydroxide (146.3 ppm)] were effective for the control of E. carotovora subsp. atroseptica. in in vitro test. Using those four mixtures and two antibiotics [streptomycin (81.4 ppm) and streptomycin sulfate (61.3 ppm)], the effectiveness of control for E. carotovora subsp. atroseptica. was conducted in the field. Two antibiotics showed over 60% of control efficacy under different soil conditions, while mixtures of two antibiotics with copper compounds did not show any control effects on the infected seed potato. Two mixtures [streptomycin (27.9 ppm)+copper hydroxide (438.9 ppm), streptomycin sulfate (21.0 ppm) + copper oxide (514.8 ppm)] were effective in the control of potato blackleg disease on the infected potato plants under different climate conditions.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.4
• /
• pp.220-227
• /
• 2001

The static creep behaviors of dispersion strengthened copper GlidCop were investigated over the temperature range of $650{\sim}690^{\circ}C$ (0.7Tm) and the stress range of 40~55 MPa (4.077~5.61 $kg/mm^2$). The stress exponents for the static creep deformation of this alloy was 8.42, 9.01, 9.25, 9.66 at the temperature of 690, 677, 663, and $650^{\circ}C$, respectively. The stress exponent, (n) increased with decreasing the temperature and became dose to 10. The apparent activation energy for the static creep deformation, (Q) was 374.79, 368.06, 361.83, and 357.61 kg/mole for the stress of 40, 45, 50, and 55 MPa, respectively. The activation energy (Q) decreased with increasing the stress and was higher than that of self diffusion of Cu in the dispersion strengthened copper. In results, it can be concluded that the static creep deformation for dispersion strengthened copper was controlled by the dislocation climb over the ranges of the experimental conditions. Larson-Miller parameter (P) for the crept specimens for dispersion strengthened copper under the static creep conditions was obtained as P=(T+460)(logtr+23). The failure plane observed for SEM slightly showed up transgranular at that experimental range, however, universally it was dominated by characteristic of the intergranular fracture.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.61-64
• /
• 2015

In solar industry, numerous researchers reported about cold spray method among various electrode formation technic, but there are no known a bonding mechanism of metal powder. In this study, a cross-section of copper electrode formed by cold spray method was observed and heterogeneous phase between silicon substrate and copper electrode was analyzed using morphology observation technic. SEM and TEM analysis were performed to analyze a crystallinity and distribution shape of heterogeneous copper phase. Molecular dynamics simulation was performed to calculate glass transition temperature of copper metal. In the result, amorphous copper phase was observed near interface between silicon substrate and metal electrode. The results of the molecular dynamics simulation show that an amorphous copper phase could be formed at a temperature below the melting point of copper because cold spraying resulted in a lower glass transition temperature.

• Research in Plant Disease
• /
• v.14 no.2
• /
• pp.102-106
• /
• 2008

The single application of Bacillus subtilis QST713(BS QST713) mixed application with fungicides and alternate application were treated to examine the control of alternaria leaf blight of Panax ginseng. Control value of alternaria leaf blight by single application of BS QST713 at 10 days interval was 83.3%, and those of single application at 10 days interval was $80.4{\sim}83.7%$ by azoxystrobin, chlorothalonil copper sulfate basic, copper sulfate basic, kresoxim-methyl, difenoconazole, mancozeb. When mixture of BS QST713 and fungicides were applied at 14 days interval, the control value of alternaria leaf blight were 83.6% by BS QST713 and mancozeb, and 82.6% by BS QST713 and azoxystrobin. However, mixture of BS QST713 with difenoconazole, kresoxim-methyl, copper sulfate basic and chlorothalonil copper sulfate basic exhibited the disease control values from 61.1% to 76.4%, which showed slightly lower control efficacy. In Daejeon, the alternate application of BS QST713 followed by copper sulfate basic with 14 days interval was 85.9% in control value, which showed the best control efficacy. The alternate application with other tested fungicides slightly decreased to $55.5{\sim}78.2%$ in control value. However, the alternate application of BS QST713 followed by fungicides showed very high control efficacy, which were approximately 90% in Muju, Jeonbuk Province. Consequently, the single, mixed or alternate application of BS QST713 and fungicides could be recommended as a control method to reduce the amount of fungicides.