• 복식문화연구
• /
• 제21권4호
• /
• pp.521-534
• /
• 2013

This study aims to identify the formative features of inflatable fashion that has changed its form or fulfilled specific functions by inserting air between fabrics or between clothes and the human body. Images of inflatable fashion images after the 1990s were collected from the literature and internet data and were analyzed based on the formative features of inflatable design. Through this analysis, it was determined that there were four formative features of inflatable fashion: First, inflatable fashion has functionality. General fashion also has functionality, but inflatable fashion has expanded functionalities such as an air bag effect or insulation due to injected air. Second, the formative potential. Inflatable fashion can be changed into different forms depending on the amount of air injected. Light-weighted air holds up the material of the clothes. So new forms that are different from conventional fashion, which gives inflatable fashion its formative potential, can be suggested. Third, aesthetic expansion. Inflatable fashion when its volume is expanded expresses the beauty of scale, or expresses a voluptuous beauty when part of human body is exaggerated. Fourth, it has an unconstructive characteristic. Space that is visible due to the transparent material of inflatable fashion expresses the intention of the designer to fulfill an unconstructive concept. In conclusion, the formative features of inflatable design have formative significances : practicality, aesthetic significance, semantics and technical significance.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.378-383
• /
• 2013

Continuous fiber-reinforced ceramic matrix composites (CFCCs) have a complex distribution of porosity, consisting of interfiber micro pores and interbundle/interply macro pores. Owing to the complex geometry of the pores and fiber architecture, it is difficult to obtain representative microstructural features throughout the specimen volume with conventional, destructive ceramographic approaches. In this study, we introduce X-ray computed microtomography (X-ray ${\mu}CT$) to nondestructively analyze the microstructures of disk shaped and tubular $SiC_f$/SiC composites fabricated by the chemical vapor infiltration (CVI) method. The disk specimen made by stacking plain-woven SiC fabrics exhibited periodic, large fluctuation of porosity in the stacking direction but much less variation of porosity perpendicular to the fabric planes. The X-ray ${\mu}CT$ evaluation of the microstructure was also effectively utilized to improve the fabrication process of the triple-layered tubular SiC composite.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1448-1454
• /
• 2014

In this study, a new type of electrode device is implemented to measure the capacitance energy and interpret it as the ECG (Electrocardiogram) data. The main idea of this new electrode system is to estimate the capacitance on the skin by assembling a capacitive-coupled circuits and translate into the ECG signal. To measure the coupling energy and estimate the aquired data in terms of heart activity, the capacitive-coupled electrode is garmented with fabrics in the form of a chest band or a vest jacket. To compare the ECG data from the capacitive-coupled electrode with the conventional electrode(Ag-AgCl) system, the corelation coefficient between two signals is computed as 0.9517. Thus, we can conclude the fact that capacitive-coupled electrode system can measure a person's heart activity without any contact to his or her skin and can the interpreted as the ECG data.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• 패션비즈니스
• /
• 제15권5호
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.45-51
• /
• 2013

We developed a new antibacterial material, a non-woven fabric, a sulfur solution, and a new adhesive system to manufacture a new type of functional hybrid corrugated board in previous studies. Based on experimental data, the prototypes of functional hybrid corrugated boards were manufactured and their physical properties and functionalities, including antibacterial property and the freshness maintenance of sweet persimmon, were measured in this study. The functional hybrid corrugated board could be manufactured in the actual process with linerboards, non-woven fabrics, and other materials without any troubles, and was strong enough to be used as a packaging box for agricultural products. The antibacterial property of the hybrid corrugated board showed a value high enough to eliminate bacteria, which could deteriorate the sweet persimmons. Based on appearance observations, weight loss and firmness measurements, the freshness of sweet persimmons in the functional hybrid corrugated board was maintained better than it was in the conventional corrugated board.

• 패션비즈니스
• /
• 제2권2호
• /
• pp.77-84
• /
• 1998

As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.

• 복식
• /
• 제56권2호
• /
• pp.1-16
• /
• 2006

The purpose of this study is to analyze the meanings of national images represented in Vivienne Westwood' collections through investigating her works in an aspect of national identity. The results were as follows: British fashion is generally known for having two national identities, Monarchy and Anarchy. Monarchy is the traditional British look and Anarchy is the free-spirited look which is related with the postwar phenomenon of rebellious youth culture. As a punk, Westwood participated in creating Anarchic identity of British fashion. But from the 80s, Westwood's attitude toward the national images has been changed. As a high fashion designer who became to represent British fashion in global market, Westwood started to research British dress tradition, especially through comparing with French fashion. She was particularly fascinated with the traditional fabrics like tartans, tweeds and innovative tailoring skills, which were related with the heritage of Englishness in dress. But she didn't follow the conventional ways and tried to reinvent the historical tradition in modern ways. By combining Monarchic tradition with tempting female sexuality, Westwood transgressed the existing ordinary Britishness of British fashion which was composed of aristocratic and royal identities, and created some innovative British fashion images. With these works, Westwood contributed to consolidate Englishness in dress on the one hand, but on the other hand, served to reconfigure Britishness of British fashion. Consequently, Westwood showed that what is believed as the essential national fashion identity can be challenged and reconfigured in modern fashion field.

• 정보처리학회논문지C
• /
• 제10C권1호
• /
• pp.71-76
• /
• 2003

인터넷 사용자의 증가와 인터넷을 이용한 전자상거래(E-commerce)의 확산 그리고 네트워크 게임 등으로 인해 인터넷상의 사용자 데이터는 끊임없이 증가하고 있는 상태이다. 이러한 인터넷의 확산을 지원하기 위해 고속 통신을 가능하게 할 초고속 라우터가 상용화되는 추세이다. 고속의 패킷 라우팅 처리를 위해 고안된 라우터 구조를 살펴보면, 라인 인터페이스와 호스트 프로세서는 각각 제어용 프로세서를 가지고 있어 독립된 디바이스로 동작하며 패킷 스위칭과 고속의 패킷 포워딩, 신속한 FIB(Forwarding Information Base)처리 등을 구현하고 있다. 본 논문에서는 라우팅 정보를 관리하는 유니캐스트 및 멀티캐스트 라우팅 프로토콜과 OAM(Operation And Maintenance) 관련 패킷을 비포워딩(nonforwarding) 패킷으로 정의하고, 이를 처리하는 라인 인터페이스와 호스트 프로세서에서의 소프트웨어 구조를 제시하였다. 또한 분산 시스템에 요구되는 프로세서 간의 통신 메커니즘으로 프로세서간 통신 처리용 프로토콜(Inter-Processor Communication Message Protocol)을 설계 및 적용하여 기존의 UDP/IP를 이용하는 통신 메커니즘에 비해 성능이 향상됨을 확인하였다.