• 산업기술연구
• /
• 제31권B호
• /
• pp.9-15
• /
• 2011

Nowadays, the Surveying field is growing rapidly in terms of technology such as TS(Total Station) surveying, photographic surveying, digital aerial photogrammetry, utilization of GIS(Geographic Information System) using high-resolution satellite imagery, obtaining 3D Coordinate using GPS. But control point surveying, benchmark measuring, and field Surveying are still performed by the engineers in the field. So, 3D yerrestrial laser scanner comes to the fore recently. 3D terrestrial laser scanner can get 3D coordinate about a number of sites of the subject in a short period with high accuracy. This paper compared the accuracy of data from the performance using 3D terrestrial laser scanner with that of TS. It also obtained the geopositioning accuracy result equivalent to the surveying result of TS. With further researches in the future, it is expected to be used not only in LiDAR itself but also in various areas like reconnaissance Surveying and construction by combining with TS or other Surveying equipments.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2209-2215
• /
• 2004

In the present research work, an automated machine vision system and a new algorithm to interpret the inspection data has been developed. In the past, the control of tolerance of front-chassis-module was done manually. In the present work a machine vision system and required algorithm was developed to carryout dimensional evaluation automatically. The present system is used to verify whether the automobile front-chassis-module is within the tolerance limit or not. The directional ability parameters related with front-chassis-module such as camber, caster, toe and king-pin angle are also determined using the present algorithm. The above mentioned parameters are evaluated by the pose of interlinks in the assembly of an automobile front-chassis-module. The location of ball-joint center is important factor to determine these parameters. A method to determine the location of ball-joint center using geometric features is also suggested in this paper. In the present work a 3-D best fitting method is used for determining the relationship between nominal design coordinate system and the corresponding feature coordinate system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.413-413
• /
• 2000

In this paper, we propose a series of calibrations f3r the x-ray three dimensional imaging system. In the developed x-ray system, a three dimensional inner and outer shape of an object can be reconstructed out of two dimensional transmitted x-ray image set, which are acquired by projecting x-ray to the object from different views. To achieve this, a reconstruction algorithm which estimates and updates the three dimensional volume from x-ray images is developed. The algorithm is named as uniform and simultaneous algebraic reconstruction technique(USART) which is an iterative method estimating a 3D volume based on its projected images. In this method, it is assumed that the imaging conditions that are the relative positions between the x-ray sources, object and the image planes are blown. Practically it is not easy to know the three dimensional coordinate of the components of the system, since the x-ray is not visible and the image distortions are present due to the optical components in the system. In this paper, methods of correcting image distortions are present firstly. Then the coordinates of the x-ray systems are calibrated from the x-ray images of the grid pattern. Some experimental results on these calibrations are present and discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.83-83
• /
• 2000

Recently, Vision system has being used all around industry. Sensor systems are used for Mark Reader, for example, optical scanning is proximity sensor system, have many disadvantages, such as, lacking user interface and difficulty to store original specimens. In contrast with this, Vision systems for Mark Reader has many advantages, including function conversion to achieve other work, high accuracy, high speed, etc. In this thesis, we have researched the development of Mark Reader by using a Vision system. The processing course of this s)'stem is consist to Image Pre-Processing such as noise reduction, edge detection, threshold processing. And then, we have carried out camera calibration to calibrate images which are acquired from camera. After searching for reference point within scanning area(60pixe1${\times}$30pixe1), we have calculated points crossing by using line equations. And then, we decide to each ROI(region of interest) which are expressed by four points. Next we have converted absolute coordinate into relative coordinate for analysis a translation component. Finally we carry out Mark Reading with images classified by six patterns. As a result of experiment which follows the algorithm has proposed, we have get error within 0.5% from total image.

• 산업기술연구
• /
• 제23권A호
• /
• pp.83-92
• /
• 2003

The previous control point surveying, being standardized by trigonometric point which hasn't been unified in the whole country and producing put into operation through complex calculation process, has many problems about accurate results and economic side. Because most of trigonometric points that standardize a present surveying are in situation in top of the mountain, there are many difficulties in solving sight problems. Since trigonometric points are far away from one another, Differences are created because of limitation of point distance, observatory network construction and distribution of error. In the information age, the study about acquiring three dimension surveying information that uses GPS has been processed as fast as acquiring topography information is getting important gradually. For utilizing GPS in surveying work, deciding transformation 7-Parameters that changes data about location information which is received by GPS receiver is important. In this study, it is decided transformation 7-Parameters that can be used in ka-pyoung area by using GPS surveying production that had put into operation.

