• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.878-885
• /
• 1997

Effect of various ingredients and cooling methods on the quality of modified Jeung-pyun(traditional Korean steamed rice cake) were studied. Three different kinds of wheat flours(strong, medium, and weak) were studied to evaluate the volume and firmness of Jeung-pyun. Weak flour showed the maximum volume and good sensory results. The optimum ratio of ingredients was flour : water ; sugar ; Tak-Ju=100 : 20 : 20 : 50 for steaned Jeung-pyun. When three different cooking methods were compared, the maximum volume showed from convection oven method, but the crust color of Jeung-pyun was like bread. Steaming method showed higher volume than that of product heated by microwave method. The optimum formula ratio for the microwave method was flour ; water ; sugar ; Tak-Ju = 100 : 30 : 20 : 50, which required 10% higher added water content than that of steaming. When wheat flour was used instead of rice flour, the addition of 5% normal corn starch increased volume of both steamed and microwave cooked products. In the case of added modified starches to Jeung-pyn, 5% $\alpha$-waxy corn starch showed the highest volume in steaming method. When rice flour was used, the addition of 5%$\alpha$-waxy corn starch also showed highest volume f both steamed and microwave cooked products. The firmness of steamed wheat flour Jeung-pyun, containing 5%$\alpha$-corn starch was higher firmness than that of control and other added samples. Microwave cooked products showed two or three times higher firmness of steaming products. The use of wrap(uni-wrap) and stabilizer(METHOCEL) decreased the firmness of microwave cooked wheat flour Jeung-pyun to 200~300g compared with that of untreated Jeung-pyun.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1383-1389
• /
• 2011

The current study focuses on the consistent analysis of heat transfer in multichannel volumetric solar receivers used for concentrating solar power. Changes in the properties of the absorbing material and channel dimensions are considered in an optical model based on the Monte Carlo ray-tracing method and in a one-dimensional heat transfer model that includes conduction, convection, and radiation. The optical model results show that most of the solar radiation energy is absorbed within a very small channel length of around 15 mm because of the large length-to-radius ratio. Classification of radiation losses reveals that at low absorptivity, increased reflection losses cause reduction of the receiver efficiency, notwithstanding the decrease in the emission loss. As the average temperature increases because of the large channel radius or small mass flow rate, both emission and reflection losses increase but the effect of emission losses prevails.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.78-78
• /
• 2011

수자원 확보를 위해 건설된 저수지는 내외부위의 여러 가지 환경영향으로 인해 수질문제가 종종 발생한다. 이런 수질문제에 대처하기 위해 다양한 형태의 수질개선 장치가 고안되어 적용되고 있으며, 물순환장치도 그 중에 하나이다. 물순환장치는 수층에 산소를 공급하고 표층의 조류제어, 이취미 제거 등 다양한 목적으로 사용된다. 본 연구에서는 저수지에 설치된 대류식 물순환장치의 수질개선 효과를 평가해 보았다. 수체가 큰 저수지에서의 조사는 매우 어려운 점이 있으나, 조사방법은 물순환장치로 부터 일정거리에서 수심별 수질조사를 실시하였으며, 물순환장치가 가동되는 지역과 장치가 없는 지역에 대한 조사를 실시하여 그 차이 만큼을 수질개선 효과로 평가하였다. 현장조사는 물순환장치로부터 1m, 3m, 5m, 7m, 10m, 13m, 15m 떨어진 지점에서 유속과 수질조사를 실시하였으며, 유속은 표면유속만 측정하였고 수질은 수표면에서부터 저수지 바닥까지 조사를 실시하였다. 조사기간 동안 수체의 물리적 조건은 계절에 따라 다양한 변화를 보였으나, 양수된 저층수의 흐름은 수평방향으로 흘러들어가면서 온도변화에 따라 혼합되거나 하강하는 것으로 나타났다. 심층 혐기성층이 발달된 상황에서 물순환장치의 가동은 물순환장치 흡입구 근처의 혐기성층을 흡입하여 표층으로 확산시켰고 이로인해 주변의 수체가 물순환장치 흡입구로 밀려오면서 심층의 혐기성층이 약화되는 현상을 나타냈다. 조류가 발생한 기간중에 물순환장치에 의한 조류제어 효과는 심층수가 상승하여 확산되는 수평방향으로 반경 약 10m 지점까지 조류농도가 낮아지는 것을 확인할 수 있었으며 조류농도가 낮아지는 기간에는 그 영향범위가 조금 적어지는 것으로 나타났다. 이러한 결과로 볼때 저수지에 설치되어 운영되는 대류식 물순환장치는 심층의 혐기화 개선과 표층의 조류제어에 효과가 있는 것으로 판단할수 있으나, 조류제어에 대해서는 좀 더 심도있는 조사가 필요할 것으로 판단되었다.

• Atmosphere
• /
• v.18 no.4
• /
• pp.387-395
• /
• 2008

The impact of horizontal resolution on a regional climate model was investigated by simulating precipitation over the Korean Peninsula. As a regional climate model, the SNURCM(Seoul National University Regional Climate Model) has 21 sigma layers and includes the NCAR CLM(National Center for Atmospheric Research Community Land Model) for land-surface model, the Grell scheme for cumulus convection, the Simple Ice scheme for explicit moisture, and the MRF(Medium-Range Forecast) scheme for PBL(Planetary Boundary Layer) processing. The SNURCM was performed with 20 km resolution for Korea and 60 km resolution for East Asia during a 20-year period (1980-1999). Although the SNURCM systematically underestimated precipitation over the Korean Peninsula, the increase of model resolution simulated more precipitation in the southern region of the Korean Peninsula, and a more accurate distribution of precipitation by reflecting the effect of topography. The increase of precipitation was produced by more detailed terrain data which has a 10 minute terrain in the 20 km resolution model compared to the 30 minute terrain in the 60 km resolution model. The increase in model resolution and more detailed terrain data played an important role in generating more precipitation over the Korean Peninsula. While the high resolution model with the same terrain data resulted in increasing of precipitation over the Korean Peninsula including the adjoining sea, the difference of the terrain data resolution only influenced the precipitation distribution of the mountainous area by increasing the amount of non-convective rain. In conclusion, the regional climate model (SNURCM) with higher resolution simulated more precipitation over the Korean Peninsula by reducing the systematic underestimation of precipitation over the Korean Peninsula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.476-483
• /
• 2007

