• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.47-50
• /
• 2007

Since world coordinate system is entirely used because of the revision of land surveying law, it is needed that transformation of coordinates of geo-spatial information established by korea coordinate system to be performed. It is required, however, to have a plan for transformation of world coordinate system because the coordinate system is not unified due to the geo-spatial information system using dualistic control data of both old and new data of korea coordinate system. For this purpose, in this study, I have calculated coordinate transformation coefficient per control data of korea coordinate system and proposed a plan of transforming a dualistic coordinate system which is based on control data of korea coordinate system effectively into world coordinate system through verification of accuracy of transformation per control data.

• 항공우주기술
• /
• 제10권1호
• /
• pp.116-121
• /
• 2011

나로우주센터 추적레이더가 획득한 실시간 위치 정보는 발사통제시스템에서 위치, 속도, 비행궤도 표시, 예상궤도 진입여부 및 안전을 위한 비행종료시점 판단 등의 중요한 데이터로 사용된다. 추적레이더에서 발사통제시스템으로 전송하는 표적의 위치 정보는 추적레이더 중심의 좌표값 데이터이며, 발사통제시스템에서 추적레이더로 전송하는 Slaving 데이터는 발사대 중심의 좌표값 데이터이다. 이렇듯 추적레이더와 발사통제시스템 간의 송수신 데이터는 각 시스템에 맞게 적절하게 좌표 변환이 수행되어야 한다. 본 연구에서는 나로우주센터 추적레이더 간의 상호 데이터 송수신 및 발사통제시스템과의 데이터 통신에 사용되는 각각의 좌표계 및 좌표계 간의 좌표 변환에 대해 기술하였다.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.643-650
• /
• 2006

This paper is concerned with the vibration analysis of a simply-supported rectangular plate with a circular cutout. Even though there have been many methods developed for the free vibration of the rectangular plate with a rectangular cutout, very few research has been carried out for the rectangular plate with a circular cutout. In this paper, a new methodology called independent coordinate coupling method, which was developed to save the computational effort for the free vibration analysis of rectangular plate with a rectangular cutout, is applied to the case of circular cutout. The independent coordinate coupling method employs the global coordinate system for the plate and the local coordinate system for the cutout. In the case of the rectangular plate with a circular cutout, the global coordinate system is the Cartesian coordinate system and the local coordinate system is the polar coordinate system. By imposing the compatibility condition, the relationship between the global coordinates and the local coordinates is derived. This equation is then used for the calculation of the mass and stiffness matrices resulting in eigenvalue problem. The numerical results show the efficacy of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.224-229
• /
• 2012

In this paper, we propose a correction method for astronomical telescope using recursive least square method. There are two ways to move a telescope : equatorial operation and altazimuth operation. We must align polar axis of a equatorial telescope with the north celestial pole and adjust the horizontal axis of a altazimuth telescope exactly to match the celestial coordinate system with the telescope coordinate system. This process needs time and expertise. We can skip existing process and correct a tracking error easily by deriving the relationship of the celestial coordinate system and the telescope coordinate system using the proposed correction method. We obtain the coordinate of a celestial body in the celestial coordinate system and the telescope coordinate system and derive a transformation matrix through the obtained coordinate. We use recursive least square method to estimate the unknown parameters of a transformation matrix. Finally, we implement a telescope control system using a microprocessor and verify the performance of the correction method. Through an experiment, we show the validity of the proposed correction method.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.122-130
• /
• 2013

Rail geometries such as cant, grade and curvature can be easily represented by means of a track coordinate system. In this analysis, in order to derive a dynamic and constraint equation of a wheelset, the track coordinate system is used as an intermediate stage. Dynamic and constraint equations of railway vehicle bodies except the wheelset are written in the Cartesian coordinate system as a conventional method. Therefore, whole dynamic equations of a railway vehicle are derived by combining wheelset dynamic equations and dynamic equations of railway vehicle bodies. Constraint equations and constraint Jacobians are newly derived for the track coordinate system. A process for numerical analysis is suggested for the derived dynamic and constraint equations of a railway vehicle. The proposed dynamic analysis of a railway vehicle is validated by comparison against results obtained from VI-RAIL analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1177-1182
• /
• 2006

