• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.103-112
• /
• 2015

In India, recycling of treated effluent plays a major role in the industry. Particularly in copper industry, recycling techniques for treated effluents adopt conventional technologies which are not energy efficient and recovery of high quality process water, free flowing salts and sludge's is very low. This paper presents an overview of enhanced modern technology for treated effluents in copper industry making it more efficient with high recovery of high quality process water and free flowing salts. Life cycle cost (LCC) would be 15-20% lower than the conventional technologies. The conventional technology can be replaced with this proposed technique in the existing and upcoming copper industries.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.84-87
• /
• 2014

Separation/recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this study, preliminary investigation on separation of tin (Sn) from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow the concentration/separation of tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (meta stannic acid)occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its crystal structure, surface morphology and chemical composition were investigated.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 1부
• /
• pp.357-360
• /
• 2011

A new copper adenine MOF (Bio-MOF) was synthesized by hydrothermal procedure and explored for its low temperature $CO_2$ adsorption. In this adenine a DNA nucleotide was used as a ligand for Cu in DMF solution at $130^{\circ}C$. The synthesized Bio MOF was characterized by XRD, SEM, EDS, TG and BE Tresults. The material possesses high surface area (716.08 $m^2g^{-1}$) with mono dispersed particles of about 2.126 nm. The maximum $CO_2$ adsorption capacity is 5wt% at $50^{\circ}C$, which is regenerable at $100^{\circ}C$ which is very low when compared to other metal organic frame work studied. This study proves that the synthesized material is also be a choice materials for low temperature $CO_2$adsorption.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.771-775
• /
• 2015

In this paper, we designed and fabricated low cost imprinting process for micro patterning on FCCL (flexible copper clad laminate). Compared to conventional imprinting process, developed fabrication method processing imprint and UV photolithography step simultaneously and it does not require resin etch process and it can also reduce the fabrication cost and processing time. Based on proposed method, patterns with $10{\mu}m$ linewidth are fabricated on $180mm{\times}180mm$ FCCL. Compared to conventional methods using LDI (laser direct imaging) equipment that showed minimum line with $10{\sim}20{\mu}m$, proposed method shows comparable pattern resolution with very competitive price and shorter processing time. In terms of mass production, it can be applied to fabrication of large-area low cost applications including FPCB.

• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.555-558
• /
• 2010

This study examined the effect of current density on the surface morphology and physical properties of copper plated on a polyimide (PI) film. The morphology, crystal structure, and electric characteristics of the electrodeposited copper foil were examined by scanning electron microscopy, X-ray diffraction, and a four-point probe, respectively. The surface roughness, crystal growth orientation and resistivity was controlled using current density. Large particles were observed on the surface of the copper layer electroplated onto a current density of 25 mA/$cm^2$. However, a uniform surface and lower resistivity were obtained with a current density of 10 mA/$cm^2$. One of the important properties of FCCL is the flexibility of the copper foil. High flexibility of FCCL was obtained at a low current density rather than a high current density. Moreover, a reasonable current density is 20 mA/$cm^2$ considering the productivity and mechanical properties of copper foil.

• 공업화학
• /
• 제23권6호
• /
• pp.554-560
• /
• 2012

전자 통신 산업이 발달하면서 도전성 재료의 사용이 증가하게 되었다. 그에 따라 주로 사용되어오던 귀금속들을 대신할 저렴한 재료들이 필요하게 되었다. 그 중 구리는 귀금속에 비해 값이 저렴하고, 유사한 열 전기적 특성을 가졌지만 대기 중에서 쉽게 산화가 되는 문제점이 있다. 산화를 방지하기 위해서는 제조공정이 복잡해져 사용에 제한이 되어왔다. 구리의 산화 방지를 위한 방법 중 하나로 산화에 강한 금속을 Core-Shell 구조로 도금시켜 고유의 특성을 유지하며 산화를 방지하는 방법이 있다. 본 연구에서는 무전해 도금법으로 구리분말에 주석(Sn) 도금을 했고, 도금에 영향을 주는 인자들에 대해서 연구했다. XRD, FE-SEM, FIB, 4-Point Probe 등의 분석결과 구리 표면에 치밀한 주석피막이 도금되었고, 대기 중에서 산화가 되지 않았다. 분석결과를 바탕으로 최적의 도금 조건을 도출했고, 추가적으로, 도전성 필러 응용 가능성에 대한 실험을 했다. 합성된 분말을 pellet 형태로 압분 성형한 후 저온 열처리 전과 후의 변화를 분석했다. 그 결과 저온 치밀화를 통해 용융된 주석이 구리 입자들을 상호연결 시켰고, 전기 전도가 향상되었다.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1160-1169
• /
• 1999