One of the main function of Ieodo Ocean Research Station is to service the information about the weather and fishing grounds condition which are collected through calibrating convection flow and ocean current around the station. However, due to the influence of the station's structure below sea level, it is difficult to obtain the exact flow data. Therefore, it is required to research on the effect of the structure and the method to evaluate and revise the observed data. In this paper, as a basic study, it deals with the algorithm that simulate the interaction between ocean current and the station structure, followed by discussions about the way to applicate the algorithm. Through 3-dimensional computational fluid dynamics analyses (using Navier-Stokes equations with K-turbulence model), the influence of the station and submerged rocks are quantitatively evaluated, and we would suggest methods how to obtain accurate flow information from the measured rough data.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.104-115
• /
• 1999

There have been many studies on the two dimensional thermo-elasto-plastic analysis in welding process, mostly from viewpoint of residual stresses. In this study, the temperature distribution, transient thermal stress, and angular distortion during bead-on-plate gas metal arc welding of rectangular plates were analyzed by using the finite element method. A nonlinear heat transfer analysis was first performed by taking account of the temperature-dependent material properties and convection heat losses on the surface. This was followed by a thermo-elasto-plastic stresses and distortion analysis that incorporates the constrained boundary condition of the two dimensional solution domain to get the three dimensional size effect of the plate. The constrained boundary conditions adopted in this study were the constant displacement condition over the whole two dimensional section for axial movement in the welding direction, and the force boundary condition for rotational movementof the domain around the axis of the welding direction. It could be revealed that the theoretical predictions of the angular distortion have an improved agreement with the experimentally obtained data presented in the previous study.

• Structural Engineering and Mechanics
• /
• v.75 no.5
• /
• pp.571-583
• /
• 2020

Permeation grouting is of great significance for consolidating geo-materials without disturbing the original geo-structure. To dip into the filtration-induced pressure increment that dominates the grout penetration in permeation grouting, nonlinear filtration coefficients embedded in a convection-filtration model were proposed, in which the volume of cement particles in grout and the deposited particles of skeleton were considered. An experiment was designed to determine the filtration coefficients and verify the model. The filtration coefficients deduced from experimental data were used in simulation, and the modelling results matched well with the experimental ones. The pressure drop revealed in experiments and captured in modelling demonstrated that the surge of inflow pressure lagged behind the stoppage of flow channels. In addition, both the consideration of the particles loss in liquid grout and the number of filtrated particles on pore walls presented an ideal trend in filtration rate, in which the filtration rate first rose rapidly and then reached to a steady plateau. Finally, this observed pressure drop was extended to the grouting design which alters the water to cement (W/C) ratio so as to alleviate the filtration effect. This study offers a novel insight into the filtration behaviour and has a practical meaning to extend penetration distance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4749-4755
• /
• 2014

In this study, to maximize the heat release from the heat generating environment, such as a high-capacity inverter, the heat release performance of the extruded-type heat sinks with the variation of the base thickness were investigated using the experimental and numerical methods. The base thickness was varied from 5 to 14 mm. The heat release was characterized by the amount of heat released through the heat sink, the surface temperature of heat sink base between the heat sources, and temperature of heat sources. The surface temperatures between heat sources and the amounts of heat release were improved more as the base thickness was decreased. In contrast, the temperatures of the heat sources decreased with increasing base thickness. Based on the case study of these heat sinks, it is believed that a heat sink with a 9.5mm-thick base was optimized for the heat release.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.9-17
• /
• 2005

The wake patterns and thrust characteristics of dual flapping airfoils in a biplane configuration are investigated using an unsteady panel method. To trace complicated wake shapes behind airfoils, a core addition scheme, a vortex core model, and the fourth order Runge-Kutta convection scheme are employed. Present results are verified by comparing them with flow visualization, exact solution and published computed results. The thickness and camber of thick airfoils has an effect of decreasing thrust. The airfoils produce maximum thrust when the phase angles between plunging and pitching motions are both 90 and 120 degrees. Thrust increases as the plunge velocity is increased, which is also found as the pitch amplitude is stepped up. Thrust decreases when the distance between the airfoils is less than 0.6c.

• Solar Energy
• /
• v.12 no.3
• /
• pp.28-36
• /
• 1992

The performance of a latent heat storage system using a thermosyphon as the heat transfer device between the heat source and the phase change material was investigated experimentally. In order to increase the effective conductivity of the phase change material, layers of copper wire mesh were immersed in the paraffin wax(Sunoco P-116) in such a way that they also may be considered as fins of the thermosyphon. The important results are as follows : (1) The void space of the wire mesh allowed the convection to occur, thus enhanced the performance of the system : (2) The increase of the number of layer of wire mesh increased the conduction heat transfer. However, it also had adverse effect of subduing convective motion of liquid wax : and (3) Overall heat transfer coefficient and thermosyphon conductance increased with the increase of the number of layer of wire mesh, whereas the heat transfer coefficient between the thermosyphon and the wax decreased.