• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.811-818
• /
• 2010

This paper presents the results of a numerical investigation on behavior of deep excavation wall system supported by steel pipe struts. A series of three-dimensional finite element analyses were carried out on a deep excavation project site which adopted steel pipe struts. The results indicated that the mechanical behavior of steel pipe supported deep excavation is comparable to that of a conventional H-pile supported deep excavation, although the steel pipe supported system is required less number of struts than the conventional H-pile strut system. Also shown is that the sectional stresses of the steel pipe support system are within the allowable values implying that the steel pipe support system can be effectively used as an alternative to conventional H-pile support system.

• ETRI Journal
• /
• 제29권4호
• /
• pp.430-436
• /
• 2007

An OFDM/offset QAM (OQAM)-IOTA system uses the isotropic orthogonal transform algorithm (IOTA) function, which has good localization properties in the time and frequency domains. This is employed instead of the guard interval used in a conventional OFDM/QAM system in order to be robust for multi-path channels. However, the conventional channel estimation scheme is not valid for an OFDM/OQAM-IOTA system due to the intrinsic inter-symbol interference of the IOTA function. In this paper, a condition is derived to reduce the intrinsic interference of the IOTA function. This condition is obtained with the proposed pilot structure used for perfect channel estimation. We also derive the preamble structure appropriate for practical channel estimation of the OFDM/OQAM-IOTA system. Simulation results show that the OFDM/OQAM-IOTA system with the proposed preamble structure performs better than the conventional OFDM system, and it has the additional advantage of an increased data transmission rate which corresponds to the guard interval retrieval.

• 연구논문집
• /
• 통권33호
• /
• pp.111-122
• /
• 2003

The automatic assembly system of micro optical filter is a key technology in the development of optical modules with high functionality. In order to create such automatic assembly system of optical filter, we have developed the system and program capable of evaluation of $30\mum$-thick film optical filter as well as conventional optical filters performances. Moreover, we have carried out the evaluation of optical filter using developed system and program, and we have compared and analyzed them with by conventional hand work. As results, the measured performances based on the present system are more fast, precise and reliable then those of the conventional hand work. In addition to that, the system can apply for various optical collimators and filters.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.111-118
• /
• 2004

The automatic assembly system of micro optical filter is a key technology in the development of optical modules with high functionality. In order to develop an automatic assembly system of optical fiber and filter, we have firstly developed the system and program capable of characterization of 30${\mu}m$-thick film filters as well as conventional optical filters. Moreover, we have carried out the characterization of optical filter using the developed system and program, and compared experimental results with by conventional handwork. The measurement of optical filters using the present system is faster, more precise and more reliable than those based on the conventional handwork.

• 한국전자통신학회논문지
• /
• 제10권8호
• /
• pp.953-958
• /
• 2015

일반적으로 도시철도는 단거리를 짧은 운전시격으로 운행하는 특징을 가진 도시내 교통수단으로 요즘의 도시철도는 운영자의 요구에 따라 기관사가 없는 무인운전을 채택하는 추세이다. 이에 비해 일반 고속철도는 장거리 운행을 위하여 고속으로 운행하는 철도를 말한다. 일반 고속철도에는 도시철도와는 다르게 화물열차의 운행이라는 특수한 운행조건이 존재하며, 운영방식이 매우 다른 특성을 보이고 있다. 본 논문에서는 도시철도와 일반 고속철도의 운영방식을 비교하고 무선기반 열차제어시스템을 일반 고속철도에 적용하기 위한 조건을 제시하였다.

• 설비공학논문집
• /
• 제30권2호
• /
• pp.51-57
• /
• 2018

Recently, global warming has been a serious issue on the worldwide, and the importance of energy conservation is increasing. In most buildings, energy consumption increases due to cooling, heating, and ventilation. Because of these issues, researches have been carried out to reduce building energy. However, in most conventional forced-air system, the guidelines for the Air Handling Unit (AHU) discharge air temperature are not fully established. The purpose of this study is to assess the impact of AHU discharge air temperature, which is one of the important control variables, on the overall energy consumption and thermal comfort characteristics by modeling conventional forced-air system using EnergyPlus. In addition, recommendations for energy reduction in conventional AHU is provided.

