• 토지주택연구
• /
• 제14권3호
• /
• pp.137-144
• /
• 2023

토공계획은 자연상태의 원지반 토량을 절취하여 흐트러진 상태의 토량을 운반하고 성토지반의 활용도에 따라 다짐을 하는 과정에서 토질의 체적변화를 고려하여 수립하여야 한다. 흙의 상태에 따른 체적의 변화를 구하기 위해 일반적으로 심도 2m 깊이에서 시험굴 조사를 통해 얻어진 토량환산계수를 사용하게 되며, 굴착 깊이에 따른 토질의 성질을 고려하지 않고 전체 토공량에 일률적으로 적용하다 보니 토공량 산정에 오차가 발생하고 있다. 특히 신도시 택지개발과 같이 대량의 토공량이 필요한 조성공사의 경우 작은 오차에도 토공량의 차이는 크게 발생하게 된다. 본 연구에서는 심도 2m이상 토질의 물리적 특성을 조사하고 기존의 설계기준인 심도 2m의 토량환산계수와 비교 검토한 결과 굴착 심도가 깊고 대규모 토공사의 경우 심도별 토량환산계수(C)를 적용할 경우 절토량을 줄일 수 있는 것으로 나타났다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.704-708
• /
• 2004

Recently, many nation have released standard such as IEC 61000-3-2 and IEEE 59, which impose a limit on the harmonic current drawn by equipment connected to AC line in order to prevent the distortion of an AC Line. Therefore, Plasma Display Panel (PDP) which is highlightened in digital display device also has the Power Factor Correction (PFC) circuit to meet the harmonic requirements. In PDP power module, the conventional boost converter is usually used for the PFC circuit. However, it comes serious thermal problem on it's bridge diode due to heat of PDP, and therefore the system stability is not guaranteed. In this paper, the bridgeless boost converter, which is used for PFC circuit of the PDP power module, is designed and verified the possibility of the application in a practical product in a view of efficiency, component count, temperature and etc.

• Journal of Advanced Marine Engineering and Technology
• /
• 제7권2호
• /
• pp.22-28
• /
• 1983

In former papers which were published already, authors had derived calculation formulae for the axial stiffness and the radial force conversion factor of crankshaft. In this paper, crankthrow axial stiffness and radial force conversion factors of actual engines are calculated by these theoretical formulae and then their characteristics are investigated. As the results, the axial stiffness and the radial force conversion factor of the latest super-long stroke engine are smaller than those of old-type engines. The influence of the former brings down the resonance speed of engine and the latter reduces the exciting force of axial vibration, but as the harmonic component of axial vibration force becomes rather strong, its effect of reducing is considerably canceled. In conclusion, as the latest super-long stroke engine is seemed to be liable to axial vibration of crankshafat, it is recommend that, in the design stage of propulsion shaft, its axial vibration condition must be more carefully checked.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.50-54
• /
• 2024

In this paper, we propose a theoretical method to systematically analyze the power conversion efficiency of a single-phase PFC switching rectifier. Boost-type PFC was organized in order of highest correlation with load current using steady-state analysis results and introduced the concept of loss factor. The loss factors for each major element are summarized and presented in a table. This paper makes it easier to understand the internal loss and power conversion efficiency of the rectifier for loss factors. Lastly, to confirm the validity of the efficiency analysis results reflecting the loss factors, loss and efficiency analysis of the 2.5kW PFC rectifier was performed. The results were compared with data from a 2.5kW PFC circuit for evaluation. As a result, the usefulness of power conversion efficiency analysis reflecting the loss factors proposed in this paper was confirmed.