This paper is concerned with the vibration analysis of a simply-supported rectangular plate with a circular cutout. Even though there have be en many methods developed for the free vibration of the rectangular plate with a rectangular cutout., very few research has been carried out for the rectangular plate with a circular cutout. In this paper, a new methodology called independent coordinate coupling method, which was developed to save the computational effort for the free vibration analysis of rectangular plate with a rectangular cutout, is applied to the case of circular cutout. The independent coordinate coupling method employs the global coordinate system for the plate and the local coordinate system for the cutout. In the case of the rectangular plate with a circular cutout, the global coordinate system is the Cartesian co ordinate system and the local coordinate system is the polar coordinate system. By imposing the compatibility condition, the relationship between the global coordinates and the local coordinates is derived. This equation is then used for the calculation of the mass and stiffness matrices resulting in eigenvalue problem. The numerical results show the efficacy of the proposed method.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.44-52
• /
• 2004

This paper proposed a error compensation methodology for three-DOF translational parallel manipulator. The proposed method uses CMM (coordinate measuring machine) as metrology equipment to measure the position of end-effector. To identify the transform relationships between the coordinate system of the parallel manipulator and the CMM coordinate system, a new coordinate referencing (or coordinate system identification) technique is presented. By using this technique, accurate coordinate transformation relationships are efficiently established. According to these coordinate transformation relationships, an equation to calculate the compensating error components at any arbitrary position of the end-effector is derived. In this paper, Monte Carlo simulation method is applied to simulate the compensation process. Through the simulation results, the proposed error compensation method proves its effectiveness and feasibility.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.99-109
• /
• 2004

This paper proposes precision evaluation method for the positioning error of three-DOF translational parallel mechanism. The proposed method uses conventional CMM as metrology equipment to measure the position of end-effector. In order to obtain accurate measurement data from CMM, the transform relationship between the coordinate system of the parallel mechanism and the CMM coordinate system must be identified. For this purpose, a new coordinate referencing (or coordinate system identification) technique is presented. By using this technique accurate coordinate transformation relationships are efficiently established. According to these coordinate transformation relationships, an equation to calculate error components at any arbitrary position of the end-effector is derived. In addition, mathematical fitting models to represent the position error components in the two-dimensional workspace of the parallel mechanism are also constructed based on response surface methodology. The proposed error evaluation method proves its effectiveness through the experimental results and its application to real three-DOF parallel mechanism.

• 대한원격탐사학회지
• /
• 제8권2호
• /
• pp.93-104
• /
• 1992

현재 한국표준지형도에서 사용되고 있는 횡단메카토르좌표(TM) 체제는 한반도 전체를 단일의 직각좌표 체계로 표시하는데 제한이 있다. 인공위성 원격탐사 및 지리정보 시스템의 광범 위한 응용과 함께, 직각좌표체계가 종래의 경위도좌표체계보다 이용에 있어서 보다 편리하고 효 과적이라 할 수 있다. 본 논문에서는 한반도 전체를 하나의 좌표구역으로 포함하는 통합된 직각 좌표체계를 제안함으로써 표준직각좌표체계 설정의 기반을 도모하고자 하였다. 표준지형도 제작 에 사용된 횡단메카토르 투영법을 그대로 유지하고, 기존의 TM좌표 및 UTM좌표를 약간 변형하 여 기준원점이 동경 127$^{\circ}$30'와 북위 38$^{\circ}$가 되는 직각좌표체계를 시도하였다. 경위도 좌표 에서 통합된 직각좌표로의 변환과정을 축척오차의 분포 문제와 함께 기술하였다.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.339-350
• /
• 2000

The three-dimensional new corrdinate system over a single hill double hills and complex terrain with a single hill and a rectangular obstacle was generated using a body-fitted coordinate system. Control of the coordinate line distribution in the field was executed by generalizing the elliptic generating system to Poisson equation. ▽2ξ=P. The new coordinate system was well fitted to the surface boundary of single hill and double hills. But in the case of complex terrain with hill and rectangular obstacle there was smoothing tendency around the rectangular obstacle. In order to show the validity of the body-fitted coordinate system the heat diffusion equation was transformed and the temperature distribution was calculated over the various terrain. The results showed the temperature distribution was very symmetrical and stable around hills and obstacle. As a result the couple of a body-fitted coordinate system and the heat diffusion equation were executed successfully. Wind field over complex terrain with hill and rectangular obstacle which represent urban area was simulated stably in body-fitted coordinate system. The qualitative result show the enhancement of wind speed at the upwind direction of a hill and a rectangular obstacle and the recirculation zone at the downwind direction.