• 한국측량학회지
• /
• 제26권6호
• /
• pp.611-616
• /
• 2008

모바일 매핑시스템 (Mobile Mapping Systems)에 장착된 카메라로부터, 3차원 데이터를 취득시, 취득된 3차원 데이터의 정밀도를 결정하는 중요한 요소 중 하나는 IMU/GPS와 카메라 좌표계간의 상대적인 위치(lever-arm)와 자세(bore-sight) 얼라인먼트이다. 기존 연구는 지상기준점(GPS)을 통하여 카메라의 절대표정을 계산하기 때문에, 하나의 좌표계 (GPS 좌표계) 상에서 이 얼라인먼트가 이루어진다. 이 방법은 GCP을 기본적으로 필요로 하는 단점이 있다. 본 논문에서는 GCP가 필요하지 않고, 연관성이 없는 카메라 데이터와 IMU/GPS 데이터를 통하여 이 두좌표계 간의 얼라인먼트를 계산하는 수학적 모델링을 제시한다.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1646-1652
• /
• 2015

본 논문에서는 집적영상에서 정치실영상을 재생하기 위한 깊이변환법을 제안한다. 종래의 집적영상은 재생상이 반전된 깊이로 재생되는 도치영상 문제가 있다. 재생상의 깊이는 개별 요소영상의 좌표에 의해 결정된다. 요소영상 획득과 재생시스템의 기하학적 관계를 분석하여 재생상의 깊이 변환 에 필요한 수식 유도가 가능하며 이를 이용하여 도치영상을 정치영상으로 변환할 수 있다. 제안하는 방법의 유용성을 보이고 또한 이론적 분석을 검증하기 위하여 실험을 수행하였고 그 결과를 제시한다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.65-71
• /
• 2024

In this study, we suggested a key-point detection method for robot harvesting of oriental melon. Our suggested method could be used to detect the detachment part and major composition of oriental melon. We defined four points (harvesting point, calyx, center, bottom) based on tomato with characteristics similar to those of oriental melon. The evaluation of estimated key-points was conducted by pixel error and PDK (percentage of detected key-point) index. Results showed that the average pixel error was 18.26 ± 16.62 for the x coordinate and 17.74 ± 18.07 for the y coordinate. Considering the resolution of raw images, these pixel errors were not expected to have a serious impact. The PDK score was found to be 89.5% PDK@0.5 on average. It was possible to estimate oriental melon specific key-point. As a result of this research, we believe that the proposed method can contribute to the application of harvesting robot system.

• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.191-207
• /
• 2005

Time delay exists inevitably in active control, which may not only degrade the system performance but also render instability to the dynamic system. In this paper, a novel active controller is developed to solve the time delay problem in flexible structures. By using the independent modal space control method, the differential equation of the controlled mode with time delay is obtained from the time-delay system dynamics. Then it is discretized and changed into a first-order difference equation without any explicit time delay by augmenting the state variables. The modal controller is derived based on the augmented system using the discrete variable structure control method. The switching surface is determined by minimizing a discrete quadratic performance index. The modal coordinate is extracted from sensor measurements and the actuator control force is converted from the modal one. Since the time delay is explicitly included throughout the entire controller design without any approximation, the system performance and stability are guaranteed. Numerical simulations show that the proposed controller is feasible and effective in active vibration control of dynamic systems with time delay. If the time delay is not explicitly included in the controller design, instability may occur.

• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.469-474
• /
• 2004

본 논문에서는 비 홀로노믹적인 구속조건을 갖는 수중 이동체의 위치 및 자세제어에 관한 제어기법에 대해서 논의한다. 비 홀로노믹시스템은 적분 불가능한 구속조건으로부터 도출되어지는 시스템으로 연속시간영역의 피드백제어로는 평형점에서의 안정화제어가 불가능한 특성을 가지고 있다. 본 연구에서는 속도의 비 홀로노믹 구속조건을 가지는 수중 이동체에 대하여 체인드폼으로 변환하고 변환된 시스템에 대해 백스테핑 제어기법을 적용하여 자세제어를 행하였으며 수치시뮬레이션을 통하여 제어기법의 유용성을 평가하였다.