• 한국해양학회지
• /
• 제21권3호
• /
• pp.131-135
• /
• 1986

階段形 初期海面攪亂이 定常狀態에 도달할 때 에 생기는 에너지 換(位置에 너지로부터 運動에너지로)에 대하여 고찰하였다. 無限少 攪亂의 경우 線形化가 가능 하며 이때 換比(生成된 運動에너지의 消滅된 位置에너지에 대한)는 初期攪亂의 水平的 規模가 커짐에 따라 1/3에 近接함이 解析的으로 밝혀졌다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1309-1310
• /
• 2006

High-purity and super-hard nano-polycrystalline diamond has been successfully synthesized by direct conversion from high-purity graphite under static pressures above 15 GPa and temperatures above $2300^{\circ}C$. This paper describes research findings on the formation mechanism of nano-structure and on the contributing factor leading to high hardness.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.217-223
• /
• 2009

계약전력 산정 방법에서 계약전력 환산율은 전력용변압기의 용량을 산정하는데 매우 중요한 기준이다. 본 연구에서는 AMR(자동검침시스템) 시스템에 의해 일반용전력사용고객(사무실, 상가, 호텔, 병원, 예식장, 기타)을 대상으로 각 수용가의 계약전력과 최근 5년 동안의 최대전력을 조사하였다. 조사된 자료의 전체 특징과 중심적인 경향을 알아 보기 위해서 평균값 등의 특징파라미터를 분석하였고, 회귀분석을 통한 선형적인 방법과 비선형적인 방법으로 그 경향을 분석하였다. 계약전력환산율과는 용도별로 다른 특성을 나타내고 있음을 확인하였으며, 전기사용고객의 특성을 고려한 계약종별 기준에 대한 체계적인 검토가 필요하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1425-1432
• /
• 2010

In large construction site, although soil conversion factor is so significant to preliminary design, operation design and calculating the cost of construction that it is important to take reasonable estimation and application, the standard of soil conversion factor for weathered ground doesn't clearly suggested yet. So in this study, at first we obtain the image using DSLR - high resolution camera and Laser scanner in the Haeng-Bok city constructin site, then analysis the ratio of soil and rock using various image processing method(Sobel method, Laplace method, Highpass filter, Hue and Saturation analysis). Mutual comparation with the result of image processing analysis and manual segmentation of 5case image in the cad. As a result, best image processing method was different for each case. In case of high propotion of rock, Laplace was best and in case of high propotion of soil, Highpass was best, and mixed case Laplace was best.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3275-3279
• /
• 2011

유무선망 상호접속 서비스 제공을 통한 통화요금의 사업자별 배부가 서비스 설비원가에 의하여 많은 부분이 정의되는 점을 고려한다면 망 설비를 통하여 제공되는 서비스들의 통화량 기준에 의한 평가가 이루어져야 한다. 이러한 관점에서 이동통신망 설비를 음성, 데이터서비스를 위한 전용설비와 공통설비로 구분하고, 공통설비는 합리적 기준에 의한 서비스별 설비원가의 배부 방법의 도출이 필수적이다. 본 논문에서는 유럽 GSM 시스템에서 이용되고 있는 이동통신망 공통설비 원가 배부 방안 분석을 통하여 국내 CDMA 이동망의 공통설비 원가 배부를 위한 회선 음성 서비스와 패킷 데이터서비스간의 단일 통화량으로 계측하기 위한 서비스간 환산계수 방안을 도출하였다.

• 천문학논총
• /
• 제18권1호
• /
• pp.25-35
• /
• 2003

In this paper, we have re-examined the relative sunspot numbers from June 1987 to December 2002 observed at Korea Astronomy Observatory. For this we determined conversion factors (K) for each year data to derive the relative sunspot numbers. The estimated conversion factor ranges from 0.57 to 1.09 and has a trend to decrease with time, which seem to depend on the several effects such as observational system, observation methods, and experience of an observer. Our analysis shows that the newly-determined relative sunspot numbers are in much better agreements with the international sunspot numbers than the previously-determined ones in which the conversion factors were determined only four times. This result implies that we should determine the conversion factor for each year data. From these investigations, we also identified one and half solar cycles form our relative sunspot number.