본 연구에서 FPC에 사용되는 동박과 접착제의 이종 재료간에 계면접착력을 향상시키기 위해 silane primer를 도입하였다. 또한 동박표면 및 에폭시 접착제를 개질하여 개질조건이 접착강도에 미치는 영향도 조사하였다. 본 실험은 접착제층과의 상용성을 고려하여 silane primer로 triethoxyvinylsilane을 용액 및 무유화제 유화중합한 고분자형태와 3-aminopropyl-triethoxysilane (3-APTES), 3-glycidoxypropylmethoxysilane (3-GPTMS)을 사용하여 접착제층과의 접착력 증진을 도모하였다. 동박표면은 1,1,1-trichloroethane을 사용하여 개질 시간에 따른 동박 표면의 지형변화와 그에 따른 접착강도를 조사하였다. 결과에 따르면 silane을 사용한 경우 동박-접착제간의 접착력이 약2 ~ 5배 정도 증진되었고, 동박표면의 개질시간은 약 10분 정도가 최적의 접착조건임을 알 수 있었다. 또한 저분자량 실란의 농도에 따른 접착력은 3-APTES는 약 0.5 vol.%에서 최고 접착력을 보였고, 3-GPTMS의 경우 약 0.2 vol.%에서 최고의 접착력을 보였다.

• 자원리싸이클링
• /
• 제25권6호
• /
• pp.98-104
• /
• 2016

본 연구의 목적은 호주산 저품위 동광을 부유선별하여 정광으로 회수하고자 할 때, 최적의 부유선별 조건을 얻고자 하는데 있다. 본 연구에서는 저품위 동광의 파분쇄 및 분급에 의해 선별에 적절한 입자크기의 시료를 얻은 다음, 이를 대상으로 부유선별 시 포수제, 활성제, 억제제의 첨가량 및 광액의 pH 변화가 부선효율에 미치는 영향을 조사함으로써 품위가 향상된 정광을 얻고자 하였다. 본 연구실험결과 얻은 최적의 부유선별 조건은 광액산도 pH9.0, 활성제 500 g/t $CuSO_4{\cdot}5H_2O$, 포수제 500 g/t K.E.X, 억제제 1500 g/t $Na_2SO_3$, 광액농도는 25 wt.% 이었다. 최적조건하에서 얻은 정광중의 동 품위 및 회수율은 각각 4 wt.%와 65 wt.% 정도이었고 대부분 철 성분을 함유한 광물 이었다.

• Journal of Nutrition and Health
• /
• 제5권2호
• /
• pp.91-103
• /
• 1972

Zinc is one of the essential trace elements in the living organism for growth and health. The first identified metalloenzyme, carbonic anhydrase, is a zinc compound and several others have been described since. Among zinc deficiency syndromes in animals porcine parakeratosis has been successfully treated with zinc supplements, and in man a syndrome of anemia, hypogonadism, hepatosplenomegaly, and dwarfism, prevalent in parts of Iran and Egypt, has been ascribed to lack of zinc in the diet. Dietary zinc excess in the rat is manifested by a hypochromic, microcytic anemia, poor growth, reduction in liver catalase and cytochrome oxidase. The present study is an attempt to delineate the changes of tissue contents of trace elements, especially of iron, copper and zinc in liver and kidneys of the rats. Weanling albino rats, weighing 60 to 80gm. were used in this experiments. The rats were housed in cages with aluminum floors and received feed and distilled water ad libitum. Animals were divided into three groups, control, low zinc diet and high zinc diet groups. The high zinc diet group was subdivided into 0.5% Zn and 0.7%Zn groups. The supplementary copper or iron was added to the high dietary zinc groups. The animals were sacrificed and the tissues were washed several times with deionized water. The wet digested samples were analyzed by Hitachi Model 207 atomic absorption spectro-photometer for the determination of iron, copper and zinc in the liver and kidney. Hemoglobin level in the blood was measured by cyanmethemoglobin method. The results of this study are as follows: 1) All rats fed high zinc diets and low zinc diets gained less weight than control. Weight gain was not improved by the supplementary copper or iron and both. 2) Hemoglobin concentration was decreased significantly in the rats fed high zinc diets and less in the low zinc diet. Supplementary copper and iron to the higher zinc diet appeared to give some improvement of anemia. 3) The iron contents of the liver and kidneys were significantly decreased in the high zinc groups and the reduction was more significantly in the rats receiving higher zinc diet (0.7%). The supplementary copper caused a further depression of liver iron. On the other hand, the iron, added to the high zinc diet lessoned the severity of the decrease in liver iron and caused kidney iron to be maintained almost at the level found in the rats fed by zinc and supplementary copper diet. 4) High zinc diets did not change copper content of the liver and kidney. Supplementary copper elevated the concentration in the liver and kidney and added iron had no effect on the accumulation of copper in the liver and kidneys. 5) The high zinc diets caused marked increases of zinc content in the liver and kidney. Supplementary iron to the high zinc diet caused increases of zinc contents of liver and kidneys.