• 설비공학논문집
• /
• 제14권8호
• /
• pp.676-682
• /
• 2002

This paper has been made to investigate the thermal performance characteristics for the several types of heat sinks such as extruded heat sink, aluminum foam heat sink, layered heat sink. The various types heat sinks are prepared and tested for natural convection as well as forced convection. The experimental results for natural convection are compared to those for three types of heat sink so that the appropriate heat sink can be designed or chosen according to the heating conditions. The overall heat transfer performances for layered heat sink, extruded heat sink and aluminum foam heat sink are almost comparable to those under natural convection and forced convection. The forced convection of layered heat sink become 1.2 times as high as those of extruded heat sink, and the forced convection of extruded heat sink become 1.2 times as high as those of aluminum foam heat sink. This study shows that bar height, bar distance and number of bar for layered heat sink are important parameters, which have a serious influence on thermal performance for layered heat sinks.

• 태양에너지
• /
• 제8권1호
• /
• pp.33-40
• /
• 1988

The characteristics of thermal instabilities of natural convection in a horizontal fluid layer bounded below by a rigid plate and above by an interface with a passive gas is presented. The critical Grashof number decreases as the surface tension gradient effect (Marangoni effect) at the interface increases and the flow remains unstable for a critical Marangoni number depending on Prandtl numbers. These results are in substantial agreement with those of Smith and Davis.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.739-747
• /
• 2010

고온의 내부 원형 실린더가 존재하는 저온의 사각 밀폐계 사이의 온도차이에 의해 발생하는 자연대류에 관해 수치해석을 수행하였다. 본 연구는 내부의 원형 실린더를 표현하기 위해 유한 체적법에 기초한 가상 경계법을 사용하여 Ra = $10^7$ 에서 2 차원 비정상상태의 자연대류 현상에 대한 해를 얻었다. 더욱이 밀폐계의 수직 중심선에 따른 내부 원형 실린더의 위치 변화에 의한 열전달과 유동에 관한 영향을 연구하였다. 내부원형 실린더의 위치 변화에 따라 자연대류 현상은 비정상상태에서 정상상태로 변화 되었다. 연구 결과 두가지의 임계 위치를 얻을 수 있었다. 하부 경계는 0.05 인 지점이고 상부경계는 0.18 인 지점이다. 하부 경계와 상부 경계의 사이의 위치에서는 열 및 유동장이 정상상태임을 알 수 있었다.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.1-7
• /
• 2016

In the present study, the homogeneous model is used to simulate the natural convection heat transfer of the CuO-water nanofluid in a concentric annular enclosure. Simulations have been carried while the Rayleigh number ranges from $10^3$ to $10^6$, solid volume fraction ranges from 0.01 to 0.04 and the radius ratio varies between 0.1 and 0.7. Results are presented in the form of streamlines, isotherm patterns and averaged Nusselt numbers for different values of solid volume fraction, radius ratio of the annulus and Rayleigh numbers. The results show that by decreasing the radius ratio and/or increasing the Rayleigh number, the averaged Nusselt number increases. Also the heat transfer rate increases as increased solid volume fractions.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.147-154
• /
• 1992

Laminar natural convection heat transfer from a hot body in a square enclosure has been studied for various center positions of a hot square at Grashof number $Gr=1.5{\times}10^5$, Prandtl number Pr=0.71 and dimensionless thermal conductivity $k_g/k_f=14710$. The natural convection at the center position of a hot square; $X_c$, $Y_c=0.5$, 0.2 shows the most strong and at $X_c$, $Y_c=0.5$, 0.7 the most weak. The total mean Nusselt number at $X_c$, $Y_c=0.5$, 0.2 was 7.4% higher than that at $X_c$, $Y_c=0.2$, 0.5. The total mean Nusselt number at $X_c$, $Y_c=0.5$, 0.7 was 5.0% lower than that at $X_c$, $Y_c=0.3$, 0.5.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.778-784
• /
• 2012

In comparison with some other light sources, LED has merits such as increased life expectancy, fast response, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED has widely used in many industrial fields such as automotive, aviation, display, transportation and special lighting applications. Since the high heat generation of LED chips can cause a reduction in lifetime, degradation of luminous efficiency, and variation of color temperature, studies have been carried out on the optimization of LED packaging and heat sinks. In this study, experiments on measuring the heat generation rate of LED and the cooling performance of a heat sink were carried for analyzing the thermal characteristics of LED lighting system in free convection. From the results, dimensionless correlation on the cooling performance of heat sink in natural convection was proposed with Nusselt number and Rayleigh number as a guideline for designing cooling device of LED lightings.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.18.1-18.1
• /
• 2005

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.24.1-24.1
• /
• 2005

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.741-750
• /
• 1995

The turbulent buoyancy-driven flow in 2-dimensional enclosed cavities heated from the vertical side is numerically calculated for both cases of a Rayleigh number of 5*10$^{10}$ for air and 2.5*10$^{10}$ for water. Three different turbulence models are considered : standard k-.epsilon. model of Ozoe and low-Reynolds-number model of Lam and Bremhorst, and another low-Reynolds-number model of Davidson. The results indicate that the use of low-Reynolds number models is recommended for the indoor airflow computation, and the results from Davidson model are reasonably close to the reported experimental data. A sensitivity study shows that the amounts of wall-heat transfer and the velocity profiles with the Lam and Bremhorst model largely depend on the choice of the wall function for .epsilon..

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.10-19
• /
• 1995

Heat trnasfer for absorbing and emitting media in laminar layer along the cylinders has been analyzed. Governing equation are transformed to local nonsimilarity equations by the dimensional analysis. The effects of the Stark number, Prandtl number, Optical radius and wall emissivity are mainly investigated. For the formal solution a numerical integration is performed and the results are compared with those obtained by P-1 and P-3 approximation. The results show that boundary layers consist of conduction-convection-radiation layer near the wall and convection-radiation layer far from the wall. As the Stark number of wall emissivity increases the local radiative heat flux is increased. The Pradtl number or curvature variations do not affect the radiative heat flux from the wall, but The Prandtl number or wall emissivity variations affect the conduction heat flux. Consequently the total heat flux from the wall are affected by the Prandtl number or wall emissivity variation.