• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.263-268
• /
• 2008

Building Integrated PV(BIPV) is one of the best fascinating PV application technologies. To apply PV module in building, various factors should be reflected such as installation position, shading, temperature, and so on. Especially a temperature should be considered, for it affects both electrical efficiency of a PV module and heating/cooling load in a building. This study investigates a semitransparent PV module that is designed as finished material for windows. Therefore it needs to considerate about the optical characteristics of the transparent module. It reports the effect of thermal and optical characteristics of the PV module on generation performance. The study was performed by measuring sun spectrum and luminance through the PV modules and by monitoring the temperature and experiment. The results showed that 1 degree temperature rise reduced about 0.48% of output power.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.41-47
• /
• 2015

Celadon shards from Gangjin and Buan were analyzed for their color, chemistry and microstructures. They exhibited similar chromatic characteristics in a $CIEL^*a^*b^*$ analysis. All of the glazes assessed showed comparable compositional areas, while the bodies from Gangjin shards had higher $RO_2$ concentrations. A high degree of similarity was also noted in the microstructures of the glaze and bodies from both regions. Anorthite crystals appeared in the glaze layer, and phase separation behavior developed around these crystals. This may have been caused by the glaze chemistry and the sintering process given the lengthy heating and cooling time. A Raman analysis indicated higher isolated $SiO_4$ unit ($Q_0$) values for the Buan samples. This can stem from the higher firing temperature or the longer sintering process.

• Journal of the Korean Institute of Educational Facilities
• /
• v.1 no.1
• /
• pp.21-32
• /
• 1994

It is time to put our top priority on the computer education to cope with rapid chage in technology and expansion of information. With 6th educational reform plan, from 1995 computer courses will be offered as elective subjects in the most of middle schools. However, detail planning for training of computer courses will be offered as elective subjects in the most of middle schools. However, detail planning for training of computer teachers and providing facilicles for computer education hasn't been adequately prepared yet, This will bring about confusion in computer education. The purpose of this study is to propose how to renovate the ordinary classroom into computer classroom. Followings are the suggestions for the educational specification for the renovated computer classroom for middle school in the urban area. 1) Purpose of computer classroom, 2) Size of computer classroom, 3) Curriculum design and class hour, 4) Facilities, 5) Environments, 6) Equipment and media(lighting and electric system, acoustical treatment, cooling/heating and ventilation system), 7) Activity area(Teacher workstation, Student workstation, Support area, Display surface). For the promotion of computer education, the legal, financial and administrative supports by concerned authorities should be established ahead of discussing the contents of computer education.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1312-1314
• /
• 1998

SOFC system is often subject to thermal cycle condition during normal start/stop, shutdown, and emergence state. Under the thermal cycle condition of heating and cooling, the SOFC components expand or shrink, which produces thermal stress and thermal shock. The SOFC performance is degraded by the thermal factors. To protect SOFC system from the thermal degradation, the optimum thermal condition must be clarified. In this study, to examine the thermal cycle characteristics, we fabricated single cells of planar SOFC with an area of $5{\times}5cm$. The electrolyte and PEN were tested under thermal cycle conditions in the range of$ 2-8^{\circ}C/min$. After thermal cycle test. crack creation of the components were examined using ultraviolet apparatus. No crack in the electrolyte and PEN were observed. The single cell system with alumina frame were also tested under thermal cycle conditions of 2, 3, $4^{\circ}C/min$. The single cell was fractured at the thermal cycle of 3 and $4^{\circ}C/min$ and the optimum condition of the thermal cycle to be found below $2^{\circ}C/min$.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.209-212
• /
• 2001

Aircraft industry is developed very fast so titanium scrap was generated to manufacture. Titanium scrap was wasted and used to deoxidize cast iron so we are study recycling of it. In this research were studied that metal hydride of reacted in hydrogen chamber of AMS4900, 4901, return scrap titanium alloy and sponge titanium granule. The temperature of hydrogenation was 40$0^{\circ}C$ in the case of pure sponge titanium but return scrap titanium alloy were step reaction temperature at 40$0^{\circ}C$ and 50$0^{\circ}C$, and after the hydride of titanium alloy were crushed by ball mill for 5h. Titanium hydride contains to 4wt.% of hydrogen theoretically as theory. It was determined by heating and cooling curve in reaction chamber. The result of XRD was titanium hydride peak only that it was similar to pure titanium. Titanium hydride Powder particle size was about 45${\mu}{\textrm}{m}$, and recovery ratio was 95w% compared with scrap weight for a aluminum foam agent.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.4
• /
• pp.33-39
• /
• 2016