• Journal of Nutrition and Health
• /
• 제31권3호
• /
• pp.354-362
• /
• 1998

The purposes of this study were to develop standardized indices of staffing needs in each school, foodservice system through work sampling methodology . Conventional school foodservices were classified into 5 groups depending on size of meals served. Commissary school foodservices were also classified into 5 groups by cluster analysis using number of meals served, number of satellite schools, and time for transportation of food. Work measurement through work sampling methodology was conducted in 15 conventional and 21 commissary foodservices during 3 consecutive days from September to October in 1995. Statistical data analysis was completed using the SAS programs for descriptive analysis, cluster analysis, and simple linear regression. The results were as follows : Average points of leveling factors of conventional and commissary foodservices were 1.066 and 1.061 , respectively. Mean labor hours per work force was 328 minutes and 366 minutes in conventional and commissary foodservice , respectively. Standardized work time was calculated using leveling factor, ILO allowance rate (175) , and observational work time. The model for standardized indices of staffing needs was developed based on simple linear regression in each school foodservice system. In conventional school foodservice systems(for 100-1,900 meals per day) standardized staffing needs=3.2497 +0.005267$\times$number of meals served (F=273.1, R-square 0.9750, p<0.001). In commissary school foodservice systems (for 200-1,600 meals per day ) Standardized staffing needs=3.393384 +0.0063$\times$number of meals served (F=30.78, R-square 0.6580, p<0.001).

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.69-72
• /
• 2007

In this paper, we analyze the performance of the network management system with intelligent mobile agent system. The proposed system dynamically selects appropriate its destinations. Thus, the system has an advantage of flexible network management in mobile network environments as well as dynamic change of traffic. Comparing its delay and throughput performance with the conventional SNMP based network management system, we find that the proposed mobile agent system performs better efficiency than the conventional one.

• KIEAE Journal
• /
• 제6권1호
• /
• pp.17-24
• /
• 2006

Daylight is a critical factor in architecture, as it enhances the working efficiency and visual comfort of the people working inside. Even though, low transmittance glazing has been used in the most office buildings in Korea. And it is reduced visual comfort in a indoor environment. So, we need to evaluation of quality for various daylighting systems to improve visual comfort This study aims to evaluate the visual comfort in a indoor environment by different daylighting system. For the purpose, four different daylighting systems-conventional window, conventional window with interior lightshelf, differentiated window, differentiated window with interior lightshelf-were selected and a questionnaire survey with 50 subjects were conducted. The results are as follows. Regardless daylighting systems, a view has an effect on visual comfort. A conventional system and conventional system with lightshelf were highly correlated between comfort and warmth. In case of differentiated window system were correlated between comfort and openness. Also, differentiated window with interior lightshelf were highly correlated between comfort and stability.

• 대한지역사회영양학회지
• /
• 제7권3호
• /
• pp.361-372
• /
• 2002

The purpose of this study was to investigate the operation and management systems of the school food services in Korea and to provide useful data for improving the quality of the school food services. This study was conducted in school food service operations nationwide using a written questionnaire. The questionnaires were mailed to the dieticians of three types of school food service systems-conventional, commissary, and joint-management. Of the 660 schools that participated in this study, the responses from 212 conventional system, 212 commissary system and 200 joint-management system services were selected for analysis. Statistical analysis was performed utilizing the SAS/Win 6.12 program so as the provide a descriptive statistics. The main results of this study can be summarized as follows: The average number of meals served per day was 1014, 738 and 695 in the conventional food service, the commissary food service and the joint-management flood service systems, respectively. Over half (58.9%) of food service facilities were utilizing computer programs for their operations. Most of the commissary flood service systems (52.4%) had a satellite school and served a maximum of 2000 meals per day. In most of the joint-management food service systems (87.1%), the number of food service schools managed was two and a maximum of 3330 meals were sewed. Only one dietician was posted irrespective of the school food service system. The mean hours of work by the dietician per day was 8.9, 8.6 and 8.6 in the conventional food service, the commissary flood service and the joint-management food service systems, respectively. The principal work functions of cook personnel were cooking and cleaning.