A ground source heat pump (GSHP) system is recommended as a heating and cooling system to solve the pending energy problem in the field of air conditioning, because it has the highest efficiency. However, higher initial construction cost works as a barrier to the promotion and dissemination of GSHP system. In this study, numerical analysis on the characteristics of high density polyethylene (HDPE) pipe with spiral inside was executed. The heat transfer and flow characteristics of it were compared with those of a conventional smooth HDPE pipe. The heat transfer coefficient and pressure drop of the spiral HDPE pipe were higher than those of the smooth HDPE pipes at the same fluid flow rate. By decreasing the flow rate, the spiral HDPE pipe represented similar values of heat transfer coefficient and pressure drop to the smooth HDPE pipe. The lower flow rate of the spiral HDPE pipe comparing with it of the smooth HDPE pipe is estimated to reduce the length of the ground loop heat exchanger.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.895-899
• /
• 2001

Electrical properties of porous $BaTiO_3-based$ ceramics were investigated from the viewpoint of adsorbed oxygen. Namely, the effects of heat-treatment temperature ($450-600^{\circ}C$) and measuring atmosphere (oxygen and nitrogen) on the PTCR characteristics of the porous $BaTiO_3-based$ ceramics were investigated. It was found that the PTCR characteristics of the porous $BaTiO_3-based$ ceramics was developed at $\geq$55$0^{\circ}C$, and the magnitude of the PTCR characteristics increased with increasing heat-treatment temperature. It was also found that the magnitude of the PTCR characteristics in the porous $BaTiO_3-based$ ceramics increased in oxygen atmosphere, whereas decreased in nitrogen atmosphere during heating and cooling.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.67-74
• /
• 2015

This study aimed to develop a design manual to be used during the initial stage of the nearly Zero Energy Building (nZEB) design process. Recently, with the increased demand for nZEBs, there are many architects and architectural firms who are becoming interested in nZEB design. However, since the nZEB design process requires a different approach to the conventional building design process, architects have difficulties with application of the nZEB design process in their projects. Therefore, a design manual which can be used in the nZEB design process was developed in this study. Based on an intensive literature review, energy-saving strategies and their performance levels, which affect heating and cooling energy consumptions were established for a reference building. To analyze the sensitivity of each energy strategy to the overall performance, computer simulations using EnergyPlus were performed. At the same time, an Analysis of Variance assessment was conducted to estimate the relative importance of each energy factor. The energy sensitivity and priority of the energy factors was developed into a set of design guidelines.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.385-392
• /
• 2007

Poly (N-vinylpyrrolidone) (PVP) groups were grafted onto a poly(3-hydroxybutyrate-co-3-hydroryvalerate) (PHBV) backbone in order to modify its properties and synthesize a novel biocompatible copolymer. The crystallization behavior of PHBV and grafted PHBV was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). During the cooling-induced crystallization process, the crystallization temperature and the crystallization rate of the grafted PHBV decreased with increasing PVP weight fraction. On the heating scans of all grafted PHBV samples, a new crystallization exothermic peak appeared at almost the same temperature, suggesting the operation of a recrystallization process, while the melting temperature ($T_m$) and the apparent enthalpy of fusion (${\Delta}H_f$) were not affected by graft modification. During the isothermal crystallization process at the same temperature, the presence of side PVP groups decreased the spherulitic growth rate and the spherulitic band spacing with increasing PVP weight fraction in samples.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.72-77
• /
• 2008

About 25% of overall energy use of Korea had been spent in buildings. It is crucial to acknowledge the importance of saving energy in buildings. In order to save energy, it is important to predict accurate energy use. There are numerous energy simulation program that predicts both energy load and energy use. The problem of the energy simulation program is that it holds too many input variables, and it needs experts to model a building. So, our purpose of this study is to develop the simplified thermal load calculation program for building energy analysis which eliminates coordinates of building components instead of using full coordinates by using DOE2. Since the engine of the program is DOE2, we verified the validity of S-DOE by comparing peak heating & cooling load results and annual energy use results. The results shows that there are little difference between VisualDOE and S-DOE. Also it showed that S-DOE took less time to input variables than VisualDOE. These results reveals that the application of S-DOE is possible to accurately predict energy load and energy use of the building and still have strong point that it takes less time to analyse